Color g10 liners in stock (5"x3" and 10"x6"). Carbon fiber boards, rods, and tubes

[tiancode]

All nice colors are in stock! We offer them in 5"x3" and 10"x6". Only one thickness: 1/16" or 0.06"

To order, go to our web store

Please note, the blue and dark brown have more texture visible on the surface, as shown in picture. Their cross section look just fine.

 

[tiancode]

Aerospace Grade Void-Free Carbon Fiber Material for Knife Making

To place orders, go to our web store

• $28 - 1/4" thickness all woven, in 5"x3"
• $24 - 3/16" thickness all woven, in 5"x3" and 10"x6"
• $18 - 1/8" thickness all woven, in 5"x3" and 10"x6"
• $12 - 1/8" thickness standard laminated, in 5"x3" and 10"x6"

 

[tiancode]

Carbon fiber rods and tubes for knife making 1/16" to 3/8"

To order, go to our web store

• 3/8" Rod
• 1/4" Rod
• 3/16" Rod
• 1/8" Rod
• 1/16" Rod
• 3/8" Tube
• 1/4" Tube
• 6mm Rod
• 4mm Rod
• 2mm Rod
• 6mm Tube

 

[tiancode]

New Batch Just arrived. This stunning material is one layer of premium grade natural abalone sheet sandwiched by two layers of acrylic of 5mm and 1mm in thickness, respectively. The extra bright acrylic is totally transparent, not dyed. The same piece displays multiple colors at the same time: green, blue, purple, yellow, and more. The acrylic layers serve as a protective layer, also make the material much easier to work with.

Thickness: 6mm (1/4")

Three different sizes:
Small Knife Scales: 4.25" x 1.75", two pieces in a pair - $20
Large Knife Scales: 5.00" x 1.75", two pieces in a pair - $28
Sheet: 9.5"x5.5", one piece - $62


Click Here to Order

 

[P. McKinley]

I'm looking for 3/16" or 4mm tube. Would you be getting any in the near future?

-Peter

 

[tiancode]

3/16" or 4mm seem a bit small for tubes; I will look into it. Thanks.

 

[Frank Niro]

I'm very slow at this computer thing but tried hard to get to G-10 colors and sizes listed together.Are they in your site together? Are you expecting to be selling any carbon fibre with some color?
Frank

 

[tiancode]

Yes Frank, they are all on one product page. 9 colors and two sizes.

• Link to the g10 liners of all colors and sizes
• Link to the rods

Carbon fiber only has one color, black (or if you look from certain angles, a very dark gray). I suppose you were asking about rods? YES, we are getting glass fiber/g10 rods in all 9 matching colors as well. But for us to meet the minimal order requirement of each color, it will be a huge purchase. That translates to more risks, and slow. Please be patient.