- Joined
- Mar 27, 2007
- Messages
- 97
Hi Guys, I have a few up for sale today. These are up on a couple of place on a first come, first serve basis, so shoot me an email Powell.josh@gmail.com or hit me with a message to pick one of these up.
First up is a Chef style fighter in 3/16" 154CM. Blade is 5 7/8" from the front of the bolster, overall length is 10 3/4". Bolster is 304 stainless, with a nice curve into a carbon fiber scale. Heat treat is by the guys at Texas Knife Makers supply, should be right around 58/59 HRC. Nice fit and finish, and clean overall appearance. Kydex sheath with belt/IWB/pocket clip is included. Price is $255 + shipping. And sold in 10 minutes. That's a new record!
Up next is a wharncliff in differentially heat treated 1095, with a simple hamon. Steel is 3/16" thick, 3 3/8" blade, 7 7/8" Overall length. Handle onlay is textured carbon fiber. Kydex sheath setup for a large tek lok. I can modify the sheath to for a clip for an additional $10. Price is $100 + Shipping. SOLD
A drop point hunter, differentiall HT'd 1095. 4" edge, 9 1/8" overall length, 3/16" thick 1095. $85 + shipping.
Here is a 5" Medium drop point with swedge. Blade is .32" thick and 5" long, handle is 4 3/4". Olive drab cord wrap. Kydex sheath with belt/IWB/pocket clip is included. Blade is scratching every so slightly in it's sheath (not pictured, but if you are intrested, I'll try to get photos), and it's been sitting around for a while, so I'm reducing the price to $105 + shipping. (from $145 originally).
Also still have a a couple modified tanto forge brutes in 1/4" 5160 available. Blades are both 4 1/8", 8 1/8" overall length. Up one in a black cord wrap, one in tan. The one with the black cordwrap is scratching slightly in it's sheath (can be seen in the first image, and the clip has a couple of minor rust spots, so I'll let it go for $80 + shipping. $90 for the tan.
In Tan for $90 + shipping.
In black for $80 + shipping.
First up is a Chef style fighter in 3/16" 154CM. Blade is 5 7/8" from the front of the bolster, overall length is 10 3/4". Bolster is 304 stainless, with a nice curve into a carbon fiber scale. Heat treat is by the guys at Texas Knife Makers supply, should be right around 58/59 HRC. Nice fit and finish, and clean overall appearance. Kydex sheath with belt/IWB/pocket clip is included. Price is $255 + shipping. And sold in 10 minutes. That's a new record!
Up next is a wharncliff in differentially heat treated 1095, with a simple hamon. Steel is 3/16" thick, 3 3/8" blade, 7 7/8" Overall length. Handle onlay is textured carbon fiber. Kydex sheath setup for a large tek lok. I can modify the sheath to for a clip for an additional $10. Price is $100 + Shipping. SOLD
A drop point hunter, differentiall HT'd 1095. 4" edge, 9 1/8" overall length, 3/16" thick 1095. $85 + shipping.
Here is a 5" Medium drop point with swedge. Blade is .32" thick and 5" long, handle is 4 3/4". Olive drab cord wrap. Kydex sheath with belt/IWB/pocket clip is included. Blade is scratching every so slightly in it's sheath (not pictured, but if you are intrested, I'll try to get photos), and it's been sitting around for a while, so I'm reducing the price to $105 + shipping. (from $145 originally).
Also still have a a couple modified tanto forge brutes in 1/4" 5160 available. Blades are both 4 1/8", 8 1/8" overall length. Up one in a black cord wrap, one in tan. The one with the black cordwrap is scratching slightly in it's sheath (can be seen in the first image, and the clip has a couple of minor rust spots, so I'll let it go for $80 + shipping. $90 for the tan.
In Tan for $90 + shipping.
In black for $80 + shipping.
Last edited:
