CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,704
Good Afternoon,
This blade is made from 1/4" AEBL ground to 400 and finished on an ultra fine scotch brite belt. The blade has an aggressive distal taper, it is 0.250 at the guard, 0.190 around the center and 0.08 behind the tip. The knife balances at the back side of the guard and is very light and fast at 6.3 ounces.
The handle is a stabilized epoxy filled zebra shin bone round with leather spacers and wrought iron fittings. The butt cap is treaded on the tang and then the tang was peened over. The guard is hot fit and is very tight. The bone will remain dimensionally stable and waterproof.
It comes with a leather sheath with multiple mounting options. There is a guard strap so the sheath can be mounted using the eyelets and there is a removable belt loop.
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 1/4" AEBL
Grind: Full Flat
Blade: 6 5/8"
Handle Material: Zebra shin bone with leather spacers and wrought iron fittings
Overall Length: 11 1/2"
Sheath: Hand tooled leather
Hardness: 60rc
Weight: 6.3 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
This blade is made from 1/4" AEBL ground to 400 and finished on an ultra fine scotch brite belt. The blade has an aggressive distal taper, it is 0.250 at the guard, 0.190 around the center and 0.08 behind the tip. The knife balances at the back side of the guard and is very light and fast at 6.3 ounces.
The handle is a stabilized epoxy filled zebra shin bone round with leather spacers and wrought iron fittings. The butt cap is treaded on the tang and then the tang was peened over. The guard is hot fit and is very tight. The bone will remain dimensionally stable and waterproof.
It comes with a leather sheath with multiple mounting options. There is a guard strap so the sheath can be mounted using the eyelets and there is a removable belt loop.
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 1/4" AEBL
Grind: Full Flat
Blade: 6 5/8"
Handle Material: Zebra shin bone with leather spacers and wrought iron fittings
Overall Length: 11 1/2"
Sheath: Hand tooled leather
Hardness: 60rc
Weight: 6.3 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Last edited:
