Copperhead EDC

[J. Hoover]

CopperHead Model EDC
Steel- O1 Tool Steel 5/32nd thick
Grind- Hollow Ground
Blade- 3 3/4 inches to the plunge cuts, 1 3/8 inches wide at its highest point
AOL- Just a shade over 8 1/2 inches
HT- Heated to 1100F and allowed to cool to room temp, then heated to 1500F and held at temp for 15 minutes followed by an immediate agitated quench in cooking oil.
Temper- Tempered at 400 degrees for 2, two hour cycles.
Handles are Cocobolo laminate with 3/16 brass pins.
Dual carry hand sewn fitted sheath holds the blade nice and secure for a worry free comfortable carry.
Asking 65.00 shipped in lower 48
All comments are welcome

I back all my knives with a 110% MBG if your not satisfied. All I ask is that you use it for a knife, not a jackhammer and let me know by e-mail within three (3) days of receiving it. Then send it back, I'll refund the selling price plus 10% to cover your shipping cost.

View attachment 105317

View attachment 105319

View attachment 105320

View attachment 105321

View attachment 105322

 

[Sproles]

I have a High Gear Altimeter/Compass/Barometer, etc that I am selling - would you be interested in a trade. I have a link for it over at EDC Forums and also at CandlePower Forums.

Thought I would look into it with you - the knife is GORGEOUS!

Sproles

 

[J. Hoover]

Thanks Sproles, I appreciate the kind words. I think I'll leave this one up for a while before considering a trade, thanks for the offer though.

 

[J. Hoover]

Back to the top with a price reduction.

 

[ombrapelone]

If I could put a word, your sheath are among the best I own. Thinking that come with one of your knife the set is a bargain!

 

[J. Hoover]

Back for another ride.