- Joined
- May 9, 2014
- Messages
- 104
Hello blade forums friends -
I was sitting at my desk today looking at a couple Bushbuck EDC prototypes I made a couple months back. Honestly, they are exactly that, prototypes. These two knives have a blasted finish on the blade, however, the issue was that the media we used was a bit too course which looked pretty bad **s until we went to engrave our logo on it. The coarser matt finish and the laser just didn't get along all that well, and therefore the logo is just not up to my standards. So I resolved the issue moving forward and put these two knives in my drawer. Sitting here today, I realized that they are perfectly functional knives and may make someone happy at a good price. So, I figured I would ping blade forums first to see if anyone was interested before putting them up on the website.
Some specifics: These are our Bushbuck model (see our website for other bushbucks at www.mgmknives.com), both have G10 handles. One in black and other in olive green. They are both made from CPM154 and both tested out at just above 60Rc. They have a blasted finish and have thumb grooves on the top of the blade for additional grip. They come in at about 8" OAL, and tip to handle of about 3-3/4". Weight is approx. 6.4oz. I will supply them with your choice of a soft sided zippered case or a basic leather sheath. Each will come complete in a walnut presentation box and a certificate of authenticity. Price is $100 for the black and $95 for the green. As always, please let me know if you have any questions, and check our website for the latest knives.
Thanks so much!
I was sitting at my desk today looking at a couple Bushbuck EDC prototypes I made a couple months back. Honestly, they are exactly that, prototypes. These two knives have a blasted finish on the blade, however, the issue was that the media we used was a bit too course which looked pretty bad **s until we went to engrave our logo on it. The coarser matt finish and the laser just didn't get along all that well, and therefore the logo is just not up to my standards. So I resolved the issue moving forward and put these two knives in my drawer. Sitting here today, I realized that they are perfectly functional knives and may make someone happy at a good price. So, I figured I would ping blade forums first to see if anyone was interested before putting them up on the website.
Some specifics: These are our Bushbuck model (see our website for other bushbucks at www.mgmknives.com), both have G10 handles. One in black and other in olive green. They are both made from CPM154 and both tested out at just above 60Rc. They have a blasted finish and have thumb grooves on the top of the blade for additional grip. They come in at about 8" OAL, and tip to handle of about 3-3/4". Weight is approx. 6.4oz. I will supply them with your choice of a soft sided zippered case or a basic leather sheath. Each will come complete in a walnut presentation box and a certificate of authenticity. Price is $100 for the black and $95 for the green. As always, please let me know if you have any questions, and check our website for the latest knives.
Thanks so much!
Last edited:
