- Joined
- Mar 27, 2015
- Messages
- 3,025
Happy Thanksgiving.
Some rare ones today.
All prices are shipped to the CONUS. What you see is what you pay.
Payment method is PayPal F&F due to PayPal’s new tax reporting. Can discuss other payment methods via PM if needed.
Please limit questions and comments to PM or email.
I reserve the right to sell at my discretion. It is your responsibility to ensure you comply with your local laws.
Thanks for looking.
HDFK D2 Prototype
SOLD
Steel is PSF27, a significantly tougher and more stainless version of D2 with an optimized heat treatment.
Only 2 sales on this version for a total of 21 pieces, making this version very rare.
Specs:
PSF 27 D2, tested 61-62 HRC, .220" thick at ricasso
Total length 11.825"
Blade length 6.5"
Weight 12.8 oz
Grippy 3D black micarta machined scales
Black oxide treated 18-8 stainless steel fasteners
Mashed Cat kydex with dangler
new and unused
light application of Frog Lube
CPK Keffeler Competition Chopper
SOLD
Note: This is the small grip configuration
Specs:
V4E 63 HRC, .312 at ricasso (5/16")
Total length 15.0"
Blade length 10.0"
Blade width 2.0"
Weight 22.7 oz
Grippy 3D TeroTuf machined scales
Black oxide treated 18-8 stainless steel fasteners
Forward lanyard ready
Small configuration
Racing Edge
new and unused
light application of Frog Lube
Nathan:
“The CPK-Keffeler Competition Cutter is a true high performance Blade Sports competition knife with an impressive racing pedigree. This is not a beginners knife nor is it an entry level knife, it is designed to perform at the highest levels of Blade Sports competition.
It's made of Uddeholm Vanadis 4 Extra SuperClean at HRC 63+ with an optimized heat treat similar in nature to the Delta protocol used for our Delta 3V. This material with this heat treat protocol delivers what I feel is the finest steel available for this application anywhere. I think it will outperform anything out there in this application and has dethroned CPM M4 as the king of steels with more world championships in recent history than any other steel.
Competitors are judged not only on their time and accuracy of cuts, points are deducted for damage to the knife. This steel with this heat treat resists bent bevels and chipped or rolled edge at thinner sections than other options allowing a thinner sharper knife which gives you a competitive advantage.
The grip is a little strange looking at first but makes sense once you're familiar with it. It is not a new or experimental design, it's based closely on a grip with three world championships on it that has proven to work well for a lot of different people with different hands.
The shallow S bevel geometry, edge angle and thickness are all based on proven geometry with many wins.
These knives will arrive fiendishly sharp and ready to race. They can be returned to be resharpened to race ready for a reasonable cost.”
Some rare ones today.
All prices are shipped to the CONUS. What you see is what you pay.
Payment method is PayPal F&F due to PayPal’s new tax reporting. Can discuss other payment methods via PM if needed.
Please limit questions and comments to PM or email.
I reserve the right to sell at my discretion. It is your responsibility to ensure you comply with your local laws.
Thanks for looking.
HDFK D2 Prototype
SOLD
Steel is PSF27, a significantly tougher and more stainless version of D2 with an optimized heat treatment.
Only 2 sales on this version for a total of 21 pieces, making this version very rare.
Specs:
PSF 27 D2, tested 61-62 HRC, .220" thick at ricasso
Total length 11.825"
Blade length 6.5"
Weight 12.8 oz
Grippy 3D black micarta machined scales
Black oxide treated 18-8 stainless steel fasteners
Mashed Cat kydex with dangler
new and unused
light application of Frog Lube
CPK Keffeler Competition Chopper
SOLD
Note: This is the small grip configuration
Specs:
V4E 63 HRC, .312 at ricasso (5/16")
Total length 15.0"
Blade length 10.0"
Blade width 2.0"
Weight 22.7 oz
Grippy 3D TeroTuf machined scales
Black oxide treated 18-8 stainless steel fasteners
Forward lanyard ready
Small configuration
Racing Edge
new and unused
light application of Frog Lube
Nathan:
“The CPK-Keffeler Competition Cutter is a true high performance Blade Sports competition knife with an impressive racing pedigree. This is not a beginners knife nor is it an entry level knife, it is designed to perform at the highest levels of Blade Sports competition.
It's made of Uddeholm Vanadis 4 Extra SuperClean at HRC 63+ with an optimized heat treat similar in nature to the Delta protocol used for our Delta 3V. This material with this heat treat protocol delivers what I feel is the finest steel available for this application anywhere. I think it will outperform anything out there in this application and has dethroned CPM M4 as the king of steels with more world championships in recent history than any other steel.
Competitors are judged not only on their time and accuracy of cuts, points are deducted for damage to the knife. This steel with this heat treat resists bent bevels and chipped or rolled edge at thinner sections than other options allowing a thinner sharper knife which gives you a competitive advantage.
The grip is a little strange looking at first but makes sense once you're familiar with it. It is not a new or experimental design, it's based closely on a grip with three world championships on it that has proven to work well for a lot of different people with different hands.
The shallow S bevel geometry, edge angle and thickness are all based on proven geometry with many wins.
These knives will arrive fiendishly sharp and ready to race. They can be returned to be resharpened to race ready for a reasonable cost.”
Last edited:
