ANikolov
Instagram: https://instagram.com/atanasnikolovkniv
Gold Member
Knifemaker / Craftsman / Service Provider
- Joined
- Jun 3, 2023
- Messages
- 138
Hello my fellow knife buddies!
Today I will present to your attention one classy knife.
Apparently my pictures are too big and can't upload all of them directly here, so here is a link to the full album: https://files.fm/u/nw3qda29rk
And a little info about the knife.
The blade was forged by Rostyslav Dozlo from CPM S125V with 95H18 cladding.
The center of the blade has a hardness of ~65HRC
The construction is stick tang with hidden nut all the way thru the handle.
I've used Arizona Ironwood, Mammoth molar, G10 and Inox for the handle.
It is very thin behind the edge 0.2mm or 0.007874"
The sheath is made from 0.139" thick calf leather.
OAL is 10.2" and the blade is measured at 4.72"
I am asking 650$ for it shipped to your door!
Today I will present to your attention one classy knife.
Apparently my pictures are too big and can't upload all of them directly here, so here is a link to the full album: https://files.fm/u/nw3qda29rk
And a little info about the knife.
The blade was forged by Rostyslav Dozlo from CPM S125V with 95H18 cladding.
The center of the blade has a hardness of ~65HRC
The construction is stick tang with hidden nut all the way thru the handle.
I've used Arizona Ironwood, Mammoth molar, G10 and Inox for the handle.
It is very thin behind the edge 0.2mm or 0.007874"
The sheath is made from 0.139" thick calf leather.
OAL is 10.2" and the blade is measured at 4.72"
I am asking 650$ for it shipped to your door!
