CRK large 21 with micarta and tanto blade (TNK exculsive)
LNIB condition as smooth as hell. 15$ off original price and save 25$ on shipping (everyone who has ordered from Neil knows that shipping is fast but expensive)
Asking sold/B]
CRK Mnandi with Cocobolo Inlays
Recently purchased from knives ship free. The grain is considered premier for this wood and had a higher price tag than they normally do. I can see why, this grain has hues of red, brown, and orange are very prominent = stunning. LNIB carried once to a wedding and it would stay with me if I didn't find my grail mnandi recently! *Everything included. Asking $340
Zero Tolerance 560 CBCF in s110v
Never used, never carried only examine and determined it is just to heavy for me to carry. Even if it has s110v steel. Low serial number at # 0261. LNIB with early lockup. Just a little to big for me.
Asking $sold or BO
Leatherman surge
King of the leatherman in excellent condition:
Key Tech Specs:
100-percent stainless steel construction
Includes Phillips #1-2, screwdriver 3/16-inch bits
Includes Phillips and flat tip eyeglasses bits
4-1/2 inches long (closed)
User Features
The Surge features four blades that can be opened while the tool is closed. Open the straight and serrated knife blades with one hand by placing your thumb at the base of the blade and rotating the knife until it's fully extended, which securely engages the locking mechanism. The locking mechanism is marked with a padlock symbol on the tool, and to disengage it, just squeeze it towards the handle until the blade slides past the lock. It's a simple feature, but it's one that guarantees your safety.
To open and close the interior blades, just grip the handles and swing them open. Each interior blade can be lifted out by using the nail nicks or the thumb lifts. And if you wish to change blades, simply remove the saw or blade file from the blade exchanger by opening the exchanger to a 90-degree angle from the closed handles. The blade releases from a t-shank connector at the clasp. Changing tool bits is equally easy. Just open the bit driver, grasp the tool bit, and pull it straight out -- then snap the desired bit into place.
The Surge is a multitool powerhouse with tough new pliers, longer blades, and easy-to-use locks.
Multitool Capabilities:
All-locking blades
Needlenose pliers
Regular pliers
Wire cutters
Hard-wire cutters
Stranded-wire cutters
Electrical crimper
Clip-point knife
Serrated knife
Scissors
Blade exchanger
Diamond file blade
Wood file blade
Saw blade
Large bit driver
Small bit driver
5/16-inch screwdriver
Awl with thread loop
Ruler (9 inches/22 cm)
Bottle/can opener
Wire stripper
Lanyard ring
Two double-ended bits
Asking sold
No Trades!!
First "I take it" has the first swing or confirmed deal by email
24 hrs of no response voids all offers and "I'll take it" or email deals
I ask you to also email me or PM me when you posted “I will take it” to make sure I saw your interest and can get the deal done faster
I will not insure unless indicated by buyer, but I will track the packages
I will take papal +3.2% or gift option
Shipping is free unless otherwise stated and it gets you USPS + confirmation
Upon purchase you have agreed to abide by your local laws and regulations
Sales are final you post I'll take it you bought it no returns unless grossly misrepresented. Used knives are sold as is. Specific questions are welcomed and encouraged.
Photos are the best judge or condition extra pictures will be taken upon request
No international sales, or sales to NYC
I reserve the right to sell to anyone I please or not and as far as who it goes to I use my fairest judgment and my word is final, but it should not get to that!
LNIB condition as smooth as hell. 15$ off original price and save 25$ on shipping (everyone who has ordered from Neil knows that shipping is fast but expensive)
Asking sold/B]
CRK Mnandi with Cocobolo Inlays
Recently purchased from knives ship free. The grain is considered premier for this wood and had a higher price tag than they normally do. I can see why, this grain has hues of red, brown, and orange are very prominent = stunning. LNIB carried once to a wedding and it would stay with me if I didn't find my grail mnandi recently! *Everything included. Asking $340
Zero Tolerance 560 CBCF in s110v
Never used, never carried only examine and determined it is just to heavy for me to carry. Even if it has s110v steel. Low serial number at # 0261. LNIB with early lockup. Just a little to big for me.
Asking $sold or BO
Leatherman surge
King of the leatherman in excellent condition:
Key Tech Specs:
100-percent stainless steel construction
Includes Phillips #1-2, screwdriver 3/16-inch bits
Includes Phillips and flat tip eyeglasses bits
4-1/2 inches long (closed)
User Features
The Surge features four blades that can be opened while the tool is closed. Open the straight and serrated knife blades with one hand by placing your thumb at the base of the blade and rotating the knife until it's fully extended, which securely engages the locking mechanism. The locking mechanism is marked with a padlock symbol on the tool, and to disengage it, just squeeze it towards the handle until the blade slides past the lock. It's a simple feature, but it's one that guarantees your safety.
To open and close the interior blades, just grip the handles and swing them open. Each interior blade can be lifted out by using the nail nicks or the thumb lifts. And if you wish to change blades, simply remove the saw or blade file from the blade exchanger by opening the exchanger to a 90-degree angle from the closed handles. The blade releases from a t-shank connector at the clasp. Changing tool bits is equally easy. Just open the bit driver, grasp the tool bit, and pull it straight out -- then snap the desired bit into place.
The Surge is a multitool powerhouse with tough new pliers, longer blades, and easy-to-use locks.
Multitool Capabilities:
All-locking blades
Needlenose pliers
Regular pliers
Wire cutters
Hard-wire cutters
Stranded-wire cutters
Electrical crimper
Clip-point knife
Serrated knife
Scissors
Blade exchanger
Diamond file blade
Wood file blade
Saw blade
Large bit driver
Small bit driver
5/16-inch screwdriver
Awl with thread loop
Ruler (9 inches/22 cm)
Bottle/can opener
Wire stripper
Lanyard ring
Two double-ended bits
Asking sold
No Trades!!
First "I take it" has the first swing or confirmed deal by email
24 hrs of no response voids all offers and "I'll take it" or email deals
I ask you to also email me or PM me when you posted “I will take it” to make sure I saw your interest and can get the deal done faster
I will not insure unless indicated by buyer, but I will track the packages
I will take papal +3.2% or gift option
Shipping is free unless otherwise stated and it gets you USPS + confirmation
Upon purchase you have agreed to abide by your local laws and regulations
Sales are final you post I'll take it you bought it no returns unless grossly misrepresented. Used knives are sold as is. Specific questions are welcomed and encouraged.
Photos are the best judge or condition extra pictures will be taken upon request
No international sales, or sales to NYC
I reserve the right to sell to anyone I please or not and as far as who it goes to I use my fairest judgment and my word is final, but it should not get to that!
Last edited:
