Curtiss 3.5" wharny F3 blasted blade and custom CF scale

Feedback: +27 / =0 / -0
Joined
Dec 1, 2013
Messages
299
Carried, sharpened and used.

Blasting and scale was not done by David Curtiss.

CPM154 blade has been glass bead blasted (little wear / pictured)
Loose bearings
2x2 carbon fiber scale by Keyman (no original scale)
gear backspacer
Centered
50% lockup and hasn't moved or been sticky since day 1
23 DPS Wicked Edge


I purchased this from BladeCo about 18 months ago. The blade was blackwashed and that quickly wore off and looked awful. I sent the blade out to be blasted and the rest out for the custom scale.

Carries incredibly well and stays sharp. I reprofiled the edge once before blasting, and once after. Maintained with ceramic and a strop.

These photos are right out of my case and the blade has not been cleaned or wiped down with anything other than my fingers.

SOLD$575 and I will pay PayPal fees and express shipping via USPS (contUS). International + shipping.
First posted "I'll take it" gets it.

407ED918-0AC4-4569-A5F9-513ACF225170_zpsmtfi4mwt.jpg
5E1D8CD0-D474-4497-B90E-B8AF23B7A535_zpsxilcft9m.jpg
DD8E1679-1EB7-468A-B474-394BA539DE3F_zpsbdcry35p.jpg
D7EDCE7A-4DC7-490E-A568-1B515A972206_zps9uyvvm4x.jpg
6C1DA70B-C055-4096-952A-E7357847CC51_zpsqqbsmhjc.jpg
0D1A6885-4171-43B6-BFFD-90BA17EF2EB9_zps9vgnwmxi.jpg
19975686-F79D-4FCA-9702-D2F4D3A70E19_zpsjup6zfia.jpg
1D6873AB-726F-4D32-9B78-62AC43037D67_zpswxax7ock.jpg
 
Last edited:
Back
Top