- Joined
- May 3, 2002
- Messages
- 6,192
TRADE PENDING
Clipless knives aren't for me I guess.
This is a nice custom totally-handmade slipjoint by a maker named BALD from Australia. I've only carried it loose in the bottom of my suit pants to the office and only cut a few paper products with it.
Over-all length of knife:
6 1/8th inches
Blade:
Warncliffe shape
satin finish
2 3/8th inches from front of bolster
Has a tiny bit of blade wobble when held half-open but
when locked open there is nearly none.
Opens and closes with a pleasent "thunk" that sounds like quality
instead of the "snap" you hear with production lockbacks.
Handle:
Brown micarta - not as red as they appear in the photos - they're more brown than red
Left side perfect
Right side has 3 or 4 shallow scratches that are 1/8" long and are barely noticible
Liners:
Polished bronze or brass
Have the slightest rub marks if your really picky
Back:
Lockback is polished steel
Has a very few slight scratches if you're really picky
Back of blade is perfect
Spring is strong
Bolster:
Nickel silver
Bolsters have scuffs and scratches - I'd say 30% scuffed up
Comes with certificate from maker, but no sheath or box or anything.
Looking for:
Chris Reeve knives
Eddie Baca customs
Balisongs
Autos
Need a part-serrated LUDT (+ cash)
Need a Microtech Halo
Buck General (+ lots of cash)
Victorinox Cyber tool (+ lots of cash)
Spyderco Large and small Manix part-serrated (+ cash)
DJ Urbeneski Knives (American Kami)
Spyderco Lum Tanto Folders
Cigars
Will consider any trade.
Would trade straight-across for a Small Regular Sebenza
[Please be aware that my employer has a strict internet policy so I cannot reply to anything until I get home in the evenings.]
.
Clipless knives aren't for me I guess.
This is a nice custom totally-handmade slipjoint by a maker named BALD from Australia. I've only carried it loose in the bottom of my suit pants to the office and only cut a few paper products with it.
Over-all length of knife:
6 1/8th inches
Blade:
Warncliffe shape
satin finish
2 3/8th inches from front of bolster
Has a tiny bit of blade wobble when held half-open but
when locked open there is nearly none.
Opens and closes with a pleasent "thunk" that sounds like quality
instead of the "snap" you hear with production lockbacks.
Handle:
Brown micarta - not as red as they appear in the photos - they're more brown than red
Left side perfect
Right side has 3 or 4 shallow scratches that are 1/8" long and are barely noticible
Liners:
Polished bronze or brass
Have the slightest rub marks if your really picky
Back:
Lockback is polished steel
Has a very few slight scratches if you're really picky
Back of blade is perfect
Spring is strong
Bolster:
Nickel silver
Bolsters have scuffs and scratches - I'd say 30% scuffed up
Comes with certificate from maker, but no sheath or box or anything.
Looking for:
Chris Reeve knives
Eddie Baca customs
Balisongs
Autos
Need a part-serrated LUDT (+ cash)
Need a Microtech Halo
Buck General (+ lots of cash)
Victorinox Cyber tool (+ lots of cash)
Spyderco Large and small Manix part-serrated (+ cash)
DJ Urbeneski Knives (American Kami)
Spyderco Lum Tanto Folders
Cigars
Will consider any trade.
Would trade straight-across for a Small Regular Sebenza
[Please be aware that my employer has a strict internet policy so I cannot reply to anything until I get home in the evenings.]
.
