Need to exchange some steel for cash, so here are some custom knives to move on. All are unused, in original condition. All are below original cost, some at a very large discount.
Prices are net to me including shipping to the US i.e. you cover PP fees or send PP gift. First to post Ill take it, gets it. Follow up with an email for payment details.
Bradshaw Blades 4 W2 pocket bowie with hamon and carbon fiber handle - $225. Link to original sale thread is below -
http://www.bladeforums.com/forums/s...carbon-fiber!?highlight=bradshaw+pocket+bowie
Fiddleback Shiv, Tuxedo Configuration, tapered tang, 1/8 O2 steel, leather belt / IWB sheath which fits it like a glove. Very handy EDC with defensive capabilities. $240
Lon Humphries Brute de Forge - 5" 1084 blade and curly maple handle with black liners, forge finish on flats and polished spine - $150 SOLD
This is a very robust knife, almost 0.25" at the spine, but tapered, and high ground for a sharp slicing edge and very nice balance. There is a hamon, but too subtle to show in the photo. Sheath has some wax applied, which is the white on the surface.
Dan Graves large harpoon bowie, stag handle. This is in Dan's new "snakeskin" damascus, made from 52100 ball-bearings for great strength and edge retention. This is the first knife he made with the larger ball bearings. $325
Link to original sales thread: http://www.bladeforums.com/forums/s...h-quot-SOLD-quot?highlight=snakeskin+damascus
Bob Armstrong double-edged 52100 fighter. 6" blade, black leather sheath. Steel is roughly 0.21" thick, but tang is tapered for great balance (one first pin). $200
Wolf Creek Forge 5160 chopper with rosewood handle (10" blade, 15" overall) & Xander Knives D2 slicer. There is no sheath with the Wolf Creek and some very slight shrinkage of the handle scales on the small blade. Offering these as a package for only $200 SOLD
Large Big Chris bowie in 0.2" 1084, cherry handle scales with green liner, tapered tang. 11" blade and 16+" overall. There is a slight crack between the handle scales and the tang that I tried to show with the second picture, but the handles are totally secure, and I'm sure Chris would see you right if there ever were any problem. $150
Finally two custom damascus folders. Both of these are catch and release - both very nice knives, but I was going to display them rather than use, and they would probably be better served in someone else's hands.
Milan Mozolic large damascus liner lock with redwood burl and aged bronze handle, titanium liners - $300
Scales: Stabilized redwood burl and patinated bronze
Blade: W5 and L6 steel. Flat grind.
Liners: Titanium 6AL4V
Center pivot 6mm/0,236" stainless steel. Stop pin 3mm/0,118" stainless steel.
Teflon washers.
Full length: 224mm/8,819"
Blade: 96mm/3,78"
Closed: 129mm/5,079"
Szilard large (95mm blade) damascus and antler friction folder - $150
Prices are net to me including shipping to the US i.e. you cover PP fees or send PP gift. First to post Ill take it, gets it. Follow up with an email for payment details.
Bradshaw Blades 4 W2 pocket bowie with hamon and carbon fiber handle - $225. Link to original sale thread is below -
http://www.bladeforums.com/forums/s...carbon-fiber!?highlight=bradshaw+pocket+bowie
Fiddleback Shiv, Tuxedo Configuration, tapered tang, 1/8 O2 steel, leather belt / IWB sheath which fits it like a glove. Very handy EDC with defensive capabilities. $240
Lon Humphries Brute de Forge - 5" 1084 blade and curly maple handle with black liners, forge finish on flats and polished spine - $150 SOLD
This is a very robust knife, almost 0.25" at the spine, but tapered, and high ground for a sharp slicing edge and very nice balance. There is a hamon, but too subtle to show in the photo. Sheath has some wax applied, which is the white on the surface.
Dan Graves large harpoon bowie, stag handle. This is in Dan's new "snakeskin" damascus, made from 52100 ball-bearings for great strength and edge retention. This is the first knife he made with the larger ball bearings. $325
Link to original sales thread: http://www.bladeforums.com/forums/s...h-quot-SOLD-quot?highlight=snakeskin+damascus
Bob Armstrong double-edged 52100 fighter. 6" blade, black leather sheath. Steel is roughly 0.21" thick, but tang is tapered for great balance (one first pin). $200
Wolf Creek Forge 5160 chopper with rosewood handle (10" blade, 15" overall) & Xander Knives D2 slicer. There is no sheath with the Wolf Creek and some very slight shrinkage of the handle scales on the small blade. Offering these as a package for only $200 SOLD
Large Big Chris bowie in 0.2" 1084, cherry handle scales with green liner, tapered tang. 11" blade and 16+" overall. There is a slight crack between the handle scales and the tang that I tried to show with the second picture, but the handles are totally secure, and I'm sure Chris would see you right if there ever were any problem. $150
Finally two custom damascus folders. Both of these are catch and release - both very nice knives, but I was going to display them rather than use, and they would probably be better served in someone else's hands.
Milan Mozolic large damascus liner lock with redwood burl and aged bronze handle, titanium liners - $300
Scales: Stabilized redwood burl and patinated bronze
Blade: W5 and L6 steel. Flat grind.
Liners: Titanium 6AL4V
Center pivot 6mm/0,236" stainless steel. Stop pin 3mm/0,118" stainless steel.
Teflon washers.
Full length: 224mm/8,819"
Blade: 96mm/3,78"
Closed: 129mm/5,079"
Szilard large (95mm blade) damascus and antler friction folder - $150
Last edited:
