Custom bushcraft Khukri, Custom Puuko.

adinb114

adinb114

Feedback: +22 / =0 / -0
Joined
Feb 25, 2011
Messages
651
Hi All,


Here Is A small 5160 Bushcraft Khukri. Jim Bensinger did this one. Triple quenched about .45" at the thickest point, full distal taper. Red micarta and brass rivets. Includes excellent Kydex and tek lock.
This is used, but has been buffed since last use, some patina is visible, this is shown in the picture. This one was a prototype and the handle is a little rough, there are some gaps and uneven finish, nothing that affects performance, this is a user, not a safe queen. Hollow ground. This thing is heavy and chops like a hatchet. I'm selling to fund another knife from Jim.

Blade is 8" (7.5" cutting edge)
Handle is 4.25"







$169 Shipped OBRO, Not bad for a custom forged Khukri.

Finally I have a small Bushcraft Puuko.

This one is also made by Jim. Triple quenched 1095, scandi grind, stacked leather handle, aluminum pommel. Kydex sheath. Some use, Very small chip in center of blade, perhaps 1/64" deep, hard to even see, doesn't affect cutting performance. Etched so you can see the temper line. This is a small and light Bushcrafter, up to whatever you'd have it do.

3.5" blade (3.25" cutting edge)

7.25" overall.



Close up of the harden lines.



$sold shipped. OBRO

.

The only trades i'm looking for are big High carbon choppers:
Junglas
SYKCO 911
Buck hoodlum maybe.

Email me with questions or if you wan't more pics.

First Ill take it gets it.

Paypal only please.


Cheers,
Adin
 
Last edited:
Hi All,


Here Is A small 5160 Bushcraft Khukri. Jim Bensinger did this one. Triple quenched about .45" at the thickest point, full distal taper. Red micarta and brass rivets. Includes excellent Kydex and tek lock.
This is used, but has been buffed since last use, some patina is visible, this is shown in the picture. This one was a prototype and the handle is a little rough, there are some gaps and uneven finish, nothing that affects performance, this is a user, not a safe queen. Hollow ground. This thing is heavy and chops like a hatchet. I'm selling to fund another knife from Jim.

Blade is 8" (7.5" cutting edge)
Handle is 4.25"







$149 Shipped OBRO, Not bad for a custom forged Khukri.

The smaller knife pictured is 52100, triple quenched and zero ground. Beautiful black textured micarta, rounded spine, full distal taper. It balances perfectly on the finger groove, handles very well. This is up to whatever chores you put to it. Great edc too, I carry it often. Is most definitely used, some light scratches, no other signs of wear or damage. I recently etched it in ferric chloride so ten blade is darker now and shows the hardening and quench lines. I will include pictures of the result as soon as my photobucket app ceases to fail. I can send them to those interested. Includes excellent kydex.

3.5" blade
3.75" handle
3/16" at the thickest point.

I'm not at all keen to let this one go.

$110 shipped.

$225 shipped together.

Not particularly interested in trades beyond other high quality used fixed blades.

Email me with questions or if you wan't more pics.

Adinb114atgmail.com
First Ill take it gets it.


Paypal only please.


Cheers,
Adin
 
Hi All,


Here Is A small 5160 Bushcraft Khukri. Jim Bensinger did this one. Triple quenched about .45" at the thickest point, full distal taper. Red micarta and brass rivets. Includes excellent Kydex and tek lock.
This is used, but has been buffed since last use, some patina is visible, this is shown in the picture. This one was a prototype and the handle is a little rough, there are some gaps and uneven finish, nothing that affects performance, this is a user, not a safe queen. Hollow ground. This thing is heavy and chops like a hatchet. I'm selling to fund another knife from Jim.

Blade is 8" (7.5" cutting edge)
Handle is 4.25"







$149 Shipped OBRO, Not bad for a custom forged Khukri.

The smaller knife pictured is 52100, triple quenched and zero ground. Beautiful black textured micarta, rounded spine, full distal taper. It balances perfectly on the finger groove, handles very well. This is up to whatever chores you put to it. Great edc too, I carry it often. It's most definitely used, some light scratches, no other signs of wear or damage. I recently etched it in ferric chloride so the blade is darker now and shows the hardening and quench lines. I will include pictures of the result as soon as my photobucket app ceases to fail. I can send them to those interested. Includes excellent kydex.

3.5" blade
3.75" handle
3/16" at the thickest point.

I'm not at all keen to let this one go.

$110 shipped.

$225 shipped together.

Not particularly interested in trades beyond other high quality used fixed blades.

Email me with questions or if you wan't more pics.

Adinb114atgmail.com
First I'll take it gets it.


Paypal only please.


Cheers,
Adin
 
You must log in or register to reply here.
Back
Top