Need to thin the ever-growing herd, so here are some custom knives to move on. All are unused, in original condition. All are below original cost, some at a very large discount.
Prices are net to me including shipping to the US – i.e. you cover PP fees or send PP gift. First to post I’ll take it, gets it. Follow up with an email for payment details.
Willing to offer some discounts for multiple purchases.
Please also see my sales threads for production fixed blades here – http://www.bladeforums.com/forums/s...nives-GSO-5-amp-more!?p=14008728#post14008728
And production folders here – http://www.bladeforums.com/forums/s...enchmade-M390-Barrage?p=14008589#post14008589
Huge Chris Cody knife in 0.2" CPM 3V steel - $275 (I paid over $400). This is blade heavy and a dedicated chopper. Blade is 14" long, and you can see in the comparison shot at the bottom that this is larger than a Busse Killa Zilla or Scrapyard 1311. The handle is brown canvas micarta with a black paper micarta bolster. There is no sheath. [Note that the smaller blade pictured alongside has already been sold separately - only the chopper being sold here.]
Bradshaw Blades 4” W2 pocket bowie with hamon and carbon fiber handle - $240. Link to original sale thread is below -
http://www.bladeforums.com/forums/s...n-and-carbon-fiber!?highlight=pocket+bowie+w2
Mark Condos fighter, D2 blade of 3/16" stock with robust convexed edge, beautiful ironwood burl handle, brass and mosaic pins, soldered brass guard, tooled sheath by knife maker - $275
Cutting edge length is just a touch over 6", total length is 11.5", balances very nicely on the first finger. My photos don't do this knife justice and I won't be too sad if it doesn't sell. There is a little protectant on the blade, which is why it doesn't look clean.
Lon Humphries Brute de Forge - 5" 1084 blade and curly maple handle with black liners, forge finish on flats and polished spine - $175
This is a very robust knife, almost 0.25" at the spine, but tapered, and high ground for a sharp slicing edge and very nice balance. There is a hamon, but too subtle to show in the photo. Sheath has some wax applied, which is the white on the surface.
Finally two custom damascus folders. Both of these are catch and release - both very nice knives, but I was going to display them rather than use, and they would probably be better served in someone else's hands.
Milan Mozolic large damascus liner lock with redwood burl and aged bronze handle, titanium liners - $330
Scales: Stabilized redwood burl and patinated bronze
Blade: W5 and L6 steel. Flat grind.
Liners: Titanium 6AL4V
Center pivot 6mm/0,236" stainless steel. Stop pin 3mm/0,118" stainless steel.
Teflon washers.
Full length: 224mm/8,819"
Blade: 96mm/3,78"
Closed: 129mm/5,079"
Szilard large (95mm blade) damascus and antler friction folder - $165
Prices are net to me including shipping to the US – i.e. you cover PP fees or send PP gift. First to post I’ll take it, gets it. Follow up with an email for payment details.
Willing to offer some discounts for multiple purchases.
Please also see my sales threads for production fixed blades here – http://www.bladeforums.com/forums/s...nives-GSO-5-amp-more!?p=14008728#post14008728
And production folders here – http://www.bladeforums.com/forums/s...enchmade-M390-Barrage?p=14008589#post14008589
Huge Chris Cody knife in 0.2" CPM 3V steel - $275 (I paid over $400). This is blade heavy and a dedicated chopper. Blade is 14" long, and you can see in the comparison shot at the bottom that this is larger than a Busse Killa Zilla or Scrapyard 1311. The handle is brown canvas micarta with a black paper micarta bolster. There is no sheath. [Note that the smaller blade pictured alongside has already been sold separately - only the chopper being sold here.]
Bradshaw Blades 4” W2 pocket bowie with hamon and carbon fiber handle - $240. Link to original sale thread is below -
http://www.bladeforums.com/forums/s...n-and-carbon-fiber!?highlight=pocket+bowie+w2
Mark Condos fighter, D2 blade of 3/16" stock with robust convexed edge, beautiful ironwood burl handle, brass and mosaic pins, soldered brass guard, tooled sheath by knife maker - $275
Cutting edge length is just a touch over 6", total length is 11.5", balances very nicely on the first finger. My photos don't do this knife justice and I won't be too sad if it doesn't sell. There is a little protectant on the blade, which is why it doesn't look clean.
Lon Humphries Brute de Forge - 5" 1084 blade and curly maple handle with black liners, forge finish on flats and polished spine - $175
This is a very robust knife, almost 0.25" at the spine, but tapered, and high ground for a sharp slicing edge and very nice balance. There is a hamon, but too subtle to show in the photo. Sheath has some wax applied, which is the white on the surface.
Finally two custom damascus folders. Both of these are catch and release - both very nice knives, but I was going to display them rather than use, and they would probably be better served in someone else's hands.
Milan Mozolic large damascus liner lock with redwood burl and aged bronze handle, titanium liners - $330
Scales: Stabilized redwood burl and patinated bronze
Blade: W5 and L6 steel. Flat grind.
Liners: Titanium 6AL4V
Center pivot 6mm/0,236" stainless steel. Stop pin 3mm/0,118" stainless steel.
Teflon washers.
Full length: 224mm/8,819"
Blade: 96mm/3,78"
Closed: 129mm/5,079"
Szilard large (95mm blade) damascus and antler friction folder - $165
Last edited:
