Back Wiseman Pocket in Black G10 - 4 3/4" closed - 8 1/4" overall - 1/8 blade stock - 1095 high carbon steel - 2 with black G10 - Stainless steel milled,recessed liners. Good walk and talk with half stops - Medium blade pull - Not a nail breaker but nice and solid. Price is $175
ONeill Bird & Trout ATS 34 SS blade, heat treated to RC 59 w/cryogenic freeze, flat ground hand sanded satin finish, red linen micarta handle with 303 SS pins - includes leather sheath. Price is $75
ONeill Tanto ground from 3/16th O-1 tool steel . Heat treat by Peter's , Rc 59-60 - flat ground and satin finished .
Overall length is 8-1/4" - Blade is 3-3/4" tip to handle - Sharpened edge is 3-1/2" width is 7/8" at Ricasso - Pins are S.S. tube , copper tube , and brass rod -
Handle is Natural linen Micarta - Price is SOLD
Burton Cutlery 8" Hunter - 1080 Forged Blade w/End Cut Ambrosia Maple Handle and Brass Pins. Includes handmade leather sheath w/lizard skin inlay. Comes with Certificate of Authenticity from Burton - Beautiful handmade knife and sheath !!! Price $150
Brous Blades Silent Soldier - original model - Blade Length is 2 Inches, overall is 4 inches, cutting edge height is about a 1/2 inch - with a handmade Kydex sheath. Price is $75
Henry Cambron Necker - 1084 Carbon Steel Acid Etched Blade w/flat grind - razor sharp - custom filework - Figured Maple Handle w/brass pins - Leather sheath w/rare earth magnet can be worn around neck or on belt. Comes with Certificate of Origin from Maker. Very cool knife !!! Price - $75
MIKE SNODY Custom Menaces
Snody Stainless Damascus Menace Mike Norris Stainless Damascus One Hornets Nest and One Gator Skin - 3.5" Blade Length, 7" Overall Length, Double Hollow Grind, Double Swege, Nice Satin Finish, Pro Heat Treat and Cryo, Aerospace Carbon Fiber // World Class Quality, Stainless Steel Blind Bolt Fasteners. SNODY on the spine of the handle. NOTE THESE WERE HADE MADE BY MIKE IN HIS TEXAS SHOP - Price $400 EACH
REASONABLE OFFER WILL BE CONSIDERED BUT PLEASE NO LOWBALLS !!!!
ALL Prices include PayPal fees, shipping (CONUS ONLY) - NO TRADES PLEASE!!! PM me or email me at barzo@cox.net - first "I'll take it" in this thread will get the knife - THANKS !!!
I reserve the right to refuse to sell to anybody based on anything.
ONeill Bird & Trout ATS 34 SS blade, heat treated to RC 59 w/cryogenic freeze, flat ground hand sanded satin finish, red linen micarta handle with 303 SS pins - includes leather sheath. Price is $75
ONeill Tanto ground from 3/16th O-1 tool steel . Heat treat by Peter's , Rc 59-60 - flat ground and satin finished .
Overall length is 8-1/4" - Blade is 3-3/4" tip to handle - Sharpened edge is 3-1/2" width is 7/8" at Ricasso - Pins are S.S. tube , copper tube , and brass rod -
Handle is Natural linen Micarta - Price is SOLD
Burton Cutlery 8" Hunter - 1080 Forged Blade w/End Cut Ambrosia Maple Handle and Brass Pins. Includes handmade leather sheath w/lizard skin inlay. Comes with Certificate of Authenticity from Burton - Beautiful handmade knife and sheath !!! Price $150
Brous Blades Silent Soldier - original model - Blade Length is 2 Inches, overall is 4 inches, cutting edge height is about a 1/2 inch - with a handmade Kydex sheath. Price is $75
Henry Cambron Necker - 1084 Carbon Steel Acid Etched Blade w/flat grind - razor sharp - custom filework - Figured Maple Handle w/brass pins - Leather sheath w/rare earth magnet can be worn around neck or on belt. Comes with Certificate of Origin from Maker. Very cool knife !!! Price - $75
MIKE SNODY Custom Menaces
Snody Stainless Damascus Menace Mike Norris Stainless Damascus One Hornets Nest and One Gator Skin - 3.5" Blade Length, 7" Overall Length, Double Hollow Grind, Double Swege, Nice Satin Finish, Pro Heat Treat and Cryo, Aerospace Carbon Fiber // World Class Quality, Stainless Steel Blind Bolt Fasteners. SNODY on the spine of the handle. NOTE THESE WERE HADE MADE BY MIKE IN HIS TEXAS SHOP - Price $400 EACH
REASONABLE OFFER WILL BE CONSIDERED BUT PLEASE NO LOWBALLS !!!!
ALL Prices include PayPal fees, shipping (CONUS ONLY) - NO TRADES PLEASE!!! PM me or email me at barzo@cox.net - first "I'll take it" in this thread will get the knife - THANKS !!!
I reserve the right to refuse to sell to anybody based on anything.
Attachments
Last edited:
