Hey Guys, I'm currently looking for a maker to make a knife that I've designed recently.
The knife is a slipjoint folder, attached are some pictures with various blade styles (because I'm not entirely sure which one to go with yet). I also attached a drawing with basic dimensions and mechanism. Materialwise I'd go with some toolsteel at fairly high hardness for the blade (e.g. M4) and for the scales I'd love to see something like koa.
Pull and plunge will probably change a bit (to either grindable sweeping plunge or straight plunge and a trapezoidal pull).
In case anyone wants to look at it in 3D he can do so here: https://a360.co/2lZsCuB
pdf with dimensions etc.: https://drive.google.com/open?id=0Bz-GFBWAQlgPbkJvekE5M0V5WFVROGZ2VmRKSnp6dl9SUjVB
Pictures:
You can contact me either at volzstefan97@googlemail.com or simply in this thread.
Prefered location would be Europe
The knife is a slipjoint folder, attached are some pictures with various blade styles (because I'm not entirely sure which one to go with yet). I also attached a drawing with basic dimensions and mechanism. Materialwise I'd go with some toolsteel at fairly high hardness for the blade (e.g. M4) and for the scales I'd love to see something like koa.
Pull and plunge will probably change a bit (to either grindable sweeping plunge or straight plunge and a trapezoidal pull).
In case anyone wants to look at it in 3D he can do so here: https://a360.co/2lZsCuB
pdf with dimensions etc.: https://drive.google.com/open?id=0Bz-GFBWAQlgPbkJvekE5M0V5WFVROGZ2VmRKSnp6dl9SUjVB
Pictures:
You can contact me either at volzstefan97@googlemail.com or simply in this thread.
Prefered location would be Europe