- Joined
- Jul 6, 2006
- Messages
- 88
Hello all, been a while. Long story short i have a few teeth to replace and need to sell some things. First up this NIB awesome Gen 3 XM-18. Just got this 3 weeks ago from good buddy Duane from EDC. Dealer price is between $1,000 and $1,100. I need $SPF$ Paypal or $SPF$ Money order/Cashiers check. CONUS on this due to value. Although i might ship oversees but would have to declare full amount and would need more $$$.
I thank you and it is good to be back:thumbup:
Here are the specs from Duane's site:
Rick Hinderer's Custom Ground XM-18.
Spearpoint Blade, Satin Finish.
This is not just another G-10 Side/Ti Side folder, this one has a Full Liner on the G-10 side, to add strength and rigidity as well as give the blade stop something other than the handle material to slam into.
Rick has also designed a new pivot and monster standoffs for this model.
The pivot is a 1/4 in shaft with 3/8 heads of 440c with a 8/32 screw that is threaded through the entire pivot.
Monster standoffs (3) are 3/8 diameter with a 3/16 shaft going through them and then into the opposite side, and then screwed in with 6/32 screws.
Of course the "Hinderer Lock bar Stabilizer" is installed, and has the tip up tip down carry option.
The blade on these are .165” Duratech 20CV .
3-1/2” x .165 Duratech 20CV Blade.
8-1/4” OAL
5.4 oz.
Comes with Original Hinderer White Box, stamped "XM-18" and "Custom Grind."
I thank you and it is good to be back:thumbup:
Here are the specs from Duane's site:
Rick Hinderer's Custom Ground XM-18.
Spearpoint Blade, Satin Finish.
This is not just another G-10 Side/Ti Side folder, this one has a Full Liner on the G-10 side, to add strength and rigidity as well as give the blade stop something other than the handle material to slam into.
Rick has also designed a new pivot and monster standoffs for this model.
The pivot is a 1/4 in shaft with 3/8 heads of 440c with a 8/32 screw that is threaded through the entire pivot.
Monster standoffs (3) are 3/8 diameter with a 3/16 shaft going through them and then into the opposite side, and then screwed in with 6/32 screws.
Of course the "Hinderer Lock bar Stabilizer" is installed, and has the tip up tip down carry option.
The blade on these are .165” Duratech 20CV .
3-1/2” x .165 Duratech 20CV Blade.
8-1/4” OAL
5.4 oz.
Comes with Original Hinderer White Box, stamped "XM-18" and "Custom Grind."
Last edited: