Introduction:
Hi all! As almost none of you know, my knives are slow in forming. I wish I had more time to devote to this craft! Anywho, six months later; more knives!
I would prefer to only ship in the US, but I would be willing to discuss shipping worldwide. Here on out, when I refer to "shipped", assume CONUS!
My blades do come sharp. I'll do my best to package them safe but, you know... be smart about handling.
Please, if you're going to buy a blade make sure it's legal. If you can't legally own one, it's almost impossible for me to tell. Be honest!
Contact me if you have any questions before buying. After is always fine, but usually catching things before the sale is smartest.
On that note:
Email: farchyld@gmail.com
Paypal: rdklineii@gmail.com
Lastly, a note for the mods: I always want to abide by the rules. Please assume that my intentions are always the best. If something is amiss in my threads, let me know and I will be sure to correct it asap!
-Bobby
Currently: D2 Tanto, Cocobolo handles with hidden pin construction!
----------------------------
For your consideration is my D2 Tanto with smoothed Cocobolo handles, utilizing hidden pin construction! This clocks in at 9 and 1/16" OAL. The cutting edge is 5 and 1/16", and the handle is 3 and 13/16" tall. It is a deep hollow-grind D2 blade with a satin finish on both sides with a bit of a polish on the bevel itself. The handle is about 5/8" thick while the blade is about 1/8" wide at the spine. The construction was a real treat! Thanks to Mr. Fairly, I picked up a new way to construct these without showing the pins. Under the beautiful cocobolo is the D2 tang, which I've ground a channel into. In that channel are two holes, chamfered, containing solid G10 rods. Those rods are recessed into the cocobolo enough to hold it tight, and reinforced by quality epoxy!
I do my best to be honest with myself, my clients, my peers and my mentors. This is my best work to date, and I have learned so much from doing it!
I'd like to get $210$140 for this one shipped, with molded kydex.
In addition, as with all of my blades it will be signed.
(Yeah, the pics are not the best. I don't profess to be a photographer! inquire for cell pics which my end up being better!)
----------------------------
Check the signature for a link to my G+ where you can find all of my current sales as well as shop updates!
Hi all! As almost none of you know, my knives are slow in forming. I wish I had more time to devote to this craft! Anywho, six months later; more knives!
I would prefer to only ship in the US, but I would be willing to discuss shipping worldwide. Here on out, when I refer to "shipped", assume CONUS!
My blades do come sharp. I'll do my best to package them safe but, you know... be smart about handling.
Please, if you're going to buy a blade make sure it's legal. If you can't legally own one, it's almost impossible for me to tell. Be honest!
Contact me if you have any questions before buying. After is always fine, but usually catching things before the sale is smartest.
On that note:
Email: farchyld@gmail.com
Paypal: rdklineii@gmail.com
Lastly, a note for the mods: I always want to abide by the rules. Please assume that my intentions are always the best. If something is amiss in my threads, let me know and I will be sure to correct it asap!
-Bobby
Currently: D2 Tanto, Cocobolo handles with hidden pin construction!
----------------------------
For your consideration is my D2 Tanto with smoothed Cocobolo handles, utilizing hidden pin construction! This clocks in at 9 and 1/16" OAL. The cutting edge is 5 and 1/16", and the handle is 3 and 13/16" tall. It is a deep hollow-grind D2 blade with a satin finish on both sides with a bit of a polish on the bevel itself. The handle is about 5/8" thick while the blade is about 1/8" wide at the spine. The construction was a real treat! Thanks to Mr. Fairly, I picked up a new way to construct these without showing the pins. Under the beautiful cocobolo is the D2 tang, which I've ground a channel into. In that channel are two holes, chamfered, containing solid G10 rods. Those rods are recessed into the cocobolo enough to hold it tight, and reinforced by quality epoxy!
I do my best to be honest with myself, my clients, my peers and my mentors. This is my best work to date, and I have learned so much from doing it!
I'd like to get $210$140 for this one shipped, with molded kydex.
In addition, as with all of my blades it will be signed.
(Yeah, the pics are not the best. I don't profess to be a photographer! inquire for cell pics which my end up being better!)
----------------------------
Check the signature for a link to my G+ where you can find all of my current sales as well as shop updates!