Hello there.
I just registered and figure I'll introduce myself and offer a couple of available knives.
I started making knives in 2014 and have been consumed by it since. I've made somewhere around 50 knives so far. I've come to the point where I think some of the knives are good enough to sell, and it would be nice to get some funds in to keep improving this hobby.
I'm a swedish stock removal knifemaker. I send out for proffessional heat treat in vacuum furnace when applicable and get each blade to tested hardness. I like to work with burl woods and handrub finish. Actually I like to do as much as possible/reasonable by hand.
There is video demos for all but one but I can only link three, check on my youtube channel for the others
Available knives:
Viktor
[video=youtube;pzS-RwiGNmk]https://www.youtube.com/watch?v=pzS-RwiGNmk[/video]
1095 61-62 hrc. Reindeer antler, curly birch, brass pinned tang. Kydex sheath.
120 usd (+15 usd shipping) 80 usd shipped
Stina
[video=youtube;olRXBomUuI0]https://www.youtube.com/watch?v=olRXBomUuI0[/video]
O1 65 hrc. Stabilized box elder, g10 liners, brass pins. Kydex/leather sheath.
120 usd (+15 shipping) SOLD
Helga
[video=youtube;ZEqQKrztaek]https://www.youtube.com/watch?v=ZEqQKrztaek[/video]
1095 61-62 hrc. Reindeer antler, curly birch, brass pinned tang. Kydex sheath.
120 usd (+15 usd shipping) 80 usd shipped
Lars
1095 61-62 hrc. Reindeer antler, curly birch, brass pinned tang. Kydex sheath.
120 usd (+15 usd shipping) 80 usd shipped
Allan
O1 61-62 hrc. Curly birch scales.
120 usd (+15 usd shipping) 80 usd shipped
Alvar
http://imgur.com/V2SkXvG
See video for "Allan"
O1 65 hrc. Canvas micarta. Belt finish, buffed. Kydex neck sheath. 110 usd shipped) 80 usd shipped
Göran
http://imgur.com/cTmFLK1
http://imgur.com/ayWsa8x
1095 65 hrc. Boxwood handle. Pinned stick tang and hard halftanleather sheath.
110 usd shipped) 80 usd shipped
If you want some other carry options for kydex maybe I can help you with nylon webbing for free. I'll include some black paracord with each knife.
Thanks for looking, any questions/opinions welcome!
I just registered and figure I'll introduce myself and offer a couple of available knives.
I started making knives in 2014 and have been consumed by it since. I've made somewhere around 50 knives so far. I've come to the point where I think some of the knives are good enough to sell, and it would be nice to get some funds in to keep improving this hobby.
I'm a swedish stock removal knifemaker. I send out for proffessional heat treat in vacuum furnace when applicable and get each blade to tested hardness. I like to work with burl woods and handrub finish. Actually I like to do as much as possible/reasonable by hand.
There is video demos for all but one but I can only link three, check on my youtube channel for the others
Available knives:
Viktor
[video=youtube;pzS-RwiGNmk]https://www.youtube.com/watch?v=pzS-RwiGNmk[/video]
1095 61-62 hrc. Reindeer antler, curly birch, brass pinned tang. Kydex sheath.
120 usd (+15 usd shipping) 80 usd shipped
Stina
[video=youtube;olRXBomUuI0]https://www.youtube.com/watch?v=olRXBomUuI0[/video]
O1 65 hrc. Stabilized box elder, g10 liners, brass pins. Kydex/leather sheath.
120 usd (+15 shipping) SOLD
Helga
[video=youtube;ZEqQKrztaek]https://www.youtube.com/watch?v=ZEqQKrztaek[/video]
1095 61-62 hrc. Reindeer antler, curly birch, brass pinned tang. Kydex sheath.
120 usd (+15 usd shipping) 80 usd shipped
Lars
1095 61-62 hrc. Reindeer antler, curly birch, brass pinned tang. Kydex sheath.
120 usd (+15 usd shipping) 80 usd shipped
Allan
O1 61-62 hrc. Curly birch scales.
120 usd (+15 usd shipping) 80 usd shipped
Alvar
http://imgur.com/V2SkXvG
See video for "Allan"
O1 65 hrc. Canvas micarta. Belt finish, buffed. Kydex neck sheath. 110 usd shipped) 80 usd shipped
Göran
http://imgur.com/cTmFLK1
http://imgur.com/ayWsa8x
1095 65 hrc. Boxwood handle. Pinned stick tang and hard halftanleather sheath.
110 usd shipped) 80 usd shipped
If you want some other carry options for kydex maybe I can help you with nylon webbing for free. I'll include some black paracord with each knife.
Thanks for looking, any questions/opinions welcome!
Last edited:
