Damascus Billet (11/7 D1)

rainshadow1

Knifemaker / Craftsman / Service Provider
Feedback: +0 / =0 / -0
Joined
Nov 11, 2007
Messages
64
Random Pattern Damascus billet.

Slightly over 12" x at least 1 3/8" x 3/16" tapering to 1/8" at the misshapen end.

Only etched enough to see the pattern you'll find. No Voids, solid. Slight ladder, slight raindrop, 320 layers. 15n20/1080.

$88 delivers in the US. (Quote shipping elsewhere.)

May or may not have profiles drawn on it when you get it, but if I decide to build it, I'll take it off the posting before I grind anything!

D1.jpg
 
High Count / Low Twist Pattern Damascus billet.

Slightly over 9" x 1 1/4" tapering to 3/4" at that one end x 3/16" tapering to 1/8" at the very end of the tapered end.

Only etched enough to see the pattern you'll find. No Voids, solid. 320 layers 15n20/1080, with 4 stripe layers of 5160.

$68 delivers in the US. (Quote shipping elsewhere.)

May or may not have profiles drawn on it when you get it, but if I decide to build it, I'll take it off the posting before I grind anything!

D3.jpg
 
No longer for sale. Going to grind it. Ground its mate and it turned out too good to pass up!
 
Back
Top