DAN FARR - FLEUR DE LIS: $995.00 Firm >>>> THIS ONE IS SPF
Will consider full and partial trades against Ryuchi Kawamura Slip joints, and watches from Breitling, Rolex, Omega, IWC, Sinn, Stowa.
Super rare, totally unique.
With an OAL of 12 1/4 inches and a blade length just short of 7 inches, this is an absolutely exquisite knife by the tremendously talented Dan Farr.
First off the blade construction, forged from 5160, Dan has given this blade a slight recurve and a subtle drop point, the spine is apexed rather than flat or radiused, the final finish is 800 grit hand rubbed . The most striking aspect is the fuller, an unusual incorporation in today's forged blade, this rarity is partly due to the work involved in adding the feature - no milling or power tools here, just plain old elbow grease ,abrasive papers and many many hours. Dan has put a lot of time, effort and consideration into his blade design, edge geometry, handle design, angles, thickness,weight and balance, such that he is able to construct his knives to specific purposes, knives that look very similar in photographs will have very different persona's in the hand. That being said Dan did inform me that this little delicate flower (Fluer de lis!!!) is still able to cut 2 pieces of rope in one go!
The handle on this piece, and the feature that lends it its name, is really exceptional. The multiple finger grooves and swollen back allow your hand to grasp the knife perfectly. The stippling providing just enough grip and friction to maintain confidence in the most challenging environment.
As with all of Dan's knives the finish he puts on this walnut is amongst the best you will see. He put about 7 coats of finish on the wood, sanding in between. It is then coated in mineral oil, sanded with 600grit to remove any dust specs, or imperfections. Next its cleaned and coated with oil again and sprinkled with fine pummice and rubbed until the shine is removed. Finally Dan rubs on a slurry of rotten stone and mineral oil to bring the finish to a satin, it is also a very repairable finish for the users amongst us.
Finally, Dan has worked in the Fleur de lis design into the stippling on the spine and also the gold wire inlay in the butt of the knife. Stippling over the inlayed gold spreads out the gold and provides an even stronger mechanical lock. It really is a fantastic finishing touch to this superb piece.
"Small Print"
The knife is in Europe and I will ship to most places/ Price includes standard shipping with limited insurance. Buyer bears risk unless they opt for more secure shipping via Fedex , additional cost for this is $60.00. Payment via bank transfer or paypal (add 4%). By making an offer to purchase you are confirming that you are over 18 years of age and the knife does not contravene any local or national laws in your place of residence.
Knife will ship in a Bills Custom zippered case, the best in the business and worth $40.00
Any questions please PM or email me.
Thanks for looking,
Stephen
Will consider full and partial trades against Ryuchi Kawamura Slip joints, and watches from Breitling, Rolex, Omega, IWC, Sinn, Stowa.
Super rare, totally unique.
With an OAL of 12 1/4 inches and a blade length just short of 7 inches, this is an absolutely exquisite knife by the tremendously talented Dan Farr.
First off the blade construction, forged from 5160, Dan has given this blade a slight recurve and a subtle drop point, the spine is apexed rather than flat or radiused, the final finish is 800 grit hand rubbed . The most striking aspect is the fuller, an unusual incorporation in today's forged blade, this rarity is partly due to the work involved in adding the feature - no milling or power tools here, just plain old elbow grease ,abrasive papers and many many hours. Dan has put a lot of time, effort and consideration into his blade design, edge geometry, handle design, angles, thickness,weight and balance, such that he is able to construct his knives to specific purposes, knives that look very similar in photographs will have very different persona's in the hand. That being said Dan did inform me that this little delicate flower (Fluer de lis!!!) is still able to cut 2 pieces of rope in one go!
The handle on this piece, and the feature that lends it its name, is really exceptional. The multiple finger grooves and swollen back allow your hand to grasp the knife perfectly. The stippling providing just enough grip and friction to maintain confidence in the most challenging environment.
As with all of Dan's knives the finish he puts on this walnut is amongst the best you will see. He put about 7 coats of finish on the wood, sanding in between. It is then coated in mineral oil, sanded with 600grit to remove any dust specs, or imperfections. Next its cleaned and coated with oil again and sprinkled with fine pummice and rubbed until the shine is removed. Finally Dan rubs on a slurry of rotten stone and mineral oil to bring the finish to a satin, it is also a very repairable finish for the users amongst us.
Finally, Dan has worked in the Fleur de lis design into the stippling on the spine and also the gold wire inlay in the butt of the knife. Stippling over the inlayed gold spreads out the gold and provides an even stronger mechanical lock. It really is a fantastic finishing touch to this superb piece.
"Small Print"
The knife is in Europe and I will ship to most places/ Price includes standard shipping with limited insurance. Buyer bears risk unless they opt for more secure shipping via Fedex , additional cost for this is $60.00. Payment via bank transfer or paypal (add 4%). By making an offer to purchase you are confirming that you are over 18 years of age and the knife does not contravene any local or national laws in your place of residence.
Knife will ship in a Bills Custom zippered case, the best in the business and worth $40.00
Any questions please PM or email me.
Thanks for looking,
Stephen
Last edited: