ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,465
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Darrel Ralph DDR/RPB 4" Madd Maxx - like new - $2400
Full dress 4" version of the discontinued Madd Maxx
Just returned back from spa so it's been tuned, refinished, and sharpened by the maker
Stainless damascus blade with a nice fuller
Stainless damascus front side and lock side with scalloping on the inside edges
The front has a presentation grade white mother of pearl overlay that also has a presentation grade brown-lip mother of pearl inlaid into it
The entire overlay has been contoured and scalloped, it shimmers in the light and the color changes with the angle so my camera can't do it justice
Rich bronze anodized hardware, standoffs, and deep carry clip
Fit and finish is perfect
Centering is dead on and lockup is tight
2. Jim Burke Runt Auto Prototype - near mint - $700
One of the best designed small knives I've had
There were very few automatic Runts made and this is a prototype, I've only seen 1 other
Only has 2.25" of cutting edge but feels like a much more substantial knife with the way it likes to be held in hand
Stonewashed blade with a satin main grind
The anodizing work is top notch, frame is tumbled blurple with a dot pattern that runs the spectrum
Blue backspacer with satin highs
Fits very well in hand
Opens 100% reliably
Locks up securely if you make sure the button-lock fully engages
Centering is dead on
3. Mark Nevling/Burr Oak Knives Combat Utility Basic - like new - $500
Very well built 3.375" linerlock
Blade is a full flat grind wharncliffe made from clay hardened W2 with a nice hamon
There are tool mark accents added on both sides of the blade
Frame is contoured with polished carbon fiber bolsters and burgundy micarta scales
Full length blackened backspacer
Smooth action, locks with zero play, and centering is dead on
Comes with a custom stitched leather belt sheath with burgundy stingray
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Darrel Ralph DDR/RPB 4" Madd Maxx - like new - $2400
Full dress 4" version of the discontinued Madd Maxx
Just returned back from spa so it's been tuned, refinished, and sharpened by the maker
Stainless damascus blade with a nice fuller
Stainless damascus front side and lock side with scalloping on the inside edges
The front has a presentation grade white mother of pearl overlay that also has a presentation grade brown-lip mother of pearl inlaid into it
The entire overlay has been contoured and scalloped, it shimmers in the light and the color changes with the angle so my camera can't do it justice
Rich bronze anodized hardware, standoffs, and deep carry clip
Fit and finish is perfect
Centering is dead on and lockup is tight
2. Jim Burke Runt Auto Prototype - near mint - $700
One of the best designed small knives I've had
There were very few automatic Runts made and this is a prototype, I've only seen 1 other
Only has 2.25" of cutting edge but feels like a much more substantial knife with the way it likes to be held in hand
Stonewashed blade with a satin main grind
The anodizing work is top notch, frame is tumbled blurple with a dot pattern that runs the spectrum
Blue backspacer with satin highs
Fits very well in hand
Opens 100% reliably
Locks up securely if you make sure the button-lock fully engages
Centering is dead on
3. Mark Nevling/Burr Oak Knives Combat Utility Basic - like new - $500
Very well built 3.375" linerlock
Blade is a full flat grind wharncliffe made from clay hardened W2 with a nice hamon
There are tool mark accents added on both sides of the blade
Frame is contoured with polished carbon fiber bolsters and burgundy micarta scales
Full length blackened backspacer
Smooth action, locks with zero play, and centering is dead on
Comes with a custom stitched leather belt sheath with burgundy stingray