Darrel Ralph Dominator, Hinderer XM-24, Emerson Journeyman, CQC-7A, and a ZT 0303

Status
Not open for further replies.

ShadyMethods

Platinum Member
Feedback: +318 / =0 / -1
Joined
Apr 9, 2016
Messages
3,465
I'll be here to answer any questions you might have about what's listed. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or email. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and Paypal fees in the US. I'll be happy to ship international but the buyer will need pay via F&F, assume all risks, and cover the cost of shipping. Thanks for your time.

For trades, I'm looking for a: Spyderco Magnitude, Spyderco Lum Chinese, Spyderco Myrtle, Spyderco Nirvana, Striders, BM 610 Ruckus, BM 51 Morpho, old pivot Umnumzaan, Cold Steel 4-Max, Choil-less Hinderer XM, Emerson Iron Dragon, Emerson Big Bulldog, Super SOCFK, and double action OTFs but I'll be happy to hear other offers. Worst I can do is pass and cash can be added either way.

If you are planning to send me an email through the forum, please post on the thread as well to let me know. Some of those are lost in transit and never reach my inbox.

1. DDR Darrel Ralph Dominator Level 1 - near mint - $450 --> Sold
Two-tone blade with satin flats and blackwashed grinds
Two-tone handle that was blasted and then the high parts were given a satin finish
It has been lightly carried but doesn't show much wear
Rock solid lockup with no play in any direction
Perfect centering
Has a very fast and snappy action; it's hard to not have the blade open all the way
Comes with the original DDR padded pouch

aVsCJCH.jpg
p1iMLxL.jpg


7uPIQs3.jpg
A3YYLwH.jpg


SgvlZse.jpg
iuHrpMH.jpg


QZTDgsQ.jpg


2. Hinderer XM-24 - near mint - $450
Working finish wharnecliffe blade
M390 blade
OD green G-10 scale
The lockside originally had a working finish as well it has been sanded to give it a different look
The washers have been switched out for phosphor bronze one; original teflon washers are included
Centering is perfect and lockup is rock solid
Has a fast snappy action, flips open with authority
Other than the lockside, brand new

3p5xNyD.jpg
p3RqDrY.jpg


KHGD2XJ.jpg
7HTcni0.jpg


9zyfYkW.jpg
SeyYV3Q.jpg


3. Emerson Journeyman SFS - brand new in box - $185 --> Sold
Serial number 488
Built in 2013 with standoffs
Limited avalability model from EKI
Perfect example of an Emerson
Tight lockup with no play at all, perfect centering, and smooth action

B21KxpI.jpg
WFJmYtU.jpg


d0BP7b3.jpg
hoeHS7u.jpg


tfIRUGx.jpg
62UmP08.jpg


4. Emerson CQC-7A SF - near mint - $140
Serial number 2380
Built in 2014 with standoffs
Wave-less
V-ground
Another perfect example
Liquid smooth action, solid lockup, and the blade sits dead center
Very close to brand new and comes with all the original packaging

wvbPkHD.jpg
Mt60fNF.jpg


QXbXG2x.jpg
JfIgIU7.jpg


I0xZjjy.jpg
Pz3rBLx.jpg


5. Zero Tolerance 0303 - near mint - $250 --> Traded
Serial number 2679
Tiger striped blade
Black G-10 scale on the front
Assisted opening
Blade sits dead center, locks up solid with no play, and action is smooth

oR9C0Qp.jpg
zP5vcBx.jpg


xv4jly3.jpg
FFoH2Je.jpg


Mt0OWNj.jpg
 
Last edited:
The Dominator is about the same size as an XM-18 but is as thick as an XM-24. The clip is nicely made and easy to use one-handed. When clipped, a bit more of the handle sticks out of your pocket than an XM. Weight is somewhere in between the a 18 and 24. Hope this helps.

The Journeyman has been sold.
 
Status
Not open for further replies.
Back
Top