David Clark Grunt, Allen Elishewitz Origin, WR Prometheus, Dwaine Carrillo Tunnel Ratt, Jeff Hall/Liong Mah Rogue, Gavko Spinner

[ShadyMethods]

I'm trying to switch up the collection so here are some knives I'm putting up for trade. I'll be here to answer any questions you might have. If you need more details/specs/pictures, just shoot me a message and I'll have them sent over. If you're interested, feel free to start a conversation or email me at kenleung1995 at hotmail dot com. I try to check my threads fairly often so chances are I'll see your posts as well. If you just want a straightforward sale, let me know and we can have something worked out. Thanks for taking a look.

For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Broadwells, Black Snow Customs, VanderMeulens, Chris Goodwyns, Rogovets, Mosiers, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, and maybe a custom Emerson or just Striders in general but I'm always open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.

1. David Clark Grunt - lightly carried - Traded
4" bladed non-flipper version of the Grunt
San mai damascus blade
Contoured satin finished frame with 3 holes in the front
Matching san mai backspacer
Monochromatic black timascus clip
Mirror polished pivot
There are some light scratches on the frame
Lockup is early but very solid, some slight stick but still very easy to disengage
Drop shut smooth with a strong snappy detent

2. Allen Elishewitz Origin - like new - Sold
Perfectly built 3.75" flipper
Has the new Elishewitz Tetra Lock that works like a button compression lock
Damascus blade with satin flats
Contoured zirconium bolsters
Polished and contoured C300 carbon fiber scales
Stippled Tetra Lock button
Blue liners with interior jeweling and orange-peel edges
Custom hardware
Flips great, perfectly centered, and locks with no play in any direction

3. WR Bladeworks Prometheus - near mint - Sold
Acidwashed 3.75" CPM-S35VN blade
Contoured and acidwashed ti bolsters
Polished and contoured lightning strike carbon fiber scales
Deep carry clip
Gear pattern backspacer
Centering slightly favors the lock side
If you grab the blade and wrench on it, you can barely feel a small bit of play
Amazingly smooth nearly drop shut action
Well tuned action, flies open and locks with a snap
Blade hole is fully functional and it can be Spydieflicked

 

[ShadyMethods]

4. Dwaine Carrillo Tunnel Ratt - near mint
Insane overbuilt folder
Compound recurve blade that slightly over 4"
Contoured black G-10 show side with a lot of milling
Satin lockside
Tumbled blue and gold striped clip
Red hard anodized aluminum on the thumbstuds and clip standoffs
Smooth action and it locks with zero play

5. Jeff Hall/Liong Mah Rogue - like new
This one has been my 1 custom karambit for a while
I never ended up carrying it so it’s on the chopping block
Not many of these Liong Mah collabs are out there
2-tone satin blade
Layered green and black G-10 scales with some hand texturing
Smooth action, perfect centering, and locks with no play
Works as a front flipper

6. Gavko Custom Spinner
Full custom 4" bladed spinner
Mike went all out hand texturing this one
It's on the frame, edges of the frame, clip, backspacer, blade flat, blade spine, edges of the flipper, inside of the backspacer, and even the inside of the blade hole
The frame is contoured and anodized green/blue and it's tumbled so you see blue flecks if you move it in the light
Good lockup
Flips great and can be spydieflicked
Centering slightly favors the front