Thinning the herd yet again...
Paypal only, all prices net to me and include priority shipping within the 50 US, not considering trades or international shipping at the moment. Any questions, please send via PM as my email is down right now. Dibs to the first person to claim blade(s) via post in this thread or PM (by timestamp). Thanks for looking.
Dervish Comanche -- SOLD
Made in December 2012 with hand-rubbed, Bohler N690 blade, Ti-liners and desert camo g-10. Stout little Tank of a knife with excellent finish, rock solid, early lock-up and centered blade (no up/down or side to side play) and excellent blade to handle ratio. Knife is near mint and only signs of use on the blade and clip are minor marks that are difficult to see unless at certain angles under certain lighting. Oal is approx 6 -3/4", cutting edge is right @ 3". John's order book is currently closed, but here's a chance at some instant gratification. Comes with small padded zip case and Dervish Knives "stats" card.
Samuel Guichard "London" Slipjoint -- 650.00
OAL: 7-1/8"
Cutting Edge: 3"
Elegant gentleman's folder with ivory scales, black liners and multi-layered takefu suminagashi blade steel as received from Monsieur Guichard. Samuel is is a French Maker with a 2 year wait and, to my knowledge, this is the first of his work to be offered in the Cove. Only flaw with this knife is that the blade is not centered. Though not centered, the blade does not rub.
More examples of his work here: LINK (more pictures of this specific knife in post# 115 in the linked thread).
Graham Stubby Razel -- sold!
Stubby Razel with honey colored g-10, mosaic pins, and 3/16" 154 CPM blade steel. Knife was used to break down a few boxes and there are some very minor marks on the hand rubbed blade (can only be seen at certain angles and in certain lighting conditions). Minor pin-prick scar on the g-10 near the butt of the handle - see pictures. Comes with awesome little leather pocket sheath made by Messrs Graham. Sweet little pocketable fixed blade.
Edmonson Viper -- 110.00
6-3/4" OAL
2-3/4" from the top of the cord wrap to the tip
1-1/4" blade width
1/4" thick 1095
Hollow ground on top and bottom with sharp but not sharpened swedge. Leather sheath comes with buttons so you dont have to take your belt off to put it on. OD Green Cord wrap is not expoxy treated and has a turks head on the bottom of the wrap. Knife has been very lightly used and has minor oxidation/rust (see pictures), but the maker also left a rough forged finish on the flats so all of the dark spots you see are not oxidation. Cool blade, but just not seeing use.
PML Knives Witches Finger - sold
6-1/4" OAL
3" Blade Length
3/16" thick
S30V Steel
Carbon fiber scales, Ti fasteners
Kydex sheath with Paul's cool belt/pant clip, slight kydex marks on blade from admiration sessions. Never carried or used to cut anything other than paper.
Paypal only, all prices net to me and include priority shipping within the 50 US, not considering trades or international shipping at the moment. Any questions, please send via PM as my email is down right now. Dibs to the first person to claim blade(s) via post in this thread or PM (by timestamp). Thanks for looking.
Dervish Comanche -- SOLD
Made in December 2012 with hand-rubbed, Bohler N690 blade, Ti-liners and desert camo g-10. Stout little Tank of a knife with excellent finish, rock solid, early lock-up and centered blade (no up/down or side to side play) and excellent blade to handle ratio. Knife is near mint and only signs of use on the blade and clip are minor marks that are difficult to see unless at certain angles under certain lighting. Oal is approx 6 -3/4", cutting edge is right @ 3". John's order book is currently closed, but here's a chance at some instant gratification. Comes with small padded zip case and Dervish Knives "stats" card.
Samuel Guichard "London" Slipjoint -- 650.00
OAL: 7-1/8"
Cutting Edge: 3"
Elegant gentleman's folder with ivory scales, black liners and multi-layered takefu suminagashi blade steel as received from Monsieur Guichard. Samuel is is a French Maker with a 2 year wait and, to my knowledge, this is the first of his work to be offered in the Cove. Only flaw with this knife is that the blade is not centered. Though not centered, the blade does not rub.
More examples of his work here: LINK (more pictures of this specific knife in post# 115 in the linked thread).
Graham Stubby Razel -- sold!
Stubby Razel with honey colored g-10, mosaic pins, and 3/16" 154 CPM blade steel. Knife was used to break down a few boxes and there are some very minor marks on the hand rubbed blade (can only be seen at certain angles and in certain lighting conditions). Minor pin-prick scar on the g-10 near the butt of the handle - see pictures. Comes with awesome little leather pocket sheath made by Messrs Graham. Sweet little pocketable fixed blade.
Edmonson Viper -- 110.00
6-3/4" OAL
2-3/4" from the top of the cord wrap to the tip
1-1/4" blade width
1/4" thick 1095
Hollow ground on top and bottom with sharp but not sharpened swedge. Leather sheath comes with buttons so you dont have to take your belt off to put it on. OD Green Cord wrap is not expoxy treated and has a turks head on the bottom of the wrap. Knife has been very lightly used and has minor oxidation/rust (see pictures), but the maker also left a rough forged finish on the flats so all of the dark spots you see are not oxidation. Cool blade, but just not seeing use.
PML Knives Witches Finger - sold
6-1/4" OAL
3" Blade Length
3/16" thick
S30V Steel
Carbon fiber scales, Ti fasteners
Kydex sheath with Paul's cool belt/pant clip, slight kydex marks on blade from admiration sessions. Never carried or used to cut anything other than paper.
Last edited: