Direware S-96, Graham GL Razel, Dustin Snyder Echo, Moon Stormcrow, Hoback A10, Zieba S3, Curtiss F3

Status
Not open for further replies.

ShadyMethods

Platinum Member
Feedback: +320 / =0 / -1
Joined
Apr 9, 2016
Messages
3,465
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.

For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Jim Burkes, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.

1. Direware S-96 - like new - $900
Slightly smaller than the Solo but just as tough
2-tone M390 non-recurve blade
Blade has a stonewashed satin on the flats and a satin on the grinds
The front handle slab is a big piece of contoured and polished original marble carbon fiber
Blasted ti lockside
Glass smooth action with a nice snappy detent
Not yet completely broken in but already drops shut
Centering and lockup are perfect

qRElFzo.jpg
pwY8qA3.jpg


DLAFMoj.jpg
cqA3AxS.jpg


aPnV7lZ.jpg
KjNVdbF.jpg


2. Graham Knives Custom GL Razel - like new - $1000
Slightly older version running on phosphor bronze washers
Thinnest blade stock I've seen Jon use
It's paper thin behind the edge and still has Jon's edge so it's a lightsaber, even slices with the razel tip
Blackwashed and Bos heat treated CPM-154CM blade with his signature grind
Show side is lightly textured brown G-10
Lock side has a bronzed working finish
Not 100% broken in so it occasionally has lock stick
Runs smooth and has an impressive action
Centering is perfect and it locks with zero play in any direction
Handle is contoured and very comfortable in hand

yB9ZQco.jpg
bBynUp4.jpg


NxaOKl7.jpg
Vv6Xqmu.jpg


6ppzQXE.jpg
BoOHcV3.jpg


3. Dustin Snyder Echo - near mint - $750 --> Traded
Well built Small Sebenza 21 sized custom that's slim and disappears in the pocket
Frame has been contoured and has milling on both sides
Black timascus clip
Runs glass smooth on bearings and the blade will drop shut
Locks up rock solid and centering very close to perfect

DCrtHoA.jpg
WywAcy3.jpg


JlP46mj.jpg
jNAKTnC.jpg


m1kyAVV.jpg
oaJSR2U.jpg
 
Last edited:
4. Will Moon Stormcrow - near mint - $450
Upgraded with a CPM-20CV tanto blade
2-tone hand satin blade with a mirror satin on the flats
Black frame with the new clamshell construction
Blasted inset linerlock and Begg-style clip
Runs smooth on caged bearings and flips well
There is some slight blade play that might go away as the knife breaks in
Blade sits well centered

hIS6uNf.jpg
eIzAXvf.jpg


UN9lJtP.jpg
kXpX7Iq.jpg


h4oKcek.jpg
YbOuuPi.jpg


5. Jake Hoback Custom A10 - like new - $600
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame had been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on

Be59wn0.jpg
mwXzseV.jpg


XUF6dlr.jpg
7gvb8IN.jpg


yn4CoVw.jpg
Goq1hBM.jpg
 
6. Zieba Knives S3 - near mint - $450
Upgraded version with the fully carved copper skull backspacer
3.4" stonewashed blade in nearly rustproof Nitro-V steel
Contoured frame that's been extensively milled out on the inside making it lighter than you'd expect
Lightly textured G-10 front scale
Smooth drop-shut action, rock solid lockup, and perfect centering

WccOLsN.jpg
2KUx5HB.jpg


k2jvUfD.jpg
ecgL3u2.jpg


MzV8os6.jpg
Bn4cN4t.jpg


7. Curtiss Knives Large F3 Wharncliffe - near mint - $680
Slightly older version with slightly different CPM-S35VN blade
Jimping on the blade is raised and there are some custom touches on the spine near the tip
Acidwashed blade with a stonewashed satin on the flats
Lightly orange-peeled ti frame
Subtly flamed hardware, backspacer, and 2-tone pivot
Action is glass smooth, locks with zero play, and centering is perfect

rD9lapt.jpg
yWeRoUi.jpg


x9Ib2NX.jpg
yVvwrnP.jpg


kGqcqZ9.jpg
0igcyoj.jpg


8oZRNpj.jpg
 
Status
Not open for further replies.
Back
Top