- Joined
- Mar 8, 2014
- Messages
- 153
Direware Solo V2 1,000.00 NET Shipped.
This one has been used but not abused. There are some signs of carry wear on the clip and lock-side that I've done my best to capture in the photos - it's hard to make them out against the finish which hides them well (bronzed and tumbled). Blade is in great shape but could use a quick sharpening (I contacted Direware and Eric said he would do it for free, you just pay shipping). CF side is pretty much flawless. A few of the standoffs have scuffs on them and a few screw heads have some wear. Very smooth action with ROCK SOLID lockup - I mean.....it's a Direware...
Pics:
https://fbcdn-sphotos-c-a.akamaihd....674_613283155423985_3889367325566835362_o.jpg
https://scontent-a-dfw.xx.fbcdn.net...605_613283175423983_2149182034538373171_o.jpg
https://scontent-a-dfw.xx.fbcdn.net...5302_613283188757315_978283134769261371_o.jpg
https://scontent-b-dfw.xx.fbcdn.net...7822_613283202090647_294138386626162586_o.jpg
https://fbcdn-sphotos-b-a.akamaihd....637_613283228757311_7779768560066613282_o.jpg
http://instagram.com/p/n9I2GiAHVn/
http://instagram.com/p/nT7zACAHWB/
Lightfoot Full Contact Fighter - Asking $750.00 - Now 700.00 NET OBO
This is brand new...only carried once. Comes with original case and shark tooth lanyard.
CF Scales, CF Tip-up Clip, Satin grinds - not positive on blade steel...I know Greg works with 154 quite a bit. This is a non-thumb ramp version but is gimped.
https://scontent-b-ord.xx.fbcdn.net...766_635710893181211_2212317678823310318_n.jpg
https://scontent-b-ord.xx.fbcdn.net...807_615787698506864_6480261759017222785_n.jpg
https://fbcdn-sphotos-a-a.akamaihd....201_635710889847878_4540737632860311322_n.jpg
https://fbcdn-sphotos-b-a.akamaihd....818_635710903181210_5039006959397981185_n.jpg
Full Disclosure: The only "blem" I can find in the knife is a slight line in the CF on the clip when you hold it in the right light. These are also "known" to have their pivots loosen from time to time, but I have not seen that as an issue on this one as of yet.
Will Moon Mk6a1 "Prototype" (1 of the 5) - Asking $750.00 - Now 700.00 NET OBO
This one has been used. You can see a slight scuff on the flat of the blade and a scratch on the bolster lock. When I got this one, I sent it into Will to have the lock face re-carbidized as it was experiencing some slight vertical play...Will corrected the issue and it currently locks up solid! Now onto the fun parts.....this thing flips like a ROCKET. Super fast out of a strong detent. This is from Will regarding the knife:
" The Mk6 you have is actually a pretty cool one. When I first started making the original Mk6s, they had slabside handles that were flat, the idea was to reduce the amount of time I had to spend hand fitting the knives once I pulled the parts off the mill, but the knives really felt a little bulky in hand and clumsy in the pocket. Every time I change a significant aspect of a design, I give it a new designation, in this case it became the M6A1. Originally I made a testbed run of five M6A1s that had hand contoured frames to see if people would like that style of frame better, and people did, so I kept making them like that. However the original run of five M6A1s all had CPM-S30V blades, including yours. I normally run CPM-154 on my knives, which is a fantastic all-around steel, but the S30V is a definite upgrade. "
https://fbcdn-sphotos-e-a.akamaihd....720_640465136039120_6920469921851453346_o.jpg
https://scontent-a-dfw.xx.fbcdn.net...155_640465139372453_7172076956273773759_o.jpg
https://fbcdn-sphotos-b-a.akamaihd....5062_640465162705784_876769703267260570_o.jpg
https://scontent-b-dfw.xx.fbcdn.net...107_640465192705781_7797857698672642167_o.jpg
This one has been used but not abused. There are some signs of carry wear on the clip and lock-side that I've done my best to capture in the photos - it's hard to make them out against the finish which hides them well (bronzed and tumbled). Blade is in great shape but could use a quick sharpening (I contacted Direware and Eric said he would do it for free, you just pay shipping). CF side is pretty much flawless. A few of the standoffs have scuffs on them and a few screw heads have some wear. Very smooth action with ROCK SOLID lockup - I mean.....it's a Direware...
Pics:
https://fbcdn-sphotos-c-a.akamaihd....674_613283155423985_3889367325566835362_o.jpg
https://scontent-a-dfw.xx.fbcdn.net...605_613283175423983_2149182034538373171_o.jpg
https://scontent-a-dfw.xx.fbcdn.net...5302_613283188757315_978283134769261371_o.jpg
https://scontent-b-dfw.xx.fbcdn.net...7822_613283202090647_294138386626162586_o.jpg
https://fbcdn-sphotos-b-a.akamaihd....637_613283228757311_7779768560066613282_o.jpg
http://instagram.com/p/n9I2GiAHVn/
http://instagram.com/p/nT7zACAHWB/
Lightfoot Full Contact Fighter - Asking $750.00 - Now 700.00 NET OBO
This is brand new...only carried once. Comes with original case and shark tooth lanyard.
CF Scales, CF Tip-up Clip, Satin grinds - not positive on blade steel...I know Greg works with 154 quite a bit. This is a non-thumb ramp version but is gimped.
https://scontent-b-ord.xx.fbcdn.net...766_635710893181211_2212317678823310318_n.jpg
https://scontent-b-ord.xx.fbcdn.net...807_615787698506864_6480261759017222785_n.jpg
https://fbcdn-sphotos-a-a.akamaihd....201_635710889847878_4540737632860311322_n.jpg
https://fbcdn-sphotos-b-a.akamaihd....818_635710903181210_5039006959397981185_n.jpg
Full Disclosure: The only "blem" I can find in the knife is a slight line in the CF on the clip when you hold it in the right light. These are also "known" to have their pivots loosen from time to time, but I have not seen that as an issue on this one as of yet.
Will Moon Mk6a1 "Prototype" (1 of the 5) - Asking $750.00 - Now 700.00 NET OBO
This one has been used. You can see a slight scuff on the flat of the blade and a scratch on the bolster lock. When I got this one, I sent it into Will to have the lock face re-carbidized as it was experiencing some slight vertical play...Will corrected the issue and it currently locks up solid! Now onto the fun parts.....this thing flips like a ROCKET. Super fast out of a strong detent. This is from Will regarding the knife:
" The Mk6 you have is actually a pretty cool one. When I first started making the original Mk6s, they had slabside handles that were flat, the idea was to reduce the amount of time I had to spend hand fitting the knives once I pulled the parts off the mill, but the knives really felt a little bulky in hand and clumsy in the pocket. Every time I change a significant aspect of a design, I give it a new designation, in this case it became the M6A1. Originally I made a testbed run of five M6A1s that had hand contoured frames to see if people would like that style of frame better, and people did, so I kept making them like that. However the original run of five M6A1s all had CPM-S30V blades, including yours. I normally run CPM-154 on my knives, which is a fantastic all-around steel, but the S30V is a definite upgrade. "
https://fbcdn-sphotos-e-a.akamaihd....720_640465136039120_6920469921851453346_o.jpg
https://scontent-a-dfw.xx.fbcdn.net...155_640465139372453_7172076956273773759_o.jpg
https://fbcdn-sphotos-b-a.akamaihd....5062_640465162705784_876769703267260570_o.jpg
https://scontent-b-dfw.xx.fbcdn.net...107_640465192705781_7797857698672642167_o.jpg