Thinning out the herd today due to some unforeseen expenses. These all come with original boxes and packaging.
First up is the freshly released Cutlery Shoppe exclusive PM2 Wharncliffe ZrOC Rex121. These feature a new Zirconium OxyCarbide coating on Rex 121 blade steel. Just dropped last Friday and sold out in about 5 minutes. This one is BNIB; only out for pics and vid. Comes with all the original goodies from CS.
Vid - https://drive.google.com/file/d/1N02OaBmBUpRsDO953nr-QMKGEdvFOlya/view?usp=drivesdk
SV SOLD
Next is the discontinued Endura Wharncliffe K390. This one has been sharpened professionally at 15dps and is hair popping sharp. Very slight bit of patina on the blade that can only be seen from a particular angle and under certain specific lighting. I did my best to show in the vid. Tiny bit of wear on the clip. Otherwise is flawless. Centering is perfect. Never cut or carried. These were discontinued in 2023 and are sold out everywhere.
Vid - https://drive.google.com/file/d/1Gb6qIA-CpTNxLfaSvHV1R1ezNBH2Weoj/view?usp=drivesdk
SV SOLD
Last is a Custom Para 3 CruWear w/BarclayCNC Titanium Scales, Flytanium Backspacer, RGT Lanyard Plug, and Lynch Clip. Edge has been mirror polished. This one is flawless with no cut or carry. I took the blade from a CruCarta variant, and the liners from a Grinch KnifeJoy variant and put Barclay Titanium Bronze Draco's Armor scales on it. As such, this will come with the stock scales and liner from the Grinch/Neon green para3 which was the liner donor. Comes with box correlating to the CruWear blade.
Vid - https://drive.google.com/file/d/1uDIBShy-rUI7igOfJm_-qAl48MRaSI8F/view?usp=drivesdk
SV 250
CashApp is my preferred payment method but I can also accept ChimePay and PayPal if needed. Feel free to reach out with any questions. Trades for other Spydercos will be considered if in my favor, but mostly just looking to sell.
Thanks for looking!
First up is the freshly released Cutlery Shoppe exclusive PM2 Wharncliffe ZrOC Rex121. These feature a new Zirconium OxyCarbide coating on Rex 121 blade steel. Just dropped last Friday and sold out in about 5 minutes. This one is BNIB; only out for pics and vid. Comes with all the original goodies from CS.
Vid - https://drive.google.com/file/d/1N02OaBmBUpRsDO953nr-QMKGEdvFOlya/view?usp=drivesdk
SV SOLD
Next is the discontinued Endura Wharncliffe K390. This one has been sharpened professionally at 15dps and is hair popping sharp. Very slight bit of patina on the blade that can only be seen from a particular angle and under certain specific lighting. I did my best to show in the vid. Tiny bit of wear on the clip. Otherwise is flawless. Centering is perfect. Never cut or carried. These were discontinued in 2023 and are sold out everywhere.
Vid - https://drive.google.com/file/d/1Gb6qIA-CpTNxLfaSvHV1R1ezNBH2Weoj/view?usp=drivesdk
SV SOLD
Last is a Custom Para 3 CruWear w/BarclayCNC Titanium Scales, Flytanium Backspacer, RGT Lanyard Plug, and Lynch Clip. Edge has been mirror polished. This one is flawless with no cut or carry. I took the blade from a CruCarta variant, and the liners from a Grinch KnifeJoy variant and put Barclay Titanium Bronze Draco's Armor scales on it. As such, this will come with the stock scales and liner from the Grinch/Neon green para3 which was the liner donor. Comes with box correlating to the CruWear blade.
Vid - https://drive.google.com/file/d/1uDIBShy-rUI7igOfJm_-qAl48MRaSI8F/view?usp=drivesdk
SV 250
CashApp is my preferred payment method but I can also accept ChimePay and PayPal if needed. Feel free to reach out with any questions. Trades for other Spydercos will be considered if in my favor, but mostly just looking to sell.
Thanks for looking!
Attachments
Last edited: