DPX. Emerson and a bunch of users.

agbt26

agbt26

Platinum Member
Feedback: +17 / =0 / -0
Joined
May 15, 2021
Messages
110
DPX Leggaro in M390 (B+) $250

  • I am at least the second owner.
  • No carry, cut or sharpen.
  • Fits great in pocket and the "bottle opener" will deploy the knife from the pocket with a bit of practice.
Emerson Vindicator in CPM 154 (B) $200.

  • I am at least the second owner.
  • No carry, cut or sharpen. She came to me mirrored.
  • Aftermarket thumb button and deep carry clip. Originals not available.
Benchmade Rift in CPM 154 (C) $145.

  • I am at least the second owner and have carried, used and maintained this knife regularly over the last 2 years.
  • Scuffs on DLC.
  • Aftermarket deep carry clip and hardware. Originals not available.
Benchmade 710 in D2 (B) $145.

  • I purchased this knife as new old stock at Backwater Guns in Wilmington NC a couple years back and I have carried, used and maintained this knife regularly over the last couple of years. No hard use.
  • Aftermarket deep carry clip.
  • Extra set of Aramis G-10 Scales included.
Benchmade Grizzly Ridge Knifework's Exclusive in CPM S30V (C) $135.

  • I am at least the second owner and have disassembled, cleaned, sharpened and stropped her.
  • Never carried or used.
  • Aftermarket thumb stud.
Boker F3.5 in D2 (C) $50.

  • I am the first owner and have carried, used and maintained this knife regularly over the last couple of years.
  • Strong detent.
  • Excellent ergonomics.
CKRT Seismic in 4116 (C) $50.

  • I am the first owner and have carried, used and maintained this knife regularly over the last couple of years.
  • Best fidget knife on the market.
  • Four inches that rips open with a front flip as well as a stud flip and a Deadbolt lock to boot.
CKRT Particle Separation Device (PSD) in 1.4116 High Carbon (D) $40.

  • I am the first owner and have carried, used and maintained this knife regularly over the last couple of years.
  • Painted and clear coated the backspacer.
  • De-assisted.
  • SHARP.
 
Exchange forum: not following the rules
CONUS shipping only. I will trade up, down or even. I like PayPal but may consider others. I will ship the next day at the LATEST.

https://imgur.com/a/UgGCfMV

DPX Leggaro in M390 - $275. (B+) I am not the first owner. I have the correct box and packaging. I have not carried nor touched this knife with a tool or stone. Catch and release.

https://imgur.com/a/4S5exs6

ZT 0562GRY in 20CV - $250. (B) Not first owner and has no box. I have not carried nor touched this knife with a tool or stone. Catch and release.

https://imgur.com/a/ScPEBEa

Benchmade Stryker in 154CM - $200. (C) Sharpened, aftermarket thumb stud and axis lock bar. I am at least the second owner. No Box. I have sharpened, honed and stopped the blade. Tritium inserts on lock bar and thumb stud. One side of the thumb stud does not illuminate. I don't know why.

https://imgur.com/a/MyFHGhW

Benchmade Vicar - $ 150. (D) Hard use, irreversible mods and weak detent First Owner/ This was my deployment knife for Africa and Iraq. No Box. I acid etched, stone washed, sharpened, honed and stopped the blade. I have disassembled, re-assembled and cleaned the knife with a variety of cleaners / solvents. I coated the scales. Aftermarket thumb stud. Detent can be overcome by inertia...It can be wrist flicked open.

https://imgur.com/a/FS4I8iO

ZT 0220 in S35VN - $125. (C) Sharpened, used and grip taped. At least second owner. I have sharpened, honed and stopped the blade. I have disassembled, re-assembled and cleaned the knife with a variety of cleaners / solvents. Grip tape added by an owner prior. Excellent user.
 
You must log in or register to reply here.
Back
Top