Robert Erickson
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 2, 2014
- Messages
- 2,889
Hey guys,
I've got three of them up for grabs tonight. A little variety going on in the shop which is always fun.
1)
The first one is a re-post of a hunter I did last month. It's AEB-L steel and African Blackwood handles. It's full flat ground and sharpened to 17 DPS. The blade is 0.13" AEB-L heat treated to RC61 by Peter's. The liners are black and white G10. It has bronze pins and a carbon fiber lanyard tube. A leather sheath is included.
Specs:
OAL: 9"
Blade: 4" long, 1.5" wide full flat grind, hand sanded to 600 grit, edge is 0.009" before sharpening.
Steel: 0.13" AEB-L heat treated by Peter's to RC61
Handle: African Blackwood, black and white G10 liners with bronze pins and carbon fiber lanyard tube.
Kydex or leather sheath included, buyer to choose.
$190 Shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM me for payment arrangements.
2)
The second is an AEB-l Bird-n-Trout. It's also AEB-L steel (0.06" thick). It has some really nice (and fairly rare) stabilized Olivewood Burl. It's accented with black and tan liners. This one would also be happy in the kitchen as a paring or small fillet knife.
Specs:
OAL: 8.5"
Blade: 4.5" long, 1" wide, high flat grind with rounded spine and distal taper. It has moderate flex. It is hand sanded to 600 grit and is 0.005" behind the edge. Sharpened to 17DPS
Steel: 0.06" AEB-L, HT by Peter's to RC60
Handle: Stabilized Olivewood Burl with Black and tan liners and black micarta pins.
Sheath: Kydex pre-drilled for a TekLok or equivalent clip (not included)
$SOLD Shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM me for payment arrangements.
3)
Last but not least is a little O-1 Sheepsfoot. It's got Australian Dead Finish handles and maroon linen micarta bolsters. A Kydex sheath is included. I can drill it for a TekLok if you want.
Specs:
OAL: 7.5"
Blade: 3", full flat grind, Machine satin finish and unsharpened swedge. It's 0.01" behind the edge. Sharpened to 17DPS
Steel: 0.18" O-1 steel HT by Peter's to RC59
Handle: Australian Dead Finish and maroon linen micarta bolsters. Black micarta pins and liners.
Sheath: Kydex
$SOLD Shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM me for payment arrangements.
As always comments/critiques/questions are welcomed.
Thanks!
I've got three of them up for grabs tonight. A little variety going on in the shop which is always fun.
1)
The first one is a re-post of a hunter I did last month. It's AEB-L steel and African Blackwood handles. It's full flat ground and sharpened to 17 DPS. The blade is 0.13" AEB-L heat treated to RC61 by Peter's. The liners are black and white G10. It has bronze pins and a carbon fiber lanyard tube. A leather sheath is included.
Specs:
OAL: 9"
Blade: 4" long, 1.5" wide full flat grind, hand sanded to 600 grit, edge is 0.009" before sharpening.
Steel: 0.13" AEB-L heat treated by Peter's to RC61
Handle: African Blackwood, black and white G10 liners with bronze pins and carbon fiber lanyard tube.
Kydex or leather sheath included, buyer to choose.
$190 Shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM me for payment arrangements.
2)
The second is an AEB-l Bird-n-Trout. It's also AEB-L steel (0.06" thick). It has some really nice (and fairly rare) stabilized Olivewood Burl. It's accented with black and tan liners. This one would also be happy in the kitchen as a paring or small fillet knife.
Specs:
OAL: 8.5"
Blade: 4.5" long, 1" wide, high flat grind with rounded spine and distal taper. It has moderate flex. It is hand sanded to 600 grit and is 0.005" behind the edge. Sharpened to 17DPS
Steel: 0.06" AEB-L, HT by Peter's to RC60
Handle: Stabilized Olivewood Burl with Black and tan liners and black micarta pins.
Sheath: Kydex pre-drilled for a TekLok or equivalent clip (not included)
$SOLD Shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM me for payment arrangements.
3)
Last but not least is a little O-1 Sheepsfoot. It's got Australian Dead Finish handles and maroon linen micarta bolsters. A Kydex sheath is included. I can drill it for a TekLok if you want.
Specs:
OAL: 7.5"
Blade: 3", full flat grind, Machine satin finish and unsharpened swedge. It's 0.01" behind the edge. Sharpened to 17DPS
Steel: 0.18" O-1 steel HT by Peter's to RC59
Handle: Australian Dead Finish and maroon linen micarta bolsters. Black micarta pins and liners.
Sheath: Kydex
$SOLD Shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders accepted.
Post "I'll take it" here in this thread and then email or PM me for payment arrangements.
As always comments/critiques/questions are welcomed.
Thanks!
Last edited: