Jack O'Neill
Gold Member
- Joined
- Nov 15, 2007
- Messages
- 7,176
On this drop point hunter I used para kingwood , a rare hard, heavy and oily wood from mexico . When sanded and left dry it has a purple color to it , I buffed this for the shine which causes it to look darker .
Steel is ATS-34 SS, 3/16" with a Paul Bos heat treat to an RC of 59-60
O.A.L. is 8"
Blade- tip to handle is 3 1/2 " . 1" wide at the handle.
Sharpened edge is 3 1/4"
Hollow ground with a 600 grit wheel satin finish and the flats are blade parallel 400 grit satin finished .
Handle - para kingwood with 3 SS pins.
Sheath is 8 oz , wet formed and oiled.
$115.00---------SOLD--------- will get this shipped USPS priority mail . Pay-pal , postal money orders or check ( check held for bank clearance ) .
Jack ONeill
Steel is ATS-34 SS, 3/16" with a Paul Bos heat treat to an RC of 59-60
O.A.L. is 8"
Blade- tip to handle is 3 1/2 " . 1" wide at the handle.
Sharpened edge is 3 1/4"
Hollow ground with a 600 grit wheel satin finish and the flats are blade parallel 400 grit satin finished .
Handle - para kingwood with 3 SS pins.
Sheath is 8 oz , wet formed and oiled.
$115.00---------SOLD--------- will get this shipped USPS priority mail . Pay-pal , postal money orders or check ( check held for bank clearance ) .
Jack ONeill
Last edited:
