- Joined
- May 2, 2013
- Messages
- 1,711
Once these are gone, they're gone... Want to keep numbers small
Pic heavy...
We knuckled down (pun intended....) and got together a nice group of dusters. Granted smaller quantity numbers since we had groomsman's gift orders and a small secondary retailer order that took the majority of this run. But we have the remainder here (and on my site) at reduced prices for BF members only. We saved em up so we would have more than a couple of days worth of inventory this time.
All items are a fat 1/4" thick, meaning a hundredth or so over most of the time as it arrives to me. Ti is 6Al-4v and brass is 'Naval Grade' per the description of the supplier.
All are rounded, chamfered and profiled. No sharp edges or unfinished surfaces. They're worked by hand, tumbled, worked some more and then final finished.
See below for examples, the coloration is deep and hard lasting several years with typical use.
I make these each by hand from very rough cut blanks. They are hand finished and custom colored. Any coloration/pattern on any Ti version shown can be applied to any other Ti item. This will mean a 2 day lead time for custom finishes, but no extra charge... I never repeat a design exactly and make variations if similar items are requested. Due to the hand finishing and custom coloration no two items are exactly alike...
The brass can be done in a polished plain, polished hammered or patinaed hammered finish as shown. To see polished etc check my Pintrest page or my website.
Enough chatter, here is a group photo...
Just the brass.... Brewtal (tadpole shaped one) and Olicheatman.
New plain blackened brass finish. (applied at high heat, very tough...)
Scale for the Hooker (tiniest bottle and can opener you'll ever see... Works great, just hook it on and tug the keyring.)
This new design was a request from a forum member who wanted something simple that can function as a knuck if needed and would fit big fingers or gloved hands. Works well as a 'slap' implement for females (as tested by my better half...) and opens bottles well. Holes are just a tad over 1" so smaller fingers may get lost in there...
Great blue/Purple flop color...
And the 'Hexblasted' finish on my Compinche.
We can achieve great color variations, and the oxide coloration holds up great. We blast the surface in one step prior to coloring allowing the oxide finish to be both thick and embedded to a degree. Have some designs having lived two years on keychains and still look great...
So, numbers and how to order... I have 7 of the brass Olicheatman and 7 brass Brewtals. In Titanium I have 3 double finger (Olicheatman), 6 Hookers (tiny one) and Bitchin Brewtals (tadpole shaped) we have a few if we hold of Blade HQ... The simple two finger design I have 8 of. (Simpleton)... The Compinche which is single finger I have One left... (Thanks Guys!)
They are $35 for the Brewtal in brass, Your choice of finish...
Two finger $35 in Ti or brass, any finish.
The Hooker is $15
The Compinche is $30 in Ti.
New one is $25
This price is $5 off our website price, and $10-15 off Blade HQ (not yet back in stock there yet either...) pricing and includes choice of any finish (plain grey tumbled is an option as is brushed/polished.., the matte colors are sandblasted and heat colored, masked and blasted for patterned items, the striped multicolor ones are done via a proprietary process.) Just let me know what finish when you order. Left blank will get whatever I choose. Usually something cool and unique for Ti and hammered with patina for the brass...
Combo orders (3 items +) from BF members email me directly and I'll adjust the price a little more...
All except the 'hookers' come with a small (8mm) stainless split ring and the Brewtals come with a Dewalt phillips/flat hex drive screwdriver. We have a separate holder in the works that will be out soon. Anyone buying a Brewtal or already has one will get one for free if they contact me when ready.
The prices also include free shipping in the continental US or Armed Forces postal codes. International will be calculated at actual rate, contact me for those orders and we will get you invoiced.
You may order by emailing me directly eric@overmountain.us.com and I will send you a PayPal invoice.
-
Or (best option for single item orders) you can go to our website and use the coupon code BF5OFF with a minimum order of $15.
You can pay on the website via PayPal or with our CC merchant. Just add a note with desired finish. Web addy is Overmountain.us.com
**Free US shipping on anything in the store....
See my itrader rating for reviews of transactions and elsewhere on the web for endorsement of my items.
Legalese: I cannot know the laws in every jurisdiction. If you are purchasing a knuckle duster, know first if it is legal for you to carry and use. We will not be responsible for any actions, violations of the law, or personal property damage and injury resulting from the use of our devices. All are covered by our warranty viewable on our website. And all sales are final unless otherwise arranged by contacting OKT directly at my email address. These are last ditch items designed for use as such. Exercise caution with use and always train and prepare yourself with any weapon you carry. For more information visit my website. Thank you for your purchase!
-Eric
Overmountain Knife and Tool
Overmountain.us.com
Pic heavy...
We knuckled down (pun intended....) and got together a nice group of dusters. Granted smaller quantity numbers since we had groomsman's gift orders and a small secondary retailer order that took the majority of this run. But we have the remainder here (and on my site) at reduced prices for BF members only. We saved em up so we would have more than a couple of days worth of inventory this time.
All items are a fat 1/4" thick, meaning a hundredth or so over most of the time as it arrives to me. Ti is 6Al-4v and brass is 'Naval Grade' per the description of the supplier.
All are rounded, chamfered and profiled. No sharp edges or unfinished surfaces. They're worked by hand, tumbled, worked some more and then final finished.
See below for examples, the coloration is deep and hard lasting several years with typical use.
I make these each by hand from very rough cut blanks. They are hand finished and custom colored. Any coloration/pattern on any Ti version shown can be applied to any other Ti item. This will mean a 2 day lead time for custom finishes, but no extra charge... I never repeat a design exactly and make variations if similar items are requested. Due to the hand finishing and custom coloration no two items are exactly alike...
The brass can be done in a polished plain, polished hammered or patinaed hammered finish as shown. To see polished etc check my Pintrest page or my website.
Enough chatter, here is a group photo...
Just the brass.... Brewtal (tadpole shaped one) and Olicheatman.
New plain blackened brass finish. (applied at high heat, very tough...)
Scale for the Hooker (tiniest bottle and can opener you'll ever see... Works great, just hook it on and tug the keyring.)
This new design was a request from a forum member who wanted something simple that can function as a knuck if needed and would fit big fingers or gloved hands. Works well as a 'slap' implement for females (as tested by my better half...) and opens bottles well. Holes are just a tad over 1" so smaller fingers may get lost in there...
Great blue/Purple flop color...
And the 'Hexblasted' finish on my Compinche.
We can achieve great color variations, and the oxide coloration holds up great. We blast the surface in one step prior to coloring allowing the oxide finish to be both thick and embedded to a degree. Have some designs having lived two years on keychains and still look great...
So, numbers and how to order... I have 7 of the brass Olicheatman and 7 brass Brewtals. In Titanium I have 3 double finger (Olicheatman), 6 Hookers (tiny one) and Bitchin Brewtals (tadpole shaped) we have a few if we hold of Blade HQ... The simple two finger design I have 8 of. (Simpleton)... The Compinche which is single finger I have One left... (Thanks Guys!)
They are $35 for the Brewtal in brass, Your choice of finish...
Two finger $35 in Ti or brass, any finish.
The Hooker is $15
The Compinche is $30 in Ti.
New one is $25
This price is $5 off our website price, and $10-15 off Blade HQ (not yet back in stock there yet either...) pricing and includes choice of any finish (plain grey tumbled is an option as is brushed/polished.., the matte colors are sandblasted and heat colored, masked and blasted for patterned items, the striped multicolor ones are done via a proprietary process.) Just let me know what finish when you order. Left blank will get whatever I choose. Usually something cool and unique for Ti and hammered with patina for the brass...
Combo orders (3 items +) from BF members email me directly and I'll adjust the price a little more...
All except the 'hookers' come with a small (8mm) stainless split ring and the Brewtals come with a Dewalt phillips/flat hex drive screwdriver. We have a separate holder in the works that will be out soon. Anyone buying a Brewtal or already has one will get one for free if they contact me when ready.
The prices also include free shipping in the continental US or Armed Forces postal codes. International will be calculated at actual rate, contact me for those orders and we will get you invoiced.
You may order by emailing me directly eric@overmountain.us.com and I will send you a PayPal invoice.
-
Or (best option for single item orders) you can go to our website and use the coupon code BF5OFF with a minimum order of $15.
You can pay on the website via PayPal or with our CC merchant. Just add a note with desired finish. Web addy is Overmountain.us.com
**Free US shipping on anything in the store....
See my itrader rating for reviews of transactions and elsewhere on the web for endorsement of my items.
Legalese: I cannot know the laws in every jurisdiction. If you are purchasing a knuckle duster, know first if it is legal for you to carry and use. We will not be responsible for any actions, violations of the law, or personal property damage and injury resulting from the use of our devices. All are covered by our warranty viewable on our website. And all sales are final unless otherwise arranged by contacting OKT directly at my email address. These are last ditch items designed for use as such. Exercise caution with use and always train and prepare yourself with any weapon you carry. For more information visit my website. Thank you for your purchase!
-Eric
Overmountain Knife and Tool
Overmountain.us.com
Last edited:
