CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,704
Good Afternoon,
Here is the second of four blade shapes I designed for the new EDC style I have been working on. I made some adjustments to the sheath on this one. I Made the throat of the sheath deeper, lowered the cant angle, and went with a slimmer clip that works on fabric as well as a belt. I wore it around for a couple days before I put the edge on it to make sure its comfortable and draws well.
Its a small detail but I think it looks nice the way the sculpting on the integral guard flows into the bolster and the blade edge
This blade is made from 5/32" AEBL ground to 400 grit and finished on an ultra fine scotch brite belt. Handle is rosewood and copper hand sanded to 1500 grit. I used a brown micarta pin on the rosewood that blends in nicely.
The sheath is leather setup to be carried IWB on your left side for right hand crossdraw.
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 5/32" AEBL
Grind: Full Flat
Blade: 3 1/2"
Handle Material: Rosewood and copper
Overall Length: 8 5/8"
Sheath: Kydex with holes for a tek-lok
Weight: 4.4 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Here is the second of four blade shapes I designed for the new EDC style I have been working on. I made some adjustments to the sheath on this one. I Made the throat of the sheath deeper, lowered the cant angle, and went with a slimmer clip that works on fabric as well as a belt. I wore it around for a couple days before I put the edge on it to make sure its comfortable and draws well.
Its a small detail but I think it looks nice the way the sculpting on the integral guard flows into the bolster and the blade edge
This blade is made from 5/32" AEBL ground to 400 grit and finished on an ultra fine scotch brite belt. Handle is rosewood and copper hand sanded to 1500 grit. I used a brown micarta pin on the rosewood that blends in nicely.
The sheath is leather setup to be carried IWB on your left side for right hand crossdraw.
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 5/32" AEBL
Grind: Full Flat
Blade: 3 1/2"
Handle Material: Rosewood and copper
Overall Length: 8 5/8"
Sheath: Kydex with holes for a tek-lok
Weight: 4.4 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Last edited:
....