- Joined
- Apr 1, 2010
- Messages
- 3,273
Half Tang Jr. Wolverine in 3V
This piece of 3V was too big to throw away and too small for a full size knife. This is what materialized.
Held together with 5 pins and 2 Corby Bolts I can't imagine this knife ever coming apart.
I never carried this knife but it did get a bit of use around the house. Food prep, gardening, and tree trimming are a few of the uses it saw.
Specs:
.167" CPM 3V
9.45" OAL
4.65" Blade
Heat Treat to 61 Rc Tested with Sub-Zero quench
Flat Grind
Textured Flats
Convexed Edge with Secondary Bevel
Natural Linen Scales - Deeply Contoured and Insanely Comfortable
Black G10 Spacer
5 Natural Paper Micarta Pins
2 Stainless Corby Bolts
Large Tek-Lok Compatible Kydex
Asking $ SOLD
Magnum Hunter in PSF 27
These pictures are from when the knife was new. It was carried EDC by me from December to mid June.
The sheath shows some wear on the Kryptek Print and the blade has several scratches from the kydex, sharpening, and use.
Specs:
.135" PSF 27
10.13" OAL
5.47" Blade
High Flat Grind with Swedge
Thin Razor Sharp Cutting Edge
Tapered Tang
Black G10 Scales
Blue G10 Liners
Stainless Pins and Tube
Pancake Kydex Sheath with Typhoon Kryptek Camo
Large Tek-Lok Compatible
Asking $ SOLD
Hunter EDC in CPM 154
Specs:
.097" CPM 154
8.37" OAL
4.1" Blade
Hollow Ground on a 12" wheel
Heat Treat to 61 Rc by Peters
Black G10 Scales
Toxic Green Liners
Stainless Pins and Tube
Typhoon Kryptek Camo Kydex
Large Tek-Lok Compatible
Asking $ SOLD
Price includes shipping via USPS Priority Mail to all 50 states with delivery confirmation, others can contact for additional shipping charges
I accept Paypal, money order, or check. Paypal preferred to bigchriscustomknives@gmail.com.
First, "I'll take it," gets it.
Feel free to email any questions/comments to bigchriscustomknives@gmail.com.
Thanks for looking!
Big Chris
This piece of 3V was too big to throw away and too small for a full size knife. This is what materialized.
Held together with 5 pins and 2 Corby Bolts I can't imagine this knife ever coming apart.
I never carried this knife but it did get a bit of use around the house. Food prep, gardening, and tree trimming are a few of the uses it saw.
Specs:
.167" CPM 3V
9.45" OAL
4.65" Blade
Heat Treat to 61 Rc Tested with Sub-Zero quench
Flat Grind
Textured Flats
Convexed Edge with Secondary Bevel
Natural Linen Scales - Deeply Contoured and Insanely Comfortable
Black G10 Spacer
5 Natural Paper Micarta Pins
2 Stainless Corby Bolts
Large Tek-Lok Compatible Kydex
Asking $ SOLD
Magnum Hunter in PSF 27
These pictures are from when the knife was new. It was carried EDC by me from December to mid June.
The sheath shows some wear on the Kryptek Print and the blade has several scratches from the kydex, sharpening, and use.
Specs:
.135" PSF 27
10.13" OAL
5.47" Blade
High Flat Grind with Swedge
Thin Razor Sharp Cutting Edge
Tapered Tang
Black G10 Scales
Blue G10 Liners
Stainless Pins and Tube
Pancake Kydex Sheath with Typhoon Kryptek Camo
Large Tek-Lok Compatible
Asking $ SOLD
Hunter EDC in CPM 154
Specs:
.097" CPM 154
8.37" OAL
4.1" Blade
Hollow Ground on a 12" wheel
Heat Treat to 61 Rc by Peters
Black G10 Scales
Toxic Green Liners
Stainless Pins and Tube
Typhoon Kryptek Camo Kydex
Large Tek-Lok Compatible
Asking $ SOLD
Price includes shipping via USPS Priority Mail to all 50 states with delivery confirmation, others can contact for additional shipping charges
I accept Paypal, money order, or check. Paypal preferred to bigchriscustomknives@gmail.com.
First, "I'll take it," gets it.
Feel free to email any questions/comments to bigchriscustomknives@gmail.com.
Thanks for looking!
Big Chris
Last edited:
