All knives are as received from makers and in perfect condition. Additional pics available on request.
Wayne Jarrett Damascus Stigma - $200
SPECS
OAL: 7 1/2
Blade: 3 1/8 Flat Grind; razor sharp; 1/8 at ricasso with tapered tang
Blade Steel: Craig Barr Gator Pattern Damascus - See Note*; 1095 & 15N20; Deep etched and polished
File Work: N/A
Handle: Stabilized red Amboina burl with brass liners
Bolsters: Desert Ironwood Burl
Pins: ¼ Mosaic in handle; 1/8 brass in bolster
Sheath: : 6-7oz Premium tooling leather by maker in my two-tone, black border, med. Brown body for right hand carry.
Note* - Craig has been busy making his Damascus hawk heads so there haven't been many of his premium Damascus billets readily available ...and he's getting a very pretty penny for it when you special order it. I've had this billet for quite a while waiting for just the right combination of materials. In other words, I couldn't duplicate this knife now and sell it for the same price. If you don't own a knife with Craigs 'mascus, you're missing out.
Wayne is a member of the Professional Knifemakers Association. Unfortunately, I dont believe Wayne is making knives anymore his site isnt around and he hasnt posted on BF in some time. Great knife from a terrific maker and human being. CJ Bull apprenticed under Wayne so he might be able to provide a comment. Dont miss out on this one.
Mike Turner Drop Point Hunter in ATS-34 - $225
Blade is ATS-34 with a tapered tang, hand rubbed to 800 grit, Stainless steel bolsters. Scales are stabilized maple burl with stainless steel pins and thong tube.
Blade is 4 1/2" tip to guard, blade width is 1 3/8" and is 3/16" thick, handle is 5 1/8" long and is 9 5/8" overall in length. Custom sheath made by Sally Martin. This knife is super sharp I made the mistake of contacting my finger while I was unwrapping it and received a nice injury for my trouble.
Mike Turner Trailing Point Hunter - $225
Blade is ATS-34 hand rubbed to 800 grit. Blade is 4 5/8" from tip to bolster and is 1 3/16" wide and is 3/16" thick. Handle is 4 1/2" long from front of bolster to the end of the handle. Overall is 9 1/4" long.
Bolsters are 304 stainless and has Sally Martin mosaic pins. Scales are K&G stabilized California Buckeye Burl. With hand tooled leather sheath.
ONeill A-2 Fighter $185
Steel- 3/16 , A-2 tool steel . H.T. with deep cyro freeze in my shop to an Rc. 60-61
Grind - Flat ground , scotch bright belt machine satin finished on bevel grind
O.A.L - 11" , blade - tip to guard is 6-1/8"
Sharpened edge is scary at 5-3/4"
Max blade width is 1-1/4"
furniture - nickle silver hilt/guard and S.S. pins
Handle - green canvas micarta with black liners
With leather sheath.
CJ Bull Drop Point - Cascavel - $200
OAL: 8 1/4
Blade: 3 3/4 Flat Ground
Blade Steel: 1095 High Carbon Ste,el; RC59
File Work: Full Spine in Vine & Thorn
Handle: From front to back Maple Burl; Sapele Pomele; Horistes Burl; Purpleheart; Jigged Buffalo; Concinna Burl.
Bolsters: N/A
Pins: 416 Stainless Steel
Sheath: : 6-7oz Premium tooling leather to be made to buyers specs for right hand carry
Salem Straub - Forged, clay quenched, slow drop point hunter w/cocobolo $175
Forged, full tapered tang slow drop point hunter, flat ground with distal taper. Blade is heavy coil spring from a GT Mustang - clay quenched and tempered with a nice visible temperline.
Scales are cocobolo, with SS bolsters, pins and thong tube. Handle is contoured to fit the hand well, with a definite palm swell. Overall length on this one is 10, blade is 5-3/8 from point to bolster at choil area is 5-3/8. Right hand leather sheath included.
SNODYS Two (2) Custom Snody Menaces - Price $425 EACH
Snody Stainless Damascus Menace Mike Norris Stainless Damascus One Hornets Nest and One Gator Skin - 3.5" Blade Length, 7" Overall Length, Double Hollow Grind, Double Swege, Nice Satin Finish, Pro Heat Treat and Cryo, Aerospace Carbon Fiber // World Class Quality, Stainless Steel Blind Bolt Fasteners. NOTE THESE WERE HADE MADE BY MIKE IN HIS TEXAS SHOP - $425 EACH
ALL prices include PayPal fees, shipping (CONUS ONLY) and insurance - NO TRADES PLEASE!!! PM me or email me at barzo@cox.net - first "I'll take it" in this thread will get the knife - THANKS !!!
I reserve the right to refuse to sell to anybody based on anything.
Wayne Jarrett Damascus Stigma - $200
SPECS
OAL: 7 1/2
Blade: 3 1/8 Flat Grind; razor sharp; 1/8 at ricasso with tapered tang
Blade Steel: Craig Barr Gator Pattern Damascus - See Note*; 1095 & 15N20; Deep etched and polished
File Work: N/A
Handle: Stabilized red Amboina burl with brass liners
Bolsters: Desert Ironwood Burl
Pins: ¼ Mosaic in handle; 1/8 brass in bolster
Sheath: : 6-7oz Premium tooling leather by maker in my two-tone, black border, med. Brown body for right hand carry.
Note* - Craig has been busy making his Damascus hawk heads so there haven't been many of his premium Damascus billets readily available ...and he's getting a very pretty penny for it when you special order it. I've had this billet for quite a while waiting for just the right combination of materials. In other words, I couldn't duplicate this knife now and sell it for the same price. If you don't own a knife with Craigs 'mascus, you're missing out.
Wayne is a member of the Professional Knifemakers Association. Unfortunately, I dont believe Wayne is making knives anymore his site isnt around and he hasnt posted on BF in some time. Great knife from a terrific maker and human being. CJ Bull apprenticed under Wayne so he might be able to provide a comment. Dont miss out on this one.
Mike Turner Drop Point Hunter in ATS-34 - $225
Blade is ATS-34 with a tapered tang, hand rubbed to 800 grit, Stainless steel bolsters. Scales are stabilized maple burl with stainless steel pins and thong tube.
Blade is 4 1/2" tip to guard, blade width is 1 3/8" and is 3/16" thick, handle is 5 1/8" long and is 9 5/8" overall in length. Custom sheath made by Sally Martin. This knife is super sharp I made the mistake of contacting my finger while I was unwrapping it and received a nice injury for my trouble.
Mike Turner Trailing Point Hunter - $225
Blade is ATS-34 hand rubbed to 800 grit. Blade is 4 5/8" from tip to bolster and is 1 3/16" wide and is 3/16" thick. Handle is 4 1/2" long from front of bolster to the end of the handle. Overall is 9 1/4" long.
Bolsters are 304 stainless and has Sally Martin mosaic pins. Scales are K&G stabilized California Buckeye Burl. With hand tooled leather sheath.
ONeill A-2 Fighter $185
Steel- 3/16 , A-2 tool steel . H.T. with deep cyro freeze in my shop to an Rc. 60-61
Grind - Flat ground , scotch bright belt machine satin finished on bevel grind
O.A.L - 11" , blade - tip to guard is 6-1/8"
Sharpened edge is scary at 5-3/4"
Max blade width is 1-1/4"
furniture - nickle silver hilt/guard and S.S. pins
Handle - green canvas micarta with black liners
With leather sheath.
CJ Bull Drop Point - Cascavel - $200
OAL: 8 1/4
Blade: 3 3/4 Flat Ground
Blade Steel: 1095 High Carbon Ste,el; RC59
File Work: Full Spine in Vine & Thorn
Handle: From front to back Maple Burl; Sapele Pomele; Horistes Burl; Purpleheart; Jigged Buffalo; Concinna Burl.
Bolsters: N/A
Pins: 416 Stainless Steel
Sheath: : 6-7oz Premium tooling leather to be made to buyers specs for right hand carry
Salem Straub - Forged, clay quenched, slow drop point hunter w/cocobolo $175
Forged, full tapered tang slow drop point hunter, flat ground with distal taper. Blade is heavy coil spring from a GT Mustang - clay quenched and tempered with a nice visible temperline.
Scales are cocobolo, with SS bolsters, pins and thong tube. Handle is contoured to fit the hand well, with a definite palm swell. Overall length on this one is 10, blade is 5-3/8 from point to bolster at choil area is 5-3/8. Right hand leather sheath included.
SNODYS Two (2) Custom Snody Menaces - Price $425 EACH
Snody Stainless Damascus Menace Mike Norris Stainless Damascus One Hornets Nest and One Gator Skin - 3.5" Blade Length, 7" Overall Length, Double Hollow Grind, Double Swege, Nice Satin Finish, Pro Heat Treat and Cryo, Aerospace Carbon Fiber // World Class Quality, Stainless Steel Blind Bolt Fasteners. NOTE THESE WERE HADE MADE BY MIKE IN HIS TEXAS SHOP - $425 EACH
ALL prices include PayPal fees, shipping (CONUS ONLY) and insurance - NO TRADES PLEASE!!! PM me or email me at barzo@cox.net - first "I'll take it" in this thread will get the knife - THANKS !!!
I reserve the right to refuse to sell to anybody based on anything.