Photos: http://s112.photobucket.com/user/tiburonAZ/slideshow/Benchmades%20and%20Emersons
These have been in my collection gathering dust for way too long...
Emerson
SOLD to BTK-Folding Karambit. 2006 production with black blade. I may have carried this a couple of times when I first received it. At the most it cut some tape or opened a box. The edge is original and very sharp and there are zero blade play issues. There are a few storage/handling marks. Has correct box. $180 and price includes priority shipping via USPS in U.S..
24-hour HOLD -Folding Karambit, 2006 production with black blade. This has been pocket carried but seen very little actual use. At the most it cut some tape or opened a box. The edge is original and very sharp and there are zero blade play issues. There is wear on pocket clip and pivot screw consistent with pocket carry. No box. $160 and price includes priority shipping via USPS in U.S..
WITHDRAWN -Fixed blade Karambit, 2006 production with black blade. I may have clipped this on my belt a couple of times when I first received it. At the most it cut some tape or opened a box. The edge is original and very sharp. No box. $225 and price includes priority shipping via USPS in U.S..
-Fred Perrin neck knife, 2005 production with black blade. I may have cut some tape or opened a box with this knife. The edge is original and very sharp. There are sheath insertion marks on the blade. Has correct box. $105 and price includes priority shipping via USPS in U.S..
Benchmades
-705SBT-04 limited edition with D2 blade steel and olive green scales with rubber inserts. Very lightly used with some light wear on the pocket clip. The edge is original and very sharp and there are zero blade play issues. Comes with correct box which is serialized to the knife (028/250). $185 and price includes priority shipping via USPS in U.S..
-Nimravus with G-10 handles. I may have used it to cut some tape or opened a box. The edge is original and very sharp. A few sheath insertion marks on the blade. No box. $130 and price includes priority shipping via USPS in U.S..
-Nimravus Tanto with G-10 handles (kryloned desert tan). I may have used it to cut some tape or opened a box. The edge is original and very sharp. A few sheath insertion marks on the blade. No box. $130 and price includes priority shipping via USPS in U.S..
-Nimravus Benchmade factory kydex sheath (fits both knives). $25 (Just $10 with purchase of either knife!) and price includes priority shipping via USPS in U.S..
-Nimravus Cub, rare factory satin blade with 440c steel and G-10 handles. These were the only Nimravus models with a factory satin finish. I may have used it to cut some tape or opened a box. The edge is original and very sharp. Has correct box. $225 and price includes priority shipping via USPS in U.S..
-Nimravus Cub Benchmade factory kydex sheath. $25 (Just $10 with purchase of the knife!) and price includes priority shipping via USPS in U.S..
-Nimravus Cub Onscene Tactical custom kydex sheath. $25 (Just $10 with purchase of the knife!) and price includes priority shipping via USPS in U.S..
=USPS MO for payment please.
=If I know you, your personal check is fine.
=If you have good rep on Bladeforums (10 or more positive feedback and no negative issues on previous transactions) we can work out PP if you cover the fees.
=I am going to keep this sale restricted to the U.S. unless we have had a previous worry-free transaction
Photos: http://s112.photobucket.com/user/tiburonAZ/slideshow/Benchmades%20and%20Emersons
============================================================================================
My trade interests are very limited. I will trade up or down in value and I am happy to combine multiple knives or add cash for higher value trades:
Custom Bowie knife with 8" to 12" blade (My interest will depend on the maker and design)
Spyderco Chinook 2 or 3
Winchester 1200 stainless police 12 ga (early 1980's hard chrome or chrome finish)
EOTECH 512 (A lightly used safe-queen is fine)
RMJ Storm Crow
Scrap Yard 1311 in sage/tan (if it exists)
Scrap Yard 1111 in sage/tan
Scrap Yard 911 in sage/tan
Busse Skinny ASH (pumpkin handles only)
Busse large ringed BARF
Busse large Cali legal BARF
Busse Battle Pappy
Busse Basic 5, 7 or 9 in tan (if they exist)
Winkler Jungle II (curly maple)
Winkler Boontac (curly maple)
Other Winklers may be of interest-wood handles preferred
S&W model 617 with 4" barrel (pre lock)
Benchmade AFCK large with satin blade (800S-others considered)
Smith and Wesson wood grips (various K frame both round and square butt)
Valmet 71/76 magazines (.223)
Sig P226 9mm mags-"dove tail" hi-caps (unused only)
HERA HK USC 20rd magazine
Wilson ETM 1911 mags .45 cal 8 rounders (unused only)
A member without significant feedback (10 or more positive feedback and no negative issues on previous transactions) is respectfully requested to send his/her end of a trade first.
These have been in my collection gathering dust for way too long...
Emerson
SOLD to BTK-Folding Karambit. 2006 production with black blade. I may have carried this a couple of times when I first received it. At the most it cut some tape or opened a box. The edge is original and very sharp and there are zero blade play issues. There are a few storage/handling marks. Has correct box. $180 and price includes priority shipping via USPS in U.S..
24-hour HOLD -Folding Karambit, 2006 production with black blade. This has been pocket carried but seen very little actual use. At the most it cut some tape or opened a box. The edge is original and very sharp and there are zero blade play issues. There is wear on pocket clip and pivot screw consistent with pocket carry. No box. $160 and price includes priority shipping via USPS in U.S..
WITHDRAWN -Fixed blade Karambit, 2006 production with black blade. I may have clipped this on my belt a couple of times when I first received it. At the most it cut some tape or opened a box. The edge is original and very sharp. No box. $225 and price includes priority shipping via USPS in U.S..
-Fred Perrin neck knife, 2005 production with black blade. I may have cut some tape or opened a box with this knife. The edge is original and very sharp. There are sheath insertion marks on the blade. Has correct box. $105 and price includes priority shipping via USPS in U.S..
Benchmades
-705SBT-04 limited edition with D2 blade steel and olive green scales with rubber inserts. Very lightly used with some light wear on the pocket clip. The edge is original and very sharp and there are zero blade play issues. Comes with correct box which is serialized to the knife (028/250). $185 and price includes priority shipping via USPS in U.S..
-Nimravus with G-10 handles. I may have used it to cut some tape or opened a box. The edge is original and very sharp. A few sheath insertion marks on the blade. No box. $130 and price includes priority shipping via USPS in U.S..
-Nimravus Tanto with G-10 handles (kryloned desert tan). I may have used it to cut some tape or opened a box. The edge is original and very sharp. A few sheath insertion marks on the blade. No box. $130 and price includes priority shipping via USPS in U.S..
-Nimravus Benchmade factory kydex sheath (fits both knives). $25 (Just $10 with purchase of either knife!) and price includes priority shipping via USPS in U.S..
-Nimravus Cub, rare factory satin blade with 440c steel and G-10 handles. These were the only Nimravus models with a factory satin finish. I may have used it to cut some tape or opened a box. The edge is original and very sharp. Has correct box. $225 and price includes priority shipping via USPS in U.S..
-Nimravus Cub Benchmade factory kydex sheath. $25 (Just $10 with purchase of the knife!) and price includes priority shipping via USPS in U.S..
-Nimravus Cub Onscene Tactical custom kydex sheath. $25 (Just $10 with purchase of the knife!) and price includes priority shipping via USPS in U.S..
=USPS MO for payment please.
=If I know you, your personal check is fine.
=If you have good rep on Bladeforums (10 or more positive feedback and no negative issues on previous transactions) we can work out PP if you cover the fees.
=I am going to keep this sale restricted to the U.S. unless we have had a previous worry-free transaction
Photos: http://s112.photobucket.com/user/tiburonAZ/slideshow/Benchmades%20and%20Emersons
============================================================================================
My trade interests are very limited. I will trade up or down in value and I am happy to combine multiple knives or add cash for higher value trades:
Custom Bowie knife with 8" to 12" blade (My interest will depend on the maker and design)
Spyderco Chinook 2 or 3
Winchester 1200 stainless police 12 ga (early 1980's hard chrome or chrome finish)
EOTECH 512 (A lightly used safe-queen is fine)
RMJ Storm Crow
Scrap Yard 1311 in sage/tan (if it exists)
Scrap Yard 1111 in sage/tan
Scrap Yard 911 in sage/tan
Busse Skinny ASH (pumpkin handles only)
Busse large ringed BARF
Busse large Cali legal BARF
Busse Battle Pappy
Busse Basic 5, 7 or 9 in tan (if they exist)
Winkler Jungle II (curly maple)
Winkler Boontac (curly maple)
Other Winklers may be of interest-wood handles preferred
S&W model 617 with 4" barrel (pre lock)
Benchmade AFCK large with satin blade (800S-others considered)
Smith and Wesson wood grips (various K frame both round and square butt)
Valmet 71/76 magazines (.223)
Sig P226 9mm mags-"dove tail" hi-caps (unused only)
HERA HK USC 20rd magazine
Wilson ETM 1911 mags .45 cal 8 rounders (unused only)
A member without significant feedback (10 or more positive feedback and no negative issues on previous transactions) is respectfully requested to send his/her end of a trade first.
Last edited: