- Joined
- Oct 24, 2011
- Messages
- 121
Custom Ernie Emerson A-100>>>> $800
This is a user; lots of light scratches on the blade and scuffs on the bolsters. Has been re-sharpened on a wicked edge. It would appear as though the pocket clip screws have been swapped out for aftermarket torx screws, although a quick call to EKI and they can hook you up with some proprietary ones. Centering is good, lockup is solid. Comes with a zipper pouch and a pair of phosphor bronze washers.Size: 3 9/16" Blade; 8 3/8" OAL Comes with original thumb stud and a monster custom Grey Precision thumb stud and a regular custom Grey Precision thumb stud.
Custom Ernie Emerson Viper (MV-1) MINT and very rare>>>> $ 1450.00
This knife is mint in every way!!!!!!!!!! Frame: Titanium, Handles: Green micarta, Titanium Liner Lock, Blade Length: 3 1/4″, Overall Length: 7 1/2″
Ernie has called the Viper 1 the grandfather of all of his tactical designs. In looking at the lines you can see the lineage of the famous CQC-6. This custom has a double grind with an upper swedge grind and has the razor sharp factory edge on the edge side. The MV-1 currently has a custom Grey Precision thumb stud comes with original Emerson thumb stud and a monster custom Grey Precision thumb stud and a regular custom Grey Precision thumb stud.. Includes original box and warranty card!
All the Viper Models have all been discontinued by Ernie....
Retirement of Viper Series
Tuesday, November 5, 2013
I am announcing the retirement of the Viper series of Emerson custom knives also called the MV Line. Those knives are the: MV1, MV2, MV3, MV4, and MV5 models. They were my first hard use, hand finish versions of Tacticals I built over 25 years ago. I have so many more new designs that in order to make room for them I had to Thin the herd. They were all great knife designs and I built the foundations of my Tactical career upon them. I am sorry to see them go but I am not going to be building anymore of them.
- Ernest R. Emerson
Sheepdog Knives PPM Prototype>>>>$350
I purchased this directly from a guy who purchased it directly from Chris. 3/16" thick 3" 1095 steel with hamon. Blade is 4" overall. Mokuti insert, backspace and pocket clip. She rides on caged bearings and flips pretty good. Very smooth. The bevel is a little uneven on the presentation side of the blade which should be visible in the pic. Overall, this knife is pretty great. Very well balanced and compact but doesn't feel too small. Small hairline carry marks on handles.
The First "I will take it" followed by PM and prompt payment gets it!!!! No trades
All include PayPal fees and USPS insured priority shipping anywhere in the CONUSA!!!
Thanks for Looking,
Mark GSG9 Specialist
This is a user; lots of light scratches on the blade and scuffs on the bolsters. Has been re-sharpened on a wicked edge. It would appear as though the pocket clip screws have been swapped out for aftermarket torx screws, although a quick call to EKI and they can hook you up with some proprietary ones. Centering is good, lockup is solid. Comes with a zipper pouch and a pair of phosphor bronze washers.Size: 3 9/16" Blade; 8 3/8" OAL Comes with original thumb stud and a monster custom Grey Precision thumb stud and a regular custom Grey Precision thumb stud.
Custom Ernie Emerson Viper (MV-1) MINT and very rare>>>> $ 1450.00
This knife is mint in every way!!!!!!!!!! Frame: Titanium, Handles: Green micarta, Titanium Liner Lock, Blade Length: 3 1/4″, Overall Length: 7 1/2″
Ernie has called the Viper 1 the grandfather of all of his tactical designs. In looking at the lines you can see the lineage of the famous CQC-6. This custom has a double grind with an upper swedge grind and has the razor sharp factory edge on the edge side. The MV-1 currently has a custom Grey Precision thumb stud comes with original Emerson thumb stud and a monster custom Grey Precision thumb stud and a regular custom Grey Precision thumb stud.. Includes original box and warranty card!
All the Viper Models have all been discontinued by Ernie....
Retirement of Viper Series
Tuesday, November 5, 2013
I am announcing the retirement of the Viper series of Emerson custom knives also called the MV Line. Those knives are the: MV1, MV2, MV3, MV4, and MV5 models. They were my first hard use, hand finish versions of Tacticals I built over 25 years ago. I have so many more new designs that in order to make room for them I had to Thin the herd. They were all great knife designs and I built the foundations of my Tactical career upon them. I am sorry to see them go but I am not going to be building anymore of them.
- Ernest R. Emerson
Sheepdog Knives PPM Prototype>>>>$350
I purchased this directly from a guy who purchased it directly from Chris. 3/16" thick 3" 1095 steel with hamon. Blade is 4" overall. Mokuti insert, backspace and pocket clip. She rides on caged bearings and flips pretty good. Very smooth. The bevel is a little uneven on the presentation side of the blade which should be visible in the pic. Overall, this knife is pretty great. Very well balanced and compact but doesn't feel too small. Small hairline carry marks on handles.
The First "I will take it" followed by PM and prompt payment gets it!!!! No trades
All include PayPal fees and USPS insured priority shipping anywhere in the CONUSA!!!
Thanks for Looking,
Mark GSG9 Specialist
Last edited: