- Joined
- Jul 23, 2015
- Messages
- 17,089
Two small knives perfect for neck, pocket, or belt carry, in the tough and fine grained 15N20 carbon steel. I wear a neck knife I made in this steel myself, in the heat, in the rain, and even during hard bicycle rides, and I have yet to see a post of rust on it. These is the large variant of my ultralight necker platform which is designed to be slim and unobtrusive, while sporting enough blade length to do most common EDC tasks, and enough handle for all but the sasquatches among us to get a solid four finger grip, without the need for a fob.
Both knives feature freehand textured wood scales, file work for weight reduction, and hand cut jimping where each groove was individually cut, and holstex sheaths with excellent retention. Both are thin and sharp like you expect a custom knife should be.
When I started making knives as a hobby in 2015 it was initially in the pursuit of my own perfect neck/EDC knife to carry, since I had a hard time getting any maker to work with me. Well I'm glad these knives were not available back then, because if they had been, I most likely would not be a knife maker today. I've priced these too low for all the time and care I put into them. Grab them before I change my mind!
Spear Point
Specs
Steel: .120" 15N20, 61 RC
Geometry: Full flatvex, <.005" behind the edge, up to .008" at the tip
Overall Length: Just over 6 1/2"
Cutting Edge Length: 2 7/8"
Weight: 1.6 oz., 2.3 oz. with sheath
Handle: Freehand textured bocote
Sheath: Tan raptor skin Holstex taco sheath included, compatible with Tek-locks and most adjustable clips on the market.
Price is expired, payable via itemized PayPal invoice, which I will send to your specified email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms by PM or email (ie send me the email address you want the invoice sent to) gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $25 per extra item.
Pseudo Clip Point - SOLD
Specs
Steel: .120" 15N20, 61 RC
Geometry: Full flatvex, <.005" behind the edge
Overall Length: Just over 6 1/2"
Cutting Edge Length: 2 7/8"
Weight: 1.5 oz., 2.2 oz. with sheath
Handle: Freehand textured bocote
Sheath: Tan raptor skin Holstex taco sheath included, compatible with Tek-locks and most adjustable clips on the market.
Price is expired, payable via itemized PayPal invoice, which I will send to your specified email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms by PM or email (ie send me the email address you want the invoice sent to) gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $25 per extra item.
Thanks for looking!
Both knives feature freehand textured wood scales, file work for weight reduction, and hand cut jimping where each groove was individually cut, and holstex sheaths with excellent retention. Both are thin and sharp like you expect a custom knife should be.
When I started making knives as a hobby in 2015 it was initially in the pursuit of my own perfect neck/EDC knife to carry, since I had a hard time getting any maker to work with me. Well I'm glad these knives were not available back then, because if they had been, I most likely would not be a knife maker today. I've priced these too low for all the time and care I put into them. Grab them before I change my mind!
Spear Point
Specs
Steel: .120" 15N20, 61 RC
Geometry: Full flatvex, <.005" behind the edge, up to .008" at the tip
Overall Length: Just over 6 1/2"
Cutting Edge Length: 2 7/8"
Weight: 1.6 oz., 2.3 oz. with sheath
Handle: Freehand textured bocote
Sheath: Tan raptor skin Holstex taco sheath included, compatible with Tek-locks and most adjustable clips on the market.
Holstex is a thermoplastic like Kydex, but with an artistic design molded into the outer surface. It has the same durability and resistance to the elements as Kydex.
Price is expired, payable via itemized PayPal invoice, which I will send to your specified email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms by PM or email (ie send me the email address you want the invoice sent to) gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $25 per extra item.
Pseudo Clip Point - SOLD
Specs
Steel: .120" 15N20, 61 RC
Geometry: Full flatvex, <.005" behind the edge
Overall Length: Just over 6 1/2"
Cutting Edge Length: 2 7/8"
Weight: 1.5 oz., 2.2 oz. with sheath
Handle: Freehand textured bocote
Sheath: Tan raptor skin Holstex taco sheath included, compatible with Tek-locks and most adjustable clips on the market.
Holstex is a thermoplastic like Kydex, but with an artistic design molded into the outer surface. It has the same durability and resistance to the elements as Kydex.
Price is expired, payable via itemized PayPal invoice, which I will send to your specified email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms by PM or email (ie send me the email address you want the invoice sent to) gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $25 per extra item.
Thanks for looking!
Last edited:
