ENDED - AEB-L EDC Fixed Blades - Good variety

David Mary

David Mary

pass the mustard - after you cut it
Moderator
Knifemaker / Craftsman / Service Provider
Feedback: +135 / =0 / -0
Joined
Jul 23, 2015
Messages
17,108
Good evening friends! Here are my latest offerings in the interest of bringing you comfort, efficiency and enjoyment in your cutting tasks.


SOLD - EDC Wharncliffe

Specs
Steel: 1/8" AEB-L, 61-62 RC

Geometry: Full flat grind, .008" behind the edge

Overall Length: 7.5"
Cutting Edge Length: 3.75"

Weight: 3.9 oz

Handle: Resin/G10/Suretouch - the read part of the scale is grey and black G10 on the show side and all black Suretouch on the opposite side - adhesive is water resistant, but do not leave the knife submerged or wash in dishwasher.

Sheath: Black Boltaron taco sheath included

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7444.JPG
IMG_7445.JPG
IMG_7446.JPG
IMG_7447.JPG
IMG_7448.JPG
IMG_7449.JPG
IMG_7451.JPG
 
Last edited:
EDC Hawkbill

Specs
Steel: 3/32" AEB-L, 61-62 RC

Geometry: Flat-vex, beginning .016" at the heel, increasing to .024" at the tip for a good balance of cutting ability and tip strength.

Overall Length: 7"
Cutting Edge Length: 2.9"

Weight: 2.5 oz

Handle: All G10 with hand texture added for grip and weight reduction, and special care to also make it comfortable in all grips. Waterproof adhesive.

Sheath: Black Boltaron taco sheath included

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7453.JPG
IMG_7454.JPG
IMG_7456.JPG
IMG_7457.JPG
IMG_7457.JPG
IMG_7458.JPG
IMG_7459.JPG
IMG_7460.JPG
IMG_7461.JPG
 
Last edited:
Gent's EDC Seax

Specs
Steel: 3/32" AEB-L, 61-62 RC

Geometry: Flat-vex grind, .012" behind the edge

Overall Length: 7.25"
Cutting Edge Length: 3"

Weight: 1.9 oz

Handle: Micarta/G10/Kirinte, stainless steel tubes - adhesive is water resistant, but do not leave the knife submerged or wash in dishwasher.

Sheath: Black Boltaron taco sheath included

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7463.JPG
IMG_7464.JPG
IMG_7465.JPG
IMG_7466.JPG
IMG_7467.JPG
IMG_7469.JPG
IMG_7470.JPG
IMG_7471.JPG
 
Last edited:
SOLD - EDC/Pruning/Paring Knife

Specs
Steel: 3/32" AEB-L, 61-62 RC

Geometry: Flat-vex .008" at the heel, up to .020" at the tip for a balance of cutting ability and tip strength.

Overall Length: 6.75"
Cutting Edge Length: 2.75"

Weight: 2.6 oz

Handle: Micarta, constructed with waterproof adhesive.

Sheath: Black Boltaron taco sheath included

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7473.JPG
IMG_7474.JPG
IMG_7475.JPG
IMG_7476.JPG
IMG_7477.JPG
IMG_7478.JPG
IMG_7479.JPG
 
Last edited:
SOLD - Ultra Slim Necker

Specs
Steel: 3/32" AEB-L, 61-62 RC

Geometry: Full flat grind, .008" at the heel up to .025" at the tip for a balance of cutting ability and tip strength.

Overall Length: 7.25"
Cutting Edge Length: 3.125"

Weight: 1.7 oz

Handle: Orange textured G10 and blue G10 liners, stainless steel pins, waterproof adhesive.

Sheath: Orange Kydex taco sheath included.

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7481.JPG
IMG_7482.JPG
IMG_7483.JPG
IMG_7484.JPG
IMG_7485.JPG
IMG_7486.JPG
IMG_7487.JPG
 
Last edited:
SOLD - Ultraslim Spearpoint Necker

Specs
Steel: 3/32" AEB-L, 61-62 RC

Geometry: Flat-vex, ~.016" behind the edge

Overall Length: 7"
Cutting Edge Length: 3"

Weight: 2.1 oz

Handle: G10 up front, Suretouch at rear, stainless steel tubes - adhesive is water resistant, but do not leave the knife submerged or wash in dishwasher.

Sheath: Black Boltaron taco sheath included

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7497.JPG
IMG_7498.JPG
IMG_7499.JPG
IMG_7500.JPG
IMG_7501.JPG
IMG_7502.JPG
IMG_7503.JPG
 
Last edited:
SOLD - EDC Slicer

Specs
Steel: 3/32" AEB-L, 61-62 RC

Geometry: Flat-vex, ~.012" behind the edge

Overall Length: 7.25"
Cutting Edge Length: 3"

Weight: 3.7 oz

Handle: All G10 - adhesive is water resistant, but do not leave the knife submerged or wash in dishwasher.

Sheath: Black Boltaron taco sheath included.

Price expired, payable via itemized PayPal invoice, which I will send to your email address. Includes tracked and insured expedited North America shipping. I will ship internationally at buyer's expense and liability. First "I'll take it" with comms gets priority. My email address is in my sig if you turn your phone sideways. Combined shipping saves $15 per extra item.

IMG_7505.JPG
IMG_7506.JPG
IMG_7507.JPG
IMG_7508.JPG
IMG_7509.JPG
IMG_7510.JPG
IMG_7511.JPG
 
Last edited:
Boy David you have a wonderful selection of blades here. Trying to be good as that hawkbill is coming up soon. Have a good sale Sir and I’ll be on the watch for them to get back from heat treat.😉
 
Flatsman007 said:
Seconds on the ultra slim necker please.
Click to expand...

I truly appreciate your interest in my work. The orange Ultraslim necker has already sold. The spearpoint necker will have largely the same capabilities.
 
Hashishiin Hashishiin invoice sent, and your email also just showed up. Will reply momentarily.
 
You must log in or register to reply here.
Back
Top