This probably won't go anywhere but you never know. I am willing to ship this guitar as big a pain in the butt as that will be. But it'd have to be the right trade. More pictures can be taken if there is serious interest.
Have a limited edition Brendon Small Thunderhorse Explorer here. It has been heavily upgraded and improved over factory spec. First the frets have all been professionally dressed and leveled to ensure proper playability. The pots were replaced with quality Emerson pots in Master Volume, Tone, Tone configuration. The bridge and tailpiece were replaced with Faber machined pieces in nickel with titanium saddles which increased the instruments sustain and responsiveness. Switchcraft switch and a new output jack and jackplate were added. And lastly the pickups were replaced with Seymour Duncan P-Rails with triple shot switching rings. So you can switch between Single Coil, P90, Humbucker in Series, Humbucker in Parallel, right at the pickup. This is why each pickup has its own tone control. The amount of tones this guitar can create go from the twangiest country, to fire breathing metal, to warm smooth jazz. All Mahogany body and neck. Comes with a Metalocalypse gigbag. This is a Korean import yes... but it has higher quality electronics and hardware now than $2k American Gibsons. Condition over all is very good. The guitar has a few scratches and wear marks. But nothing major and certainly nothing that interferes with its function.
I have like 15 guitars and as much as I love the look of the Explorer... I just do not get along with Gibson style bridges and neck angles. I am a Fender guy to the bone. So I wanna move this out to someone that will just love it. So I'm open to trades.
1. More than anything I'd like to trade for a quality sword. Like a Busse Kensei, Maybe something nice from Zombie Tools, or Miller Bros, ect. Mainly interested in single edge japanese influenced designs. But also interested in gladius style and two handed European Style. Will also consider higher end Hanwei and Dynasty Forge Swords and the like.
2. Japanese Influenced blades. Tanto style ito wrapped knives akin to the Hartsfield style but I do prefer double grind rather that chisel. However I will consider something nice in a chisel grind.
3. Quality blades in general. I am on a bit of an old school Cold Steel kick at the moment so if you have older Tantos, Carbon V classics, Tai Pan, ect. But also interested in a large Strider folder like an SMF or AR, Microtechs, Large Busses, MMHW, Customs.
4. Maybe an Ipad Pro?
Have a limited edition Brendon Small Thunderhorse Explorer here. It has been heavily upgraded and improved over factory spec. First the frets have all been professionally dressed and leveled to ensure proper playability. The pots were replaced with quality Emerson pots in Master Volume, Tone, Tone configuration. The bridge and tailpiece were replaced with Faber machined pieces in nickel with titanium saddles which increased the instruments sustain and responsiveness. Switchcraft switch and a new output jack and jackplate were added. And lastly the pickups were replaced with Seymour Duncan P-Rails with triple shot switching rings. So you can switch between Single Coil, P90, Humbucker in Series, Humbucker in Parallel, right at the pickup. This is why each pickup has its own tone control. The amount of tones this guitar can create go from the twangiest country, to fire breathing metal, to warm smooth jazz. All Mahogany body and neck. Comes with a Metalocalypse gigbag. This is a Korean import yes... but it has higher quality electronics and hardware now than $2k American Gibsons. Condition over all is very good. The guitar has a few scratches and wear marks. But nothing major and certainly nothing that interferes with its function.
I have like 15 guitars and as much as I love the look of the Explorer... I just do not get along with Gibson style bridges and neck angles. I am a Fender guy to the bone. So I wanna move this out to someone that will just love it. So I'm open to trades.
1. More than anything I'd like to trade for a quality sword. Like a Busse Kensei, Maybe something nice from Zombie Tools, or Miller Bros, ect. Mainly interested in single edge japanese influenced designs. But also interested in gladius style and two handed European Style. Will also consider higher end Hanwei and Dynasty Forge Swords and the like.
2. Japanese Influenced blades. Tanto style ito wrapped knives akin to the Hartsfield style but I do prefer double grind rather that chisel. However I will consider something nice in a chisel grind.
3. Quality blades in general. I am on a bit of an old school Cold Steel kick at the moment so if you have older Tantos, Carbon V classics, Tai Pan, ect. But also interested in a large Strider folder like an SMF or AR, Microtechs, Large Busses, MMHW, Customs.
4. Maybe an Ipad Pro?