Everyone's latest acquisitions!

[Pirate63]

Just picked up ($10) and restored this Hammer Brand USA Kamp King

 

[TheFactor]

Spydie Endela K390

 

[TheFactor]

Here are a few that arrived this weekend...

* Bestech Slasher KnifeCenter Exclusive in Magnacut and Marbled Carbon Fiber - this has a bit better detent for a crossbar lock.
* Vosteed Talarurus (who names these!?!) in 14C28N and Blue Canvas Micarta (I missed wiping the oil off the blade for pics, whoops). The Vosteed is a little too short for me to palm it and flick open quickly without failure, or to close it, so likely it's going back.
* Reate EXO-U Utility Knife Gravity Knife in Purple Aluminum
* Original Goat Stocky Goat Ti "Drift" scales, anodized in green for Hogue Doug Ritter RSK

Don't squeeze the Vosteed down into your palm when trying to pull back one-handed on the crossbar lock in order to let the blade drop onto your hand!

You know what they say now you have to keep it
Nice spread and I don’t mean the cut

 

[DocJekl]

You know what they say now you have to keep it
Nice spread and I don’t mean the cut

I've heard, "It's not yours, until it bites you", and "You break it you buy it". So if you combines the two...

So, now it's, "You bleed on it, you keep it"?

 

[Chefget]

One on the right

https://gettier.org/edc/

 

[DocJekl]

More came in Monday! I only saw a couple of pics were out of focus after I put everything away

* Tactile Knife Co Chupacabra in Magnacut blade and Aluminum scales
* Tactical Pterodactyl Wharnie L in Cruwear with orange G10 scales and Hawaiian Sheath
* Vosteed Ankylo in S35VN and Ti with front flipper, rear flipper, and thumb hole - I'm naming ithim AnKylo Ren

https://imgur.com/utUmfnc

https://imgur.com/1d27CNp

 

[Ironbut]

This 112 Slim arrived yesterday. It's a nice, smaller, lightweight knife for Summer carry. The edge was kind of rough, but I'm seldom satisfied with new knife edges, and a few minutes on the Sharpmaker cleaned things up.

 

[Dorifto]

Well, another one that joints the family!!

Probably it will be my edc, due to it's "lightness" compared to the PF 818, and because it doesn't look so menacing, so less chances of having issues with the police, laws... etc.

Mine came with the clip and screws flush to the scales, so another point for them for hearing people's suggestions

Some pics

 

[rdnzl]

RoseCraft Blades Surgeon's Knife

 

[Smoke]

I wish Kabar made a TDI pin but until then...

 

[DocJekl]

Thanks to JWright214 , who sold me his TPK EDC Wharnie very similar to the one the post office lost, I now have one regardless. It's still in Magnacut with Jade scales and similar sheath. The main difference is these jade scales are slightly less green than what I ordered, the pattern on the sheath is offset differently, and the blade is slightly more brown than grey due a different forced patina.

To be honest, I still preferr the blade finish on original knife that never arrived, and the slightly different alignment of the design on the original sheath better. The scale texture also looks different. But this is closer than any of the others, since they didn't have one to offer me from the factory, and JW gave me a really good price, so I thank him!

The missing knife pics from manufacturer

The replacement knife

 

[SwissHeritageCo]

More came in Monday! I only saw a couple of pics were out of focus after I put everything away

* Tactile Knife Co Chupacabra in Magnacut blade and Aluminum scales
* Tactical Pterodactyl Wharnie L in Cruwear with orange G10 scales and Hawaiian Sheath
* Vosteed Ankylo in S35VN and Ti with front flipper, rear flipper, and thumb hole - I'm naming ithim AnKylo Ren

https://imgur.com/utUmfnc

https://imgur.com/1d27CNp

That tactile is particularly sweet.

 

[cbach8tw]

This 112 Slim arrived yesterday. It's a nice, smaller, lightweight knife for Summer carry. The edge was kind of rough, but I'm seldom satisfied with new knife edges, and a few minutes on the Sharpmaker cleaned things up.

I thought the 112 Slim had a more modern straight clip point, very interesting. Nice knife. I know the 110 LT has the more traditional curved clip, so I wonder if there is a 112 LT that may have a similar clip? It has the Slim’s handle design too. Curious.

 

[Ironbut]

I thought the 112 Slim had a more modern straight clip point, very interesting. Nice knife. I know the 110 LT has the more traditional curved clip, so I wonder if there is a 112 LT that may have a similar clip? It has the Slim’s handle design too. Curious.

Yeah, the blade shape is the same as my other 112s. I have a 110 LT that I call my beater Buck, and the 112 Slim will be doing the same duties. I haven't seen a 112 LT in a long time.

And I have an old 422 Bucklite, which was before the 112LT, and it's the exact same blade shape.

 

[TheFactor]

Spydie Salt 2 Wharnie

 

[chezberger27]

Just got this one in. amazing folder

 

[rdnzl]

 

[cbach8tw]

Yeah, the blade shape is the same as my other 112s. I have a 110 LT that I call my beater Buck, and the 112 Slim will be doing the same duties. I haven't seen a 112 LT in a long time.

And I have an old 422 Bucklite, which was before the 112LT, and it's the exact same blade shape.

Cool knives and thanks for sharing your 112s.

 

[hkssr20det]

Totally forgot I pre-ordered this one:

 

[Fripfrop]

Finally home and found this waiting for me on the kitchen counter. Great way to start a week off. Now if FedEx would just deliver the other one...