norcalAF
Platinum Member
- Joined
- Mar 24, 2023
- Messages
- 5,372
Now I just need to find one from my birthday, and on and on and....
-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
Everyone's latest acquisitions!
- Thread starter SW-EDC
- Start date
- Joined
- Oct 3, 2011
- Messages
- 5,443
Three Incoming today, Three more tomorrow. That will leave 12 pre-orders remaining that I've made between November 2023 and May 2024, including the CPK K20.1 that wont be here till next year 
* Mazer Walkabout in S90V and blue jeans linen micarta - thanks
navman
!
* CKF Echo Trol in S35VN and G10 from KC. That Custom Knife Factory, to add to my CKF EVO 3.0 and Stitch.
* GEC Urban Jack in green jigged bone - thanks
JasonInVa
!
JOSH'S PICS IN BETTER LIGHTING
IT'S THE SAME MODEL AS THE ONE I HAVE BELOW, BUT NOW IN S90V WITH TAPERED TANG, INSTEAD OF AEB-L. So I got one for toughness and one for edge retention!
* Mazer Walkabout in S90V and blue jeans linen micarta - thanks
navman
!* CKF Echo Trol in S35VN and G10 from KC. That Custom Knife Factory, to add to my CKF EVO 3.0 and Stitch.
* GEC Urban Jack in green jigged bone - thanks
JasonInVa
!
JOSH'S PICS IN BETTER LIGHTING
IT'S THE SAME MODEL AS THE ONE I HAVE BELOW, BUT NOW IN S90V WITH TAPERED TANG, INSTEAD OF AEB-L. So I got one for toughness and one for edge retention!
- Joined
- Oct 3, 2011
- Messages
- 5,443
I wouldn't rule out my eligibility, due to my hating to take apart one of my purple G-mascus models, in order to install my Original Goat Green Ti Metal Complex scales on one of them. But these scales I'd be happy to replace with the OG Gin Ti "Drift" scales!
Hit me up Gary only if you hate it
Actually, I really am hoping that this is the one for you. I'm sorry the smaller Mini RSK with CF scales didn't work out for you before.
SwissHeritageCo
Knifemaker / Craftsman / Service Provider
- Joined
- Jan 8, 2021
- Messages
- 3,095
Three Incoming today, Three more tomorrow. That will leave 12 pre-orders remaining that I've made between November 2023 and May 2024, including the CPK K20.1 that wont be here till next year
* Mazer Walkabout in S90V and blue jeans linen micarta - thanks
* CKF Echo Trol in S35VN and G10 from KC. That Custom Knife Factory, to add to my CKF EVO 3.0 and Stitch.
* GEC Urban Jack in green jigged bone - thanks
JOSH'S PICS IN BETTER LIGHTING
IT'S THE SAME MODEL AS THE ONE I HAVE BELOW, BUT NOW IN S90V WITH TAPERED TANG, INSTEAD OF AEB-L. So I got one for toughness and one for edge retention!
I'm really digging your foray into smaller fixies. That shade of blue really pops with the copper hardware,
navman
did a beautiful job and the crowned spine is just the cherry on top!
- Joined
- Oct 3, 2011
- Messages
- 5,443
Yeah, they're slightly different takes on the same pattern, the Mazer Walkabout.I'm really digging your foray into smaller fixies. That shade of blue really pops with the copper hardware,
One in tough belt-satin hollow ground AEB-L blade with a swedge down the length of the blade, no jimping, and a spine that can strike a spark with firesteel; and the new one in a edge-holding S90V and hollow ground hand-satin, with a crowned spine but jimping to improve grip along with a tapered tang.
I love them both, and would never part with them.
- Joined
- Jun 18, 2024
- Messages
- 249
Brand spanking new Zaan
- Joined
- Jun 18, 2024
- Messages
- 249
Check it out
- Joined
- Jun 18, 2024
- Messages
- 249
Scales phenomenalMail Call From Yesterday
- Joined
- Oct 2, 2016
- Messages
- 1,731
Im not a traditional knife guy but the wood on the top knife is beautifulGot my hands on a couple new Case knives today:
- Joined
- Oct 11, 2013
- Messages
- 21,724
Thank you, I appreciate it. I got lucky with this one. It was the last one they had, and it wasn't on display. I asked what they had in the cabinet under the display case, and when I saw this little guy, I snapped it up right away.
- Joined
- Oct 3, 2011
- Messages
- 5,443
Two more arrived today, with another pre-order from a knife-maker in Australia arriving tomorrow. Most of my other dozen pre-orders still have a weeks weeks to go.
* Busse Swamp Rat "Rat Tanto" in 50100B steel to add to my Ratmandu - this was a FOMO purchase that I didn't need
* Benchmade Adira Mini in Magnacut and Grivory (cutting board reviews (now CBRx) saw around 61.5 HRC on his). I did a mini review in
Quiet
's Adira review thread.
Sorry I didn't get a look right down the center of the blade, but it looked good through my iPhone screen when I filmed this.
* Busse Swamp Rat "Rat Tanto" in 50100B steel to add to my Ratmandu - this was a FOMO purchase that I didn't need
* Benchmade Adira Mini in Magnacut and Grivory (cutting board reviews (now CBRx) saw around 61.5 HRC on his). I did a mini review in
Quiet
's Adira review thread.
Sorry I didn't get a look right down the center of the blade, but it looked good through my iPhone screen when I filmed this.
I dont know anything about fixed blades, but that bottom swamp rat is SUPER nice looking!Two more arrived today, with another pre-order from a knife-maker in Australia arriving tomorrow. Most of my other dozen pre-orders still have a weeks weeks to go.
* Busse Swamp Rat "Rat Tanto" in 50100B steel to add to my Ratmandu - this was a FOMO purchase that I didn't need
* Benchmade Adira Mini in Magnacut and Grivory (cutting board reviews (now CBRx) saw around 61.5 HRC on his). I did a mini review in
Sorry I didn't get a look right down the center of the blade, but it looked good through my iPhone screen when I filmed this.
w
Gold Member
- Joined
- Jul 30, 2000
- Messages
- 1,572
Your starting to rival Doc with the number of blades !landing at your doorstep.
......Rob a bank did ya
.... ????.........