FOR SALE
#1 offering A great fixed blade by JT KNIVES -
$ 85.00 Shipped delivered to US addresses - all inclusive.
• I'm the original owner.
• This is one is PRISTINE - NEW and NOT USED - SHARP from maker.
Made from 1/4" thick 5160 stock and heat treated to 58-59RC with a deep hollow ground 4" blade. The handle wrap uses 12 feet of MIL-C-5040H Type III 550 cord. The wrap is exceptionally well done! Sheath is set up for large TechLoc
WILL CONSIDER TRADE OFFERS - the right small BUSSE or less than 3" fixed blade w/sheath. Nothing fancy - just a good EDC that I can use as a thrower too
Pay Pal goods please.
Message or email for other considerations, with questions or too request more photos.
E-mail to - dustyjunco AT Gmail DOT com
POST - "I'll take it" in thread then please follow up with "Send Message" (new format - just click on my avatar) or email.
Thanks for looking.
Ray
______________________________________________________________
SAW BLADE NESSMUK and Sheath by HARDEDGE KNIVES
THIS ONE IS SOLD
This one is Very Lightly Used - came as a worker and looks like it. I have softened the edges of the wood, cleaned up the blade and resharpened. IT IS BETTER THAN NEW! Sharp and capable!
I am the original owner
• Flat semi convex ground Nessmuk from a vintage 10 inch table saw blade; one of those that had NO carbide inserts which make very good knives. After the knife was ground the blade was differentially heat treated to an edge hardness of about 60Rc.
• Blade length 4" from tip to wood scale and bright steel finish (not polished).
• Overall length 9" long
• Handle is black diamond wood attached to the knives full tangs with loveless bolts and epoxy.
• 3/16" diameter brass lined lanyard hole.
• Sheath is 8/9 ounce tooled leather with belt loop. Typically he sells these with Kydex sheaths. This one (I think) is unique, and ready to wear and carry.
• I really like the riveted sheath
• Full tang with lanyard hole
#1 offering A great fixed blade by JT KNIVES -
$ 85.00 Shipped delivered to US addresses - all inclusive.
• I'm the original owner.
• This is one is PRISTINE - NEW and NOT USED - SHARP from maker.
Made from 1/4" thick 5160 stock and heat treated to 58-59RC with a deep hollow ground 4" blade. The handle wrap uses 12 feet of MIL-C-5040H Type III 550 cord. The wrap is exceptionally well done! Sheath is set up for large TechLoc
WILL CONSIDER TRADE OFFERS - the right small BUSSE or less than 3" fixed blade w/sheath. Nothing fancy - just a good EDC that I can use as a thrower too
Pay Pal goods please.
Message or email for other considerations, with questions or too request more photos.
E-mail to - dustyjunco AT Gmail DOT com
POST - "I'll take it" in thread then please follow up with "Send Message" (new format - just click on my avatar) or email.
Thanks for looking.
Ray
______________________________________________________________
SAW BLADE NESSMUK and Sheath by HARDEDGE KNIVES
THIS ONE IS SOLD
This one is Very Lightly Used - came as a worker and looks like it. I have softened the edges of the wood, cleaned up the blade and resharpened. IT IS BETTER THAN NEW! Sharp and capable!
I am the original owner
• Flat semi convex ground Nessmuk from a vintage 10 inch table saw blade; one of those that had NO carbide inserts which make very good knives. After the knife was ground the blade was differentially heat treated to an edge hardness of about 60Rc.
• Blade length 4" from tip to wood scale and bright steel finish (not polished).
• Overall length 9" long
• Handle is black diamond wood attached to the knives full tangs with loveless bolts and epoxy.
• 3/16" diameter brass lined lanyard hole.
• Sheath is 8/9 ounce tooled leather with belt loop. Typically he sells these with Kydex sheaths. This one (I think) is unique, and ready to wear and carry.
• I really like the riveted sheath
• Full tang with lanyard hole
Last edited:
