Fall Creek - several Bird and Trouts plus a Hunting blade

Bob Carter

Bob Carter

Feedback: +5 / =0 / -0
Joined
Jun 19, 2012
Messages
257
Bird and Trout in Zebra wood
1/8" CPM154CM from Aldo's
8" OAL
3 5/16" blade - full height grind with satin finish.
4 1/2" handle - Zebra wood scales over .060" black G10. Handle has Tru-Oil finish. Brass mosaic pins and lanyard tube.
Knife ships with our new design Birdhouse sheath.
$149.00 - price includes CONUS shipping. PayPal preferred.

zeb-bandt11_zpscd2fabcf.jpg


zeb-bandt10_zpsa280c65c.jpg


zeb-bandt9_zps613f501a.jpg



Bird and Trout in Curly Maple
1/8" CPM154CM from Aldo's
8" OAL
3 1/8" blade - full height grind with satin finish
4 3/8" handle - Curly Maple scales over .060" black G10. Handle has Tru-Oil finish. Brass mosaic pins and lanyard tube.
Knife ships with our new design Birdhouse sheath.
$149.00 - price includes CONUS shipping. PayPal preferred.

cm-bandt8_zps513ab577.jpg


cm-bandt7_zpsde7c6a38.jpg


cm-bandt6_zpscc94414a.jpg


cm-bandt5_zps6fe087b7.jpg



Bird and Trout in Black Walnut
1/8" CPM154CM from Aldo's
8" OAL
3 3/16" blade - full height grind with satin finish
4 1/2" handle - Black Walnut scales over .030" white G10. Handle has Tru-Oil finish. Brass mosaic pins and lanyard tube.
Knife ships with our new design Birdhouse sheath.
$149.00 - price includes CONUS shipping. PayPal preferred.

bw-bandt3_zpsbc561e81.jpg


bw-bandt4_zpsd373d386.jpg


bw-bandt2_zps04bc90d4.jpg


bw-bandt1_zpsadd7f019.jpg



Hunting knife in Ambrosia
5/32" O1 from Aldo's
9 3/8" OAL
4 1/4" blade - satin finish and acid etched flats.
4 7/8" handle - Ambrosia scales over .030" white G10 and 3/16" natural canvas Micarta. Handle has Tru-Oil finish. Aluminum pins and nickle silver mosaic pin.
Knife ships tooled leather sheath.
$165.00 - price includes CONUS shipping. PayPal preferred.

skinner4_zps7a88affd.jpg


skinner3_zps4425639e.jpg


skinner2_zps017e4c68.jpg


skinner1_zps981d47eb.jpg
 
Thanks for the encouragement. This is a new design for us. The CPM154 makes for a great light carry.
 
Shovelit said:
Thanks Stabber. Just visited your site. Looks terrific!
Click to expand...


I totally agree! I'm only into 'hunters' and 'skinners' and your selection of 'hunters' is impressive.

Perhaps, only after the overall look and design of the knife, I always then look for the type of blade steel that is used ( I primarily lean towards SS's and especially......CPM154). I did notice that only a couple of the many 'hunters' you have displayed state what type steel is used. One can always email you, but that takes time and energy spent that coud be totally eliminated when initially posting all the other specifics about the knife. I even find that on this site that I must email knifemakers for that same info about 30% of the time. I would suspect that more than a few sales would have taken place that didn't if the type of blade steel were easily discerned in the overall description of the knife. Just food for thought.....

You do have a very attractive site with a lot of inventory that should bode well for you going forward. Best of luck to you!


Shovelit - your Black Walnut and Curley Maple knives are very, very nice! That they are offered in CPM154.....even better. The one I was most taken with went first........go figure.

Best of luck on your sale.
 
Last edited:
Tagging this one to find it later. I really like the fact you have handles large enough for a MAN . next commission check these are on the list.
 
Great responses. These sheaths are made from 8 to 9 oz. wickett and Craig leather Nowicki. RTW just PMwhen ready. I have the same thoughts on short handled knives.
 
You must log in or register to reply here.
Back
Top