Buy the matching Asp - Patch Knife set for $500 | Buy all 4 for $895
Fiddleback Forge Patch Knife - $250 - 7.25" overall, 3.13" blade, 4.1 ounces; 1/8" A2 steel, skeletonized full thickness tang, tuxedo with a twist configuration - black canvas micarta, natural canvas micarta pins and liners, orange G10 pinstripes.
Great condition, lightly used a few times and I might have lightly stropped it once. No sheath with this one.
Fiddleback Forge Asp $275 - 1/8 A2 steel, skeletonized full thickness tang, tuxedo with a twist configuration - black canvas micarta, natural canvas micarta pins and liners, orange G10 pinstripes. Blade length is approximately 3.75", overall length is approximately 8.25", weight is 4.9 ounces.
Great condition - lightly used in the kitchen a few times and some light patina remains. I don't recall if I did or not but I might have lightly stropped it once. I didn't notice anything else when polishing it for the pics below, but since it has been used, there may some other very faint scuffs that are not readily noticeable. This one does not come with a sheath.
Fiddleback Forge Bushcrafter Jr. - $240 - 1/8" 01 steel, skeletonized full thickness tang, bloodwood with black G10 liners and white G10 pinstripes. Approximate overall length is 7.5", approximate blade length is 3.5".
Excellent condition - carefully used once to do a little whittling, some very small, very faint scuffs on the blade near the tip don't show up in photos.
Fiddleback Forge Bushfinger (production model) - $180 - 5/32" CPM S35VN steel, natural canvas micarta scales. Approximate overall length is 8.75" with a 4.0" blade. Comes with sheath.
Good condition - used a few times in the kitchen and to do a little whittling. Some minor and faint patina, staining, scuffs and scratches. Scales were removed and replaced once and although the bolts were not stripped, I did round the edges a bit but they should still work if you want to remove the scales at some point if you have the correct bit.
I also have this KSF pocket sheath that I will include with the Patch Knife or Bushcrafter Jr, whichever sells first
Prices includes PayPal fees and USPS Priority shipping to US addresses. I will accept USPS money orders and will ship internationally only if buyer is willing to pay via PayPal gift and accept responsibility for lost or seized shipment.
I'm hoping these will sell but don't mind getting trades offers via PM or email. Im mostly interested in other Fiddlebacks like a Bushfinger or Hunter and might be interested in a 3 Finger Karda, Bushnub, or Hiking Buddy. Ive grown partial to dark wood scales (i.e. blackwood, ironwood, cocobolo, rosewood) and orange pinstripes with natural canvas micarta liners but I will consider other models and configurations.
Fiddleback Forge Patch Knife - $250 - 7.25" overall, 3.13" blade, 4.1 ounces; 1/8" A2 steel, skeletonized full thickness tang, tuxedo with a twist configuration - black canvas micarta, natural canvas micarta pins and liners, orange G10 pinstripes.
Great condition, lightly used a few times and I might have lightly stropped it once. No sheath with this one.
Fiddleback Forge Asp $275 - 1/8 A2 steel, skeletonized full thickness tang, tuxedo with a twist configuration - black canvas micarta, natural canvas micarta pins and liners, orange G10 pinstripes. Blade length is approximately 3.75", overall length is approximately 8.25", weight is 4.9 ounces.
Great condition - lightly used in the kitchen a few times and some light patina remains. I don't recall if I did or not but I might have lightly stropped it once. I didn't notice anything else when polishing it for the pics below, but since it has been used, there may some other very faint scuffs that are not readily noticeable. This one does not come with a sheath.
Fiddleback Forge Bushcrafter Jr. - $240 - 1/8" 01 steel, skeletonized full thickness tang, bloodwood with black G10 liners and white G10 pinstripes. Approximate overall length is 7.5", approximate blade length is 3.5".
Excellent condition - carefully used once to do a little whittling, some very small, very faint scuffs on the blade near the tip don't show up in photos.
Fiddleback Forge Bushfinger (production model) - $180 - 5/32" CPM S35VN steel, natural canvas micarta scales. Approximate overall length is 8.75" with a 4.0" blade. Comes with sheath.
Good condition - used a few times in the kitchen and to do a little whittling. Some minor and faint patina, staining, scuffs and scratches. Scales were removed and replaced once and although the bolts were not stripped, I did round the edges a bit but they should still work if you want to remove the scales at some point if you have the correct bit.
I also have this KSF pocket sheath that I will include with the Patch Knife or Bushcrafter Jr, whichever sells first
Prices includes PayPal fees and USPS Priority shipping to US addresses. I will accept USPS money orders and will ship internationally only if buyer is willing to pay via PayPal gift and accept responsibility for lost or seized shipment.
I'm hoping these will sell but don't mind getting trades offers via PM or email. Im mostly interested in other Fiddlebacks like a Bushfinger or Hunter and might be interested in a 3 Finger Karda, Bushnub, or Hiking Buddy. Ive grown partial to dark wood scales (i.e. blackwood, ironwood, cocobolo, rosewood) and orange pinstripes with natural canvas micarta liners but I will consider other models and configurations.
Last edited: