Fiddleback Friday 08/09/13

Fiddleback

Fiddleback

Knifemaker
Moderator
Knifemaker / Craftsman / Service Provider
Joined
Oct 19, 2005
Messages
19,782
As always, my first priority is to thank all of you. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.

Happy Friday to you all. Ths week I have a bunch of fine cutlery for your perusal. I put all the Scandi’s together in one pic, then moved to the convex knives.

Thank you all for the support. My family depends on y’all.

The prices this week are without sheaths. I am lucky enough to work with both Heber Ellsworth and Rick Lowe. Both make fantastic sheaths that are completely different from one another. I appreciate your support for them as well.


All of the steel this week is 3D Spalted 01.

Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.

Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.

Shipping is included within the US. We do all our shipping on Thursdays.



The Scandi Knives. The knives at the top of the pic are 1/8” thick and the two at the bottom of the pic are 3/32” thick. All of these are skeletonized full thickness tang knives.

20130809IMG_0522-vi.jpg


20130809IMG_0523-vi.jpg


Top to bottom

2013 0809 001 – Bushcrafter, Osage Orange over natural canvas with a blue pinstripe, Scandi on 1/8” thick steel - $250

2013 0809 02 – Terassuar, Arizona Desert Ironwood on black g10 with thick orange g10 spacers, Scandi on 1/8” thick steel - $250 SOLD

2013 0809 03 – Kephart, Tuxedo, Scandi on 3/32” thick steel - $225

2013 0809 004 – Ladyfinger, Antique canvas on black with a lime green pinstripe, Mosaic pin, $255 SOLD









Hiking Buddies – Two beautiful 1/8” thick full thickness skeletonized tang knives.

20130809IMG_0516-vi.jpg


20130809IMG_0517-vi.jpg



2013 0809 005 – Hiking Buddy, Bloodwood over black g10 with white g10 pinstripe, Convex on 1/8” thick steel - $225

2013 0809 006 – Hiking Buddy, Whte linen over natural canvas with a glue g10 pinstripe and mosaic pin, Convex on 1/8” thick steel - $230 SOLD






Sneaky Pete – Whoa. I love using pinecone handle scales!

20130809IMG_0506-vi.jpg


20130809IMG_0507-vi.jpg


20130809IMG_0509-vi.jpg


20130809IMG_0510-vi.jpg


20130809IMG_0511-vi.jpg


2013 0809 007 – Sneaky Pete, Pinecone and red aluminite on black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $315 SOLD











Arete – Bloodwood. Great grind on this knife.

20130809IMG_0518-vi.jpg


20130809IMG_0520-vi.jpg


2013 0809 008 – Arete, Bloodwood over black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $290 SOLD





Kephart – More and the last of the super curly blue stabilized Maple.

20130809IMG_0525-vi.jpg


20130809IMG_0527-vi.jpg


20130809IMG_0529-vi.jpg


2013 0809 009 – Kephart, Stabilized and dyed curly Maple on black g10 liners with a white g10 pinstripe, Skeletonized full thickness tang, Convex on 5/32” thick steel - $255









Bushfingers – These are both hot, and the Ash one almost had to stay with me.

20130809IMG_0494-vi.jpg


20130809IMG_0538-vi.jpg


20130809IMG_0541-vi.jpg


2013 0809 011 – Bushfinger, Cocobolo over natural canvas wit an orange g10 pinstripe, Full thickness skeletonized tang, Convex on 5/32” thick steel - $250 SOLD

2013 0809 012 – Bushfinger, Stabilized Dyed Ash over natural canvas with a white g10 pinstripe, Full thickness skeletonized tang, Convex on 5/32” thick steel - $250 SOLD






Hunters – Two nice ones, both wearing burlap! Almost the last of the red, and there won’t be any more red like this!

20130809IMG_0487-vi.jpg


20130809IMG_0491-vi.jpg


20130809IMG_0492-vi.jpg


20130809IMG_0490-vi.jpg


2013 0809 013 – Hunter, Red Shadetree Burlap micarta over black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $340 SOLD

2013 0809 014 – Hunter, Blue Shadetree Burlap micarta over black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $340 SOLD







Fiddleback Fighter – Drunken Burlap micarta.

20130809IMG_0512-vi.jpg


20130809IMG_0513-vi.jpg


20130809IMG_0514-vi.jpg


2013 0809 015 – Fiddleback Fighter, Drunken burlap micarta over black with a white g10 pinstripe, Tapered Tang, Convex on 3/16” thick steel - $365






Thanks again for looking guys. This all happens because of your interest!
 
Last edited:
2013 0809 02 – Terassuar, Arizona Desert Ironwood on black g10 with thick orange g10 spacers, Scandi on 1/8” thick steel - $250


Mine :)
 
Andy,
I would like the
2013 0809 02 – Terassuar, Arizona Desert Ironwood on black g10 with thick orange g10 spacers, Scandi on 1/8” thick steel - $250
Regards, Guido
 
2013 0809 02 – Terassuar, Arizona Desert Ironwood on black g10 with thick orange g10 spacers, Scandi on 1/8” thick steel - $250 - I'll take it
 
Gorgeous Hunters and Bushfingers. Nice to see skeletonized tangs on the Bushies (the lack of one is probably the only thing I'd change on my S35VN one)
 
Ouch...hate to see a miss that close.

I'm 50/50 on grabbing that osage bushcrafter. I swear to god wanted one in scandi to match the hiking buddy and muk camp knife I just bought but I was hoping for orange liners.

Something in Maroon linen next week, Andy? I'd buy a Duke in Maroon in 2 seconds flat.
 
I'll take the

2013 0809 012 – Bushfinger, Stabilized Dyed Ash over natural canvas with a white g10 pinstripe, Full thickness skeletonized tang, Convex on 5/32” thick steel - $250

Payment made via Paypal.

Thanks Andy!
 
Last edited:
2013 0809 013 – Hunter, Red Shadetree Burlap micarta over black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick steel - $340- try this again, I'll take it
 
Very nice sir. Between these and the ones just posted on KSF recently you really knocked it out of the park this week!!! That Sneaky Pete! If I could only find a good reason that I really needed it. . .
 
So......is the terrasaur available?? Lol!

That model has been flying under the radar. But it is sure sweet.

Excellent work again.
 
Sweet batch Andy! That Sneaky Pete looks awesome! Love the look of that pine cone, though admittedly I need somebody to bring me up to speed on the pine cones stuff...
Those Bushfingers look stunning, and that fighter looks wicked.
 
4ths (or is it 5ths?) on the Terrasaur LOL

Great batch Andy.
 
I'll take the Terra...nah, I'll take nothing!

Can't wait for last week's to come anyway ;)

How much weight in steel is removed on those skeletonized scandisaurs? Maybe a percentage? 20%? curious on the weight on em versus standard issue Saurasaurs.

Looking sexxxxxxxxxxy.
 
this may be the one i've been waiting for. i certainly want to check it out. I'll take it!

2013 0809 011 – Bushfinger, Cocobolo over natural canvas wit an orange g10 pinstripe, Full thickness skeletonized tang, Convex on 5/32” thick steel - $250

Thanks.
 
Philip L said:
I'll take the

2013 0809 012 – Bushfinger, Stabilized Dyed Ash over natural canvas with a white g10 pinstripe, Full thickness skeletonized tang, Convex on 5/32” thick steel - $250

Payment made via Paypal.

Thanks Andy!
Click to expand...

Nice score man, that dyed green ash is beautiful!
 
TPVT said:
this may be the one i've been waiting for. i certainly want to check it out. I'll take it!

2013 0809 011 – Bushfinger, Cocobolo over natural canvas wit an orange g10 pinstripe, Full thickness skeletonized tang, Convex on 5/32” thick steel - $250

Thanks.
Click to expand...

Looks really nice, I love the grind height on that one. Nice and high for slicing, but enough spine left for strength and to show the spalting.
 
You must log in or register to reply here.
Back
Top