Hi Folks, I'm jumping in for Andy as he was heading to softball tryouts with Hannah after work. Looks like there was a lot of posts at almost the same time for the same knife. If I screwed anything up here Andy will clear it up. Sorry if you didn't get the knife you were after, but we'll make more!
I will take the maroon Sneaky Pete.
Thanks Andy!
Thanks Eric, she's all yours!
Please
2014 0214 004 – Bushboot, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200
You got it Kenny! Thank you.
I'd like:
2014 0214 002 – Bushraptor, Slate g10 over black g10 with a white g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240
The slate BR is yours M4, thanks as always.
2014 0214 016 – Woodsman, Stabilized and dyed curly and quartersawn Red Oak (outstanding), SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $350
Phil
Thanks Phil! The Woodsman is yours. I got your PM too, appreciate it. We'll ship the knife on Tuesday.
Andy, I'll take: 2014 0214 012 – Bushfinger, Stabilized and dyed curly and quartersawn Red Oak on black canvas with black canvas bolsters, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $315 please!
Will
You got it Will! Nice choice. Thanks.
The guacho is yours Mick. We'll ship the whole bundle together on Tuesday.
Dang! Seconds on the bushboot.
2014 0214 004 – Bushboot, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200
Sorry VA!
I'll take the
2014 0214 006 – Small Gaucho, Stabilized and Dyed Black Palm over black g10 with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $300
Thanks!
Sorry MC, that was claimed mere moments before you. Hopefully that model will come back around soon.
I'll take 2014 0214 017 – Fiddleback Toothpik, Stabilized Box Elder Burl with black canvas bolsters and a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $440
The toothpik is yours Bill! It's a great knife.
2014 0214 017 – Fiddleback Toothpik, Stabilized Box Elder Burl with black canvas bolsters and a lime green g10 pinstripe, SFT Tang, Convex on THICK 3/16” thick 3D Spalted 01 steel - $440 please
Sorry Will, your polite manners cost you this one. ;-)
Andy could I have 2014 0214 002 Bushraptor Slate G10? Thanks Jim
Sorry Jim, but the slate Bushraptor was claimed earlier. We'll make more...
i'll take the 2014 0214 003 – Hiking Buddy, Marblewood over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $240
You got the Marblewood HB Ballyhoo. Thank you! We are liking the marblewood more and more as we use it lately. Very dense stuff.
I'll take the 2014 0214 005 – EDCII, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200. Thanks
You got the Tux EDC Bb! Thank you.
2014 0214 011 – Bushfinger, Black canvas on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265
Please Sir!
Thanks Shane, you got the black BF. It's a nice knife for sure. I don't think we'll have those other knives of yours ready to send back on Tuesday - the storm this week definitely set us back a few days - but we'll get this one out to you and those asap. Thanks.
2014 0214 007 – KE Bushie with a guard (one of a kind), Stabilized Box Elder burl over natural canvas with a lime green g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $275
Will, you got the KE Bushie. I like this design a lot. I'm going to try and get Andy to make a few more of these, I think it is a keeper.
2014 0214 007 – KE Bushie with a guard (one of a kind), Stabilized Box Elder burl over natural canvas with a lime green g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $275
I'll take it!
Sorry Elstad! Missed out by a few moments. As mentioned above, hopefully we'll see more of these in the future.
Andy:
I'll take 2014 0214 013 – Bushfinger, Tuxedo Config, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265
Thanks
You got the Tux BF Prom52. I think we are also sitting on a cocobolo Bushcrafter from a couple weeks back - does that ring a bell? Let's email and confirm.
2014 0214 015 – Sneaky Pete, Maroon linen over natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $265
I'll take it!
Sorry again Elstad, the Maroon SP was also sharked.
Andy:
I'll take 2014 0214 015 – Sneaky Pete, Maroon linen over natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $265
As above, this knife has gone to one of the veteran sharks in the water.
That's got to be the quickest start/feeding frenzy to a friday yet! I went to the bathroom and half the knives were gone!
Yes, we recommend not going to the bathroom on Friday's.
2014 0214 010 – Nessmuk, Gorgeous Knife, Bone white linen micarta over natural canvas with a lime green g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $305
I'll take it.....
You got the bone Nessmuk A2vg! Thank you.
Andy:
I'll take 2014 0214 005 – EDCII, Tuxedo Config, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200 if its still available
Thanks
Sorry Prom, that was claimed earlier.
Sorry guys....I wanted the Nessmuk and not the Sneaky Pete
2014 0214 014 – Sneaky Pete, Green and black linen micarta over natural canvas with a green g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $265
Yup, we have you down for the Bone Nessmuk and NOT the Sneaky Pete. Thanks for the clarification.
Sorry Panda, that was claimed earlier.
2014 0214 007 – KE Bushie with a guard (one of a kind), Stabilized Box Elder burl over natural canvas with a lime green g10 pinstripe, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $275
I'm sorry BBQ B - that knife was already sharked.
Ok! I'm joining hump day!
Andy I'll take
2014 0214 008 – Nessmuk, Wenge with natural canvas bolsters and liners, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $305
You got it David! Thank you!!
2014 0214 008 – Nessmuk, Wenge with natural canvas bolsters and liners, SFT Tang, Convex on 3/32” thick 3D Spalted 01 steel - $305
I'll Take it.
Wayne
damn...too late?
Too late Wayne. Thanks though. We've got the Hunter from last week heading your way on Tuesday though.
I believe that the 001 Bushraptor 3 / 32 " and the 009 Black and Blue Nessmuk and the 014 Green and Black Sneaky Pete are still available by my calculations. Correct me if I'm wrong but does the 009 Nessmuk have a mosaic pin.
Good eye, Mick. The blue Nessie does have a mosaic beauty pin in it.
Thanks everybody!