- Joined
- Oct 19, 2005
- Messages
- 19,797
I love making knives for you all. Thanks to everyone for supporting Fiddleback Forge. Its an amazing feeling to do this for a living. Fiddleback Forge depends on y’all, and we hope you love the tool you buy from us.
Well, it is Friday again, and we have a pretty nice week of work to show you today. The Wasp has infected my brain, and I’ve had dreams about it all week. I have two avail today. Both of this week’s HB’s are model standard. And the Kepharts, while all SFT, are out of the world this week.
Please quote the whole description in your post when you shark a knife. This keeps me and Ken from having to scroll back and forth while we sort out the mayhem. Failing to do this won’t mean your call doesn’t count, but it really helps.
Ken and I have decided for now to make international shipping $40 flat. That covers 90% of the shipments. When it goes up and we get upside down we’ll change it. This should make it more simple for overseas purchasers to finalize payment.
The steel this week is 3D Spalted 01 steel.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
I have a Big batch of small knives this week. Really nice ones too. This red Bushraptor is fantastic! Both of the HB’s this week are model standar knives as is the red Bushraptor.
2014 0307 001 – Runt, Arizona Desert Ironwood over natural canvas with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200 SOLD
2014 0307 002 – EDKarda, Maroon linen on natural canvas with a PINK g10 pinstripe, SFT Tang Convex on 1/8” htick 3D Spalted 01 steel - $240 SOLD
2014 0307 003 – EDC II, Black and green linen micarta on black g10 with a lime green g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240 SOLD
2014 0307 004 – Hiking Buddy, Model Standard, Stabilized and dyed Ash over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $290 SOLD
2014 0307 005 – Hiking Buddy, Model Standard, Tuxedo Config, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240 SOLD
2014 0307 006 – Bushraptor, Model Standard Knife, Crimson Canvas micarta on natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $290 SOLD
So I had a dream this week that someone had attached a Wasp to a big sewing machine, and was torturing me by pushing my arm into the machine. That Wasp was going a million miles a minute, and tore my arm almost off in the dream. It was one of those you wake up from and say, thank God that was only a dream. Still. It was really neat looking and I remember even in the dream thinking it was cool.
2014 0307 007 – Wasp, Crimson Canvas on black with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240 SOLD
2014 0307 008 – Wasp, Model Standard Knife, Stabilized and dyed Ash on black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $290 SOLD
Today’s Twosome of workers ready for cutting.
2014 0307 009 – Nessmuk, Ruby Burlap from Shadetree over black g10 with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
2014 0307 010 – Arete, Model Standard Knife, OD Canvas on natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $300 SOLD
Three Kepharts. All SFT. I mean these knives are workhorses. Check out that burl too! And the Ash is some of the best I’ve seen.
2014 0307 011 – Kephart, Stabilized and Dyed Blue Ash over black g10 with a white g10 pinstripe, SFT Tang, Conveex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
2014 0307 012 – Kephart, Stabilized and Dyed Maple Burl on black g10 with a lime green g10 pinstripe, SFT Tang, Conveex on 1/8” thick 3D Spalted 01 steel - $300 SOLD
2014 0307 013 – Kephart, Tuxedo Config, SFT Tang, Conveex on 1/8” thick 3D Spalted 01 steel - $225 SOLD
Sneaky Pete!
2014 0307 014 – Sneaky Pete, Stabilized and Dyed curly and quartersawn Red Oak over black g10 with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
2014 0307 015 – Sneaky Pete, Model Standard Knife, Cofeebag Burlap on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $305 SOLD
2014 0307 016 – Sneaky Pete, Maroon linen on natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
This is the Bushfinger section. I have a few special knives in this category this week. I hope you still love the Bushfinger as much as I do.
2014 0307 017 – Bushfinger, Marblewood over black g10 with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
2014 0307 018 – Bushfinger, Model Standard Knife, Stabilized and dyed Lacewood over black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $305 SOLD
2014 0307 019 – Bushfinger, Maroon linen on natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
A Hunter and a Duke. Someone told me this Marblewood looked like plywood in the pics I take. I stink at photography. This stuff is really impressive in person.
2014 0307 020 – Hunter, Model Standard Knife, Drunken Burlap over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $355 SOLD
2014 0307 021 – Duke, Model Standard Knife, Marblewood over black g10 with an orange g10 pinstripe and Trinity Pinout, Tapered Tang, Convex on 5/32” thick 3D Spaltd 01 steel - $390 SOLD
Thank you for your interest folks.
Well, it is Friday again, and we have a pretty nice week of work to show you today. The Wasp has infected my brain, and I’ve had dreams about it all week. I have two avail today. Both of this week’s HB’s are model standard. And the Kepharts, while all SFT, are out of the world this week.
Please quote the whole description in your post when you shark a knife. This keeps me and Ken from having to scroll back and forth while we sort out the mayhem. Failing to do this won’t mean your call doesn’t count, but it really helps.
Ken and I have decided for now to make international shipping $40 flat. That covers 90% of the shipments. When it goes up and we get upside down we’ll change it. This should make it more simple for overseas purchasers to finalize payment.
The steel this week is 3D Spalted 01 steel.
Payment may be made to Paypal, or by personal check or MO. I hold all personal checks until they have cleared. This usually doesn’t cause a delay because they usually clear before shipping day.
Attention!!! The paypal address is: fiddlebackpayments at att dot net. Please describe your purchase in the payment notes.
I have a Big batch of small knives this week. Really nice ones too. This red Bushraptor is fantastic! Both of the HB’s this week are model standar knives as is the red Bushraptor.
2014 0307 001 – Runt, Arizona Desert Ironwood over natural canvas with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200 SOLD
2014 0307 002 – EDKarda, Maroon linen on natural canvas with a PINK g10 pinstripe, SFT Tang Convex on 1/8” htick 3D Spalted 01 steel - $240 SOLD
2014 0307 003 – EDC II, Black and green linen micarta on black g10 with a lime green g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240 SOLD
2014 0307 004 – Hiking Buddy, Model Standard, Stabilized and dyed Ash over natural canvas with a blue g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $290 SOLD
2014 0307 005 – Hiking Buddy, Model Standard, Tuxedo Config, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240 SOLD
2014 0307 006 – Bushraptor, Model Standard Knife, Crimson Canvas micarta on natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $290 SOLD
So I had a dream this week that someone had attached a Wasp to a big sewing machine, and was torturing me by pushing my arm into the machine. That Wasp was going a million miles a minute, and tore my arm almost off in the dream. It was one of those you wake up from and say, thank God that was only a dream. Still. It was really neat looking and I remember even in the dream thinking it was cool.
2014 0307 007 – Wasp, Crimson Canvas on black with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240 SOLD
2014 0307 008 – Wasp, Model Standard Knife, Stabilized and dyed Ash on black g10 with a white g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $290 SOLD
Today’s Twosome of workers ready for cutting.
2014 0307 009 – Nessmuk, Ruby Burlap from Shadetree over black g10 with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
2014 0307 010 – Arete, Model Standard Knife, OD Canvas on natural canvas with a white g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $300 SOLD
Three Kepharts. All SFT. I mean these knives are workhorses. Check out that burl too! And the Ash is some of the best I’ve seen.
2014 0307 011 – Kephart, Stabilized and Dyed Blue Ash over black g10 with a white g10 pinstripe, SFT Tang, Conveex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
2014 0307 012 – Kephart, Stabilized and Dyed Maple Burl on black g10 with a lime green g10 pinstripe, SFT Tang, Conveex on 1/8” thick 3D Spalted 01 steel - $300 SOLD
2014 0307 013 – Kephart, Tuxedo Config, SFT Tang, Conveex on 1/8” thick 3D Spalted 01 steel - $225 SOLD
Sneaky Pete!
2014 0307 014 – Sneaky Pete, Stabilized and Dyed curly and quartersawn Red Oak over black g10 with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
2014 0307 015 – Sneaky Pete, Model Standard Knife, Cofeebag Burlap on black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 1/8” thick 3D Spalted 01 steel - $305 SOLD
2014 0307 016 – Sneaky Pete, Maroon linen on natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $275 SOLD
This is the Bushfinger section. I have a few special knives in this category this week. I hope you still love the Bushfinger as much as I do.
2014 0307 017 – Bushfinger, Marblewood over black g10 with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
2014 0307 018 – Bushfinger, Model Standard Knife, Stabilized and dyed Lacewood over black g10 with a lime green g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $305 SOLD
2014 0307 019 – Bushfinger, Maroon linen on natural canvas with a white g10 pinstripe, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $255 SOLD
A Hunter and a Duke. Someone told me this Marblewood looked like plywood in the pics I take. I stink at photography. This stuff is really impressive in person.
2014 0307 020 – Hunter, Model Standard Knife, Drunken Burlap over black g10 with an orange g10 pinstripe, Tapered Tang, Convex on 5/32” thick 3D Spalted 01 steel - $355 SOLD
2014 0307 021 – Duke, Model Standard Knife, Marblewood over black g10 with an orange g10 pinstripe and Trinity Pinout, Tapered Tang, Convex on 5/32” thick 3D Spaltd 01 steel - $390 SOLD
Thank you for your interest folks.
Last edited:
