- Joined
- Jul 8, 2008
- Messages
- 1,079
Here is one of my fish and small game knives. this pattern has a slightly oversized handle that is straighter than a normal small game and fish knife for a better grip and angle when opening up trout. it features my 1095 high carbon steel triple quenched and tempered with a nice thin grind on 3/32" stock, decked out with a handsanded finish etched and buffed, cocobolo handle with a brass guard and pin.
OAL- 8"
blade- 3 5/8" long tip to scales, .087" thick at the spine, .037" measured 1/4" behind the edge, and .010" thick at the shoulder of the edge. 3/4" wide
steel- 1095 high carbon steel, triple edge quenched and tempered, for a really nice performing blade that takes and holds a great edge and yet is easy to resharpen!
grind- a full flat grind, sharpened on a DMT 325 diamond hone with micro bevels, to an aggressive razor edge
finish- 600 grit handsanded finish, then etched in ferric to bring out the hardening line and then buffed
handle- cocobolo with a brass guard and bin, with a tung oil finish
sheath- clean, dyed leather 10-12 ounce, glued and stitched, with 3 copper rivets for the belt loop so you cant cut the stitching if you have to sheath your knife in a hurry or in the cold
weight - 5.3 ounces with the sheath
$275 shipped in the us I can accept paypal Joe357m@bresnan.net or money order. There are a couple others on my website, and can be purchased there at https://caltoncutlery.com international friends please email me for a quote for usps shipping.
1st to post "I'll take it" gets it!!! There are also a couple more similar on my website at https://caltoncutlery.com
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
OAL- 8"
blade- 3 5/8" long tip to scales, .087" thick at the spine, .037" measured 1/4" behind the edge, and .010" thick at the shoulder of the edge. 3/4" wide
steel- 1095 high carbon steel, triple edge quenched and tempered, for a really nice performing blade that takes and holds a great edge and yet is easy to resharpen!
grind- a full flat grind, sharpened on a DMT 325 diamond hone with micro bevels, to an aggressive razor edge
finish- 600 grit handsanded finish, then etched in ferric to bring out the hardening line and then buffed
handle- cocobolo with a brass guard and bin, with a tung oil finish
sheath- clean, dyed leather 10-12 ounce, glued and stitched, with 3 copper rivets for the belt loop so you cant cut the stitching if you have to sheath your knife in a hurry or in the cold
weight - 5.3 ounces with the sheath
$275 shipped in the us I can accept paypal Joe357m@bresnan.net or money order. There are a couple others on my website, and can be purchased there at https://caltoncutlery.com international friends please email me for a quote for usps shipping.
1st to post "I'll take it" gets it!!! There are also a couple more similar on my website at https://caltoncutlery.com
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
Last edited:
