Fitch, Lozier, Campbell, three hunters

[Gary W. Graley]

See new Thread


Fitch Hunter is now SOLD
Ok on the Fitch stag handled hunter, price shipped now at $400 even, includes Priority mail shipping and insurance in the USA
John Fitch;
Hunter with sambar stag
blade 5 3/16" long of forged 1084 steel
comes with a nicely tooled sheath from Kenny Rowe
knife is in unused condition.
Price shipped in the USA is $500...Price drop to $450, Price drop to $425
Link, Link, Link
here is a shot showing the cleanly done mortise to the handle, the left side was cut out for the
tang to be set into the scale which makes for a very comfortable grip on this handle. Link

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

Hunter now at $300 shipped in the USA now at $275 price drop now at $250

A hunter by Don Lozier
Blade is ATS-34 measured at 3 3/4" long, mirror polished and file work down the spine of the blade
Handle is a nice Desert Ironwood measured at 4 1/2" long, also stainless dovetailed bolsters and mosaic pins.
and nicely tapered tang as well.
includes sheath

Price shipped in the USA is $350

Hunter

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

John Campbell hails from Colorado, this is a very comfortable size knife and quite pointy!
The mirror polished blade is about 4 1/2" long of 440C steel, deeply hollow ground handle is an african hardwood with brass guard and pins
Sheath also by maker
Knife is in unused condition
On the makers name side the guard where it is pinned in place you can see
an out line around the pin about halfway round, doesn't hurt the use of the
knife but wanted to indicate that it's not a hidden pin.

Well I tried sanding down the guard a little and the slight line is still there
but the guard shows some sanding, I polished it out some, still a great knife but
the guard isn't as new now, my fault, Price shipped dropped down to $100 with sheath in the USA

Price shipped in the USA is $175

The gap is quite small and of course doesn't affect the knife's performance, here is a shot a little further away for better perspective;

No trades or paypal on this, money order only, please include your forum name when emailing.
Thanks,
G2

 

[Gary W. Graley]

The Fitch stag hunter, still in unused condition, but I wanted to see how the edge profile was on this one
and took it to a corner of a book, which is a good
way to see if your knife has the right profile, it should be able to push cut
down through the pages cleanly, this did and it also shaves hair pretty slick too

So, a corner is off my book, "The Perfect Storm" based on a true story, being
an old Navy guy, that story always interested me as my ship went to the north Atlantic to see if it could
weather a storm, which to my way of thinking is a bad way to prove a point,
but as Captain Ron always, says, "if anything's gonna happen, it's gonna happen out there"...

G2

 

[lthrstkg]

I will take the Fitch Hunter

 

[Gary W. Graley]

I will take the Fitch Hunter

Knife is now SOLD, thanks,
G2

 

[Gary W. Graley]

UP for the Sunday night crowd,
G2

 

[Gary W. Graley]

Lozier Hunter and Campbell are still available, both are at excellent prices
which includes shipping in the USA.
G2