Need to thin the ever-growing herd, so here are some custom knives to move on - last chance to pick up one (or more) of these before Christmas.
All are unused, in original condition. All are below original cost, some at a very significant discount.
Prices include shipping to the US. First to post I’ll take it, gets it. Follow up with an email for payment details. Will accept paypal, but you can reduce price by 2.5% if paying by check or mail order.
Willing to offer some discounts for multiple purchases.
Ben Tendick Monster Bowie – 14" blade, 20" overall, differentially tempered 5160, elk antler handle, leather sheath with rattlesnake inlay, guard, handle butt cap and belt stud are hammered and blued mild steel - $500 (Original price was $675!)
Huge Chris Cody knife in 0.2" CPM 3V steel - $350 (I paid over $400). This is blade heavy and a dedicated chopper. Blade is 14" long, and you can see in the comparison shot at the bottom that this is larger than a Busse Killa Zilla or Scrapyard 1311. The handle is brown canvas micarta with a black paper micarta bolster. The smaller knife was made from the same billet of 3V as the chopper and comes with it and sheath for free. There is no sheath for the chopper.
Beast of a bowie forged from 5160 by GL Drew. Blade is around 12" long, and 0.25" thick, tapering slightly. Handle is a buffalo leg bone. Very agricultural looking, but surprising nimble in the hand - balance is right under the hook at the top of the s-guard. $290
Dan Graves small EDC fixed blade, 1080/15n20 damascus, nickel silver guard, sterling silver ferrule, fossil walrus ivory handle, cutting edge length right at 3” - $130
Michael Morris single-edge Pusher file knife, ironwood handle and mosaic pins, with original leather and custom kydex sheaths, cutting edge is just under 3”. $90
Jay Woytaz 3/16” O1 Scout (PSK), black micarta with coyote tan G10 liners and coyote kydex sheath, blade is just under 4” long. $120
Finally two custom damascus folders. Both of these are catch and release - both very nice knives, but I was going to display them rather than use, and they would probably be better served in someone else's hands.
Milan Mozolic large damascus liner lock with redwood burl and aged bronze handle, titanium liners - $375
Scales: Stabilized redwood burl and patinated bronze
Blade: W5 and L6 steel. Flat grind.
Liners: Titanium 6AL4V
Center pivot 6mm/0,236" stainless steel. Stop pin 3mm/0,118" stainless steel.
Teflon washers.
Full leght: 224mm/8,819"
Blade: 96mm/3,78"
Closed: 129mm/5,079"
Szilard large (95mm blade) damascus and antler friction folder - $190
All are unused, in original condition. All are below original cost, some at a very significant discount.
Prices include shipping to the US. First to post I’ll take it, gets it. Follow up with an email for payment details. Will accept paypal, but you can reduce price by 2.5% if paying by check or mail order.
Willing to offer some discounts for multiple purchases.
Ben Tendick Monster Bowie – 14" blade, 20" overall, differentially tempered 5160, elk antler handle, leather sheath with rattlesnake inlay, guard, handle butt cap and belt stud are hammered and blued mild steel - $500 (Original price was $675!)
Huge Chris Cody knife in 0.2" CPM 3V steel - $350 (I paid over $400). This is blade heavy and a dedicated chopper. Blade is 14" long, and you can see in the comparison shot at the bottom that this is larger than a Busse Killa Zilla or Scrapyard 1311. The handle is brown canvas micarta with a black paper micarta bolster. The smaller knife was made from the same billet of 3V as the chopper and comes with it and sheath for free. There is no sheath for the chopper.
Beast of a bowie forged from 5160 by GL Drew. Blade is around 12" long, and 0.25" thick, tapering slightly. Handle is a buffalo leg bone. Very agricultural looking, but surprising nimble in the hand - balance is right under the hook at the top of the s-guard. $290
Dan Graves small EDC fixed blade, 1080/15n20 damascus, nickel silver guard, sterling silver ferrule, fossil walrus ivory handle, cutting edge length right at 3” - $130
Michael Morris single-edge Pusher file knife, ironwood handle and mosaic pins, with original leather and custom kydex sheaths, cutting edge is just under 3”. $90
Jay Woytaz 3/16” O1 Scout (PSK), black micarta with coyote tan G10 liners and coyote kydex sheath, blade is just under 4” long. $120
Finally two custom damascus folders. Both of these are catch and release - both very nice knives, but I was going to display them rather than use, and they would probably be better served in someone else's hands.
Milan Mozolic large damascus liner lock with redwood burl and aged bronze handle, titanium liners - $375
Scales: Stabilized redwood burl and patinated bronze
Blade: W5 and L6 steel. Flat grind.
Liners: Titanium 6AL4V
Center pivot 6mm/0,236" stainless steel. Stop pin 3mm/0,118" stainless steel.
Teflon washers.
Full leght: 224mm/8,819"
Blade: 96mm/3,78"
Closed: 129mm/5,079"
Szilard large (95mm blade) damascus and antler friction folder - $190
Last edited:
